Reference.com

16 results for: cyclopean

Displaying 2 best matches. Browse all 16 results below.

Cyclopean

Columbia Electronic Encyclopedia - Cite This Source

Cyclopean, name often applied to a primitive method of prehistoric masonry construction, found throughout Greece, Italy, and the Middle East. The term is derived from Cyclopes, the mythological beings who were supposed to have built walls in this manner. The Cyclopean technique involves the use of huge, irregular boulders, carefully fitted together without the use of mortar, thereby creating a massive wall with an uneven face. These walls were characteristic of Mycenaean civilization. Remaining examples are found at Knossos, Mycenae, Tiryns, and Athens. There are many Cyclopean walls in Etruscan and Anatolian architecture. Somewhat similar examples are seen in China, Japan, and Peru.

The Columbia Electronic Encyclopedia Copyright © 2004, Columbia University Press.
Licensed from Columbia University Press

Cyclopean masonry

Wikipedia, the free encyclopedia - Cite This Source

Cyclopean masonry is a type of stonework found in Mycenaean architecture, built with huge limestone boulders, roughly fitted together with minimal clearance between adjacent stones and no use of mortar. The boulders are typically unworked, but are sometimes roughly worked with a hammer, and the gaps between boulders are often filled in with smaller hunks of limestone.

The most famous examples of Cyclopean masonry are found in the walls of Mycenae and Tiryns, and the style is characteristic of Mycenaean fortifications. Similar styles of stonework are found in other cultures.

The term comes from the classical Greeks' belief that only the mythical Cyclopes had the strength to move the enormous boulders that made up the walls of Mycenae and Tiryns.

Current definitions of Cyclopean masonry

"The walls are usually founded in extremely shallow beddings carved out of the bedrock. 'Cyclopean', the term normally applied to the masonry style characteristic of Mycenaean fortification systems, describes walls built of huge, unworked limestone boulders which are roughly fitted together. Between these boulders, smaller hunks of limestone fill the interstices. The exterior faces of the large boulders may be roughly hammer-dressed, but the boulders themselves are never carefully cut blocks. Very large boulders are typical of the Mycenaean walls at Mycenae, Tiryns, Argos, Krisa (in Phocis), and the Athenian Acropolis. Somewhat smaller boulders occur in the walls of Midea, whereas large limestone slabs are characteristic of the walls at Gla. Cut stone masonry is used only in and around gateways, conglomerate at Mycenae and Tiryns and perhaps both conglomerate and limestone at Argos." .

Outdated definitions of the Cyclopean style

Harry Thurston Peck, writing in 1898, divided Cyclopean masonry into four categories or styles:

  1. The first style, which is the oldest, consists of unwrought stones of various sizes in which the gaps are, or were, filled with small stones.
  2. The second is characterized by polygonal stones, which fit into each other with precision.
  3. The third style includes structures in Phocis, Boeotia and Argolis. It is characterized by work made in courses, and by stones of unequal size, but of the same height. This category includes the walls of Mycenae, the Lion Gate and the Treasury of Atreus .
  4. The fourth style is characterized by horizontal courses of masonry, not always of the same height, but of stones which are all rectangular. This style is common in Attica.

While Peck's first and possibly second and third styles conforms to what archaeologists today would classify as cyclopean, the fourth is now referred to as ashlar and is not considered cyclopean. There is a more detailed description of the Cyclopean styles at the Perseus Project .

Historical accounts

Pausanias described the Cyclopean walls of Mycenae and Tiryns:

There still remain, however, parts of the city wall [of Mycenae], including the gate, upon which stand lions. These, too, are said to be the work of the Cyclopes, who made for Proetus the wall at Tiryns. (2.16.5)

''Going on from here and turning to the right, you come to the ruins of Tiryns. ... The wall, which is the only part of the ruins still remaining, is a work of the Cyclopes made of unwrought stones, each stone being so big that a pair of mules could not move the smallest from its place to the slightest degree. Long ago small stones were so inserted that each of them binds the large blocks firmly together. (2.25.8)

Modern archaeologists use "Cyclopean" in a more restricted sense than Pausanias' description; while Pausanias attributes all of the fortifications of Tiryns and Mycenae, including the Lion Gate, to the Cyclopes, only parts of these walls are built in Cyclopean masonry. The photo at left shows the difference between Cyclopean masonry (shown in the blue rectangle), and the ashlar masonry of the Lion Gate.

Locations of Cyclopean structures

Apart from the Tirynthian and Mycenaean walls, other Cyclopean structures include some tholos tombs in Greece and the fortifications of a number of Mycenaean sites, most famously at Gla.

The Nuraghe of Bronze age Sardinia are also described as being constructed in cyclopean masonry.

References

External links

Wikipedia, the free encyclopedia © 2001-2006 Wikipedia contributors (Disclaimer)
This article is licensed under the GNU Free Documentation License.
Last updated on Sunday March 09, 2008 at 04:11:40 PDT (GMT -0700)
View this article at Wikipedia.org - Edit this article at Wikipedia.org - Donate to the Wikimedia Foundation

15 More from Wikipedia »


All 16 results for: cyclopean

View results from: Dictionary | Thesaurus | Encyclopedia | All Reference | the Web

Perform a new search, or try your search for "cyclopean" at: