Rheology encyclopedia topics

Scope

In practice, rheology is principally concerned with extending the "classical" disciplines of elasticity and (Newtonian) fluid mechanics to materials whose mechanical behavior cannot be described with the classical theories. It is also concerned with establishing predictions for mechanical behavior (on the continuum mechanical scale) based on the micro- or nanostructure of the material, e.g. the molecular size and architecture of polymers in solution or the particle size distribution in a solid suspension. Materials flow when subjected to a stress, that is a force per area. There are different sorts of stress and materials can respond in various ways, so much of theoretical rheology is concerned with forces and stresses.

Continuum mechanics	Solid mechanics or strength of materials	Elasticity
		Plasticity	Rheology
	Fluid mechanics	Non-Newtonian fluids
		Newtonian fluids

Rheology unites the seemingly unrelated fields of plasticity and non-Newtonian fluids by recognizing that both these types of materials are unable to support a shear stress in static equilibrium. In this sense, a plastic solid is a fluid. Granular rheology refers to the continuum mechanical description of granular materials.

One of the tasks of rheology is to empirically establish the relationships between deformations and stresses, respectively their derivatives by adequate measurements. These experimental techniques are known as rheometry and are concerned with the determination with well-defined rheological material functions. Such relationships are then amenable to mathematical treatment by the established methods of continuum mechanics.

The characterisation of flow or deformation originating from a simple shear stress field is called shear rheometry (or shear rheology). The study of extensional flows is called extensional rheology. Shear flows are much easier to study and thus much more experimental data are available for shear flows than for extensional flows.

Rheologist

A rheologist is an interdisciplinary scientist who studies the flow of complex liquids or the deformation of soft solids. It is not taken as a primary degree subject, and there is no general qualification. He or she will usually have a primary qualification in one of several fields: mathematics, the physical sciences, engineering, medicine, or certain technologies, notably materials or food. A small amount of rheology may be given during the first degree, but the professional will extend this knowledge during postgraduate research or by attending short courses and by joining one of the professional associations (see below).

Applications

Rheology has applications in engineering, geophysics, physiology and pharmaceutics. In engineering, it affects the production and use of polymeric materials, but plasticity theory has been similarly important for the design of metal forming processes. Many industrially important substances such as concrete, paint and chocolate have complex flow characteristics. Geophysics includes the flow of lava, but in addition measures the flow of solid Earth materials over long time scales: those that display viscous behaviour, e.g. granite , are known as rheids. In physiology, many bodily fluids are have complex compositions and thus flow characteristics. In particular there is a specialist study of blood flow called hemorheology. The term biorheology is used for the wider field of study of the flow properties of biological fluids.

Elasticity, viscosity, solid- and liquid-like behavior, plasticity

One generally associates liquids with viscous behaviour (a thick oil is a viscous liquid) and solids with elastic behaviour (an elastic string is an elastic solid). A more general point of view is to consider the material behaviour at short times (relative to the duration of the experiment/application of interest) and at long times.Liquid and solid character are relevant at long times:

We consider the application of a constant stress (a so-called creep experiment):

if the material, after some deformation, eventually resists further deformation, it is considered a solid
if, by contrast, the material flows indefinitely, it is considered a liquidBy contrast, elastic and viscous (or intermediate, viscoelastic) behaviour is relevant at short times (transient behaviour):

We again consider the application of a constant stress:

if the material deformation follows the applied stress, then the material is purely elastic
if the deformation increases linearly at constant stress, then the material is viscous
if neither the deformation with time, nor its derivative (deformation rate) follows the stress, the material is viscoelasticPlasticity is equivalent to the existence of a yield stress:

A material that behaves as a solid under low applied stresses may start to flow above a certain level of stress, called the yield stress of the material. The term plastic solid is often used when this plasticity threshold is rather high, while yield stress fluid is used when the threshold stress is rather low. There is no fundamental difference, however, between both concepts.

Dimensionless numbers in rheology

Deborah number

When the rheological behavior of a material includes a transition from elastic to viscous as the time scale increase (or, more generally, a transition from a more resistant to a less resistant behavior), one may define the relevant time scale as a relaxation time of the material. Correspondingly, the ratio of the relaxation time of a material to the timescale of a deformation is called Deborah number. Small Deborah numbers correspond to situations where the material has time to relax (and behaves in a viscous manner), while high Deborah numbers correspond to situations where the material behaves rather elastically.

Note that the Deborah number is relevant for materials that flow on long time scales (like a Maxwell fluid) but not for the reverse kind of materials (like the Voigt or Kelvin model) that are viscous on short time scales but solid on the long term.Reynolds number

In fluid mechanics, the Reynolds number is a measure of the ratio of inertial forces (v_sρ) to viscous forces (μ/L) and consequently it quantifies the relative importance of these two types of effect for given flow conditions. Under low Reynolds numbers viscous effects dominate and the flow is laminar, whereas at high Reynolds numbers inertia predominates and the flow may be turbulent. However, since rheology is concerned with fluids which do not have a fixed viscosity, but one which can vary with flow and time, calculation of the Reynolds number can be complicated.

It is one of the most important dimensionless numbers in fluid dynamics and is used, usually along with other dimensionless numbers, to provide a criterion for determining dynamic similitude. When two geometrically similar flow patterns, in perhaps different fluids with possibly different flow rates, have the same values for the relevant dimensionless numbers, they are said to be dynamically similar.

Typically it is given as follows: