Reverse telnet

Wikipedia, the free encyclopedia - Cite This Source

Reverse Telnet is a specialized application of [

], where the server side of the connection reads and writes data to a TTY line (RS-232 serial port), rather than providing a command shell (which is a more common application for telnet). Typically, reverse telnet is implemented on an embedded device (e.g. terminal/console server), which has an Ethernet network interface and serial port(s). Through the use of reverse telnet on such a device, IP-networked users can use telnet to access serially-connected devices.

In the past, reverse telnet was typically used to connect to modems or other external asynchronous devices. Today, reverse telnet is used mostly for connecting to the console port of a router, switch or other device.

Example

On the client, the command line for initiating a "reverse telnet" connection might look like this:

telnet 172.16.1.254 2002

(The syntax in the above example would be valid for the command-line telnet client packaged with many operating systems, including most Unices, or available as an option or add-on.)

In this example, 172.16.1.254 is the IP address of the server, and 2002 is the TCP port associated with a TTY line on the server.

A typical server configuration on a Cisco router would look like this:

version 12.3

service timestamps debug uptime

service timestamps log uptime

no service password-encryption

hostname Terminal_Server

ip host Router1 2101 8.8.8.8

ip host Router2 2102 8.8.8.8

ip host Router3 2113 8.8.8.8

interface Loopback0

 description Used for Terminal Service

 ip address 8.8.8.8 255.255.255.255

line con 0

 exec-timeout 0 0

 password MyPassword

 login

line 97 128

 transport input telnet

line vty 0 4

 exec-timeout 0 0

 password MyPassword

 login

 transport input none

end

Reverse telnet

Example

See also