Ramie (Boehmeria nivea) is a flowering plant in the nettle family Urticaceae, native to eastern Asia. It is a herbaceous perennial growing to 1 - 2.5 m tall; the leaves are heart-shaped, 7-15 cm long and 6-12 cm broad, and white on the underside with dense small hairs - this gives it a silvery appearance; unlike nettles, the hairs do not sting. The true ramie or China Grass also called Chinese plant or white ramie is the Chinese cultivated plant. A second type, is known as green ramie or rhea and is believed to have originated in the Malay Peninsula. This type has smaller leaves which are green on the underside and it appears to be better suited to tropical conditions.
Harvesting is done just before or soon after the beginning of flowering. It is done at this time because at this stage there is a decline in plant growth and the maximum fiber content is achieved. Stems are harvested by either cutting just above the lateral roots or else bending the stem. This will enable the core to be broken and the cortex can be stripped from the plant in situ.
After harvesting, stems are decorticated while the plants are fresh. If this is not done while the plants are still fresh the plants will dry out and the bark will be hard to remove. The bark ribbon is then dried as quickly as possible. This will prevent bacteria and fungi from attacking it.
The dry weight of harvested stem from crops ranges from 3.4 to 4.5 t/ha/year, so a 4.5 ton crop yields 1,600 kg/ha/year of dry non-de-gummed fiber. The weight loss during de-gumming can be up to 25% giving a yield of de-gummed fiber of about 1,200 kg/ha/year.
The extraction of the fiber occurs in three stages. First the cortex or bark is removed; this can be done by hand or by machine. This process is called de-cortication. Second the cortex is scraped to remove most of the outer bark, the parenchyma in the bast layer and some of the gums and pectins. Finally the residual cortex material is washed, dried, and de-gummed to extract the spinnable fiber.
Brazil began production in the late 1930s with production peaking in 1971. Since then, production has steadily declined as a result of competition with alternative crops, such as soybeans and the important synthetic fibres.They used it in Ancient China for the farmers clothes.
Despite its strength, ramie has had limited acceptance for textile use. The fiber's extraction and cleaning are expensive, chiefly because of the several steps—involving scraping, pounding, heating, washing, or exposure to chemicals. Some or all are needed to separate the raw fiber from the adhesive gums or resins in which it is ensheathed. Spinning the fiber is made difficult by its brittle quality and low elasticity; and weaving is complicated by the hairy surface of the yarn, resulting from lack of cohesion between the fibers. The greater utilization of ramie depends upon the development of improved processing methods.
Ramie is used to make such products as industrial sewing thread, packing materials, fishing nets, and filter cloths. It is also made into fabrics for household furnishings (upholstery, canvas) and clothing, frequently in blends with other textile fibers (for instance when used in admixture with wool, shrinkage is reported to be greatly reduced when compared with pure wool.) Shorter fibres and waste are used in paper manufacture.
Ramie is also used as an ornamental plant in eastern Asia.
China leads in the production of ramie and exports mainly to Japan and Europe. Other producers include Japan, Taiwan, the Philippines, and Brazil. Only a small percentage of the ramie produced is available on the international market. Japan, Germany, France and the UK are the main importers, the remaining supply is used domestically.
Effect of mercerization on the crosslinking of ramie fabric using 1,2,3,4-butanetetracarboxylic acid: Physical properties and crosslink distribution
Sep 01, 2002; ABSTRACT Ramie, tension-mercerized Ramie, slack-mercerized Ramie, and cotton fabrics are treated with...