Definitions

molding

molding

[mohl-ding]
molding, in architecture, furniture, and decorative objects, a surface or group of surfaces of projecting or receding contours. A molding may serve as a defining element, terminating a unit or an entire composition (e.g., in the cap of a column or the crowning cornice of a building) or establishing a boundary or transition between portions of a design. One of the primary considerations in the design of a molding is the type of shadow it will cast. The shape of a molding is termed its profile or section. Moldings formed an important part of most past styles; in Babylonia, Assyria, and Persia, however, their place was taken by flat ceramic enrichments in color. In Egypt, moldings were limited to the cove, or cavetto, and the half round, or torus, which, used together, formed the cornices for the walls of temple or pylon. Moldings were an essential feature of Greek orders and buildings. The Greek profiles form the basic molding vocabulary for classic types such as the fillet and the fascia, flat vertical surfaces; the ovolo, of an egglike convex outline; the bead and the torus, both convex, three fourths of a circle and one half, respectively; the cavetto, a quarter circle, and the scotia, of elliptical curvature, both concave; and the cyma recta and the cyma reversa, both of compound curvature, being half concave and half convex. The ovolo was carved with the alternating egg and dart; the acanthus leaf and the anthemion were used for the cyma recta, or ogee, and the water leaf for the cyma reversa. Roman designers, substituting simple segments of circles for the elliptical and parabolic curvatures, never attained the beauty of Greek forms, although in ornament they added numberless innovations. In Byzantine architecture the tendency was to flatten the classic outlines, transforming them into bands of pierced enrichment. Romanesque moldings were chiefly simple segments of a circle, as in the especially characteristic boltel, or three-quarter round. Moldings changed with the development of Gothic architecture. Cornices, jambs, archivolts, and capitals show a richly varied interplay between projecting rounds and deep concavities. In the late Gothic (15th cent.) of France and Germany there were ingenious combinations of differing elements to produce broken, merging, and interpenetrating moldings. In developed Gothic a rich assortment of naturalistic forms appeared, e.g., flowers and intertwining vines. The Renaissance return to purely Roman forms was followed in the baroque by heavier, projecting moldings, which cast dramatic shadows. Later a wide variety of styles was employed, but since the 19th cent., decorative molding has been little used in modern architecture.

Examples of common molding styles.

In architecture and the decorative arts, a defining, transitional, or terminal element that serves to contour or outline edges and surfaces. The surface of a molding may be plain or modeled with recesses and reliefs, which either maintain a constant profile along its length or are set in rhythmically repeated patterns. Types of flat or angular moldings are the fascia, chamfer (or bevel), and fillet (narrow band). Single curved moldings include the cavetto (concave, with a quarter-circle profile), scotia (deep concave), flute (grooved), ovolo (convex, with a quarter-circle profile), torus (semicircular convex), roll (rounded convex), and astragal (narrow semicircular convex). Among the most common compound moldings are the projecting, double-curved cyma recta or ogee, often used as a crown molding, and the cyma reversa, used for crown or base. The profiles of moldings are traditionally enhanced by flower or leaf forms, geometric motifs, or spirals.

Learn more about molding with a free trial on Britannica.com.

Molding or moulding (see spelling differences) can be:

See also

Search another word or see Moldingon Dictionary | Thesaurus |Spanish
Copyright © 2014 Dictionary.com, LLC. All rights reserved.
  • Please Login or Sign Up to use the Recent Searches feature