Mobarakeh Steel Company (MSC, , Foolad Mobarakeh) is an Iranian steel company, located 65 km south west of Esfahan, near the city of Mobarakeh, Esfahan Province, Iran. It is Iran's largest steel maker, and one of the largest industrial complexes operating in Iran. It was first commissioned after the Iranian Revolution in 1979 and officially initiated operations during 1993. Underwent major revamping during year 2000, and is presently schedule for a second and third revamping, due in 2009 - 2010, bringing the total steel output to 7,200,000 metric tons per year. The company owns the successful football club, Sepahan F.C..
Production Processes: Overview
MSC’s iron ore
(raw material) comes from mines in Golgohar and Chadermaloo (Kerman
provinces) and are converted to pellets in the Pelletizing Plant
(diameters: 8-10 mm). After being reduced in the Direct Reduction (DR) Plant and removed of oxygen, pellets are converted to (sponge iron
). Sponge iron and iron scrap
is melted in electric arc furnaces
, after which liquid steel is purified in secondary purification units. The steel’s chemical compound is designed by customer demand. Then, it’s transported to casting machines for slab
production. After cooling, slab is rolled at the Hot Rolling mill
, creating hot coils (thickness: 1.5-16mm). Some are sold; other go to the Hot finishing mill for complementary work and hot sheet transformation or the cold rolling
mill to lower strip thickness to 0.18mm. Coldrolled coils are also dedicated for the Tinning
, and prepainting lines.
Iron Plant Complex
The Iron Plant Complex has 10 main production line units (the rest are auxiliary and back up units). Iron ores with large grains from Golgohar are converted by ball mills in the Pelletizing plant. After mixing with Chadermalou's smaller grains and bentonite in blending machines it's changed to pellets (diameter: 6-25 mm) and screened by a two-story roller screen. Pellets solidify in an induration tunnel or furnace at 1280° C. The Lime Production Plant receives limestone
from the Hozmahi mine, which is then calcinated
in two rotary kilns at 780-1050° C. After screening, calcinated lime may be used in the Lime Plant, consumed in the Palletizing Plant, Briquet Unit or for industrial water production.
At the Direct Reduction plant, pellets are charged in Midrex shaft furnaces after misco-grain screening (less than 5mm). Two reducing gases (derived from cracking natural gas
, consisting of Co and H2) are injected into the furnace, combine with oxygen from the pellets resulting in CO2+H2O. Without oxygen, pellets become sponge irons. After screening, sponge irons are transferred to the Steel Plant. Sponge irons with a diameter less than 5 mm go to the briquet unit to produce briquets (diameter above 25 mm). Then, they are transferred to the Steel Plant with the sponge iron.
Steel Making and Continuous Casting Plant
The Steel Making & Continuous Casting Plant has eight electric arc furnaces receiving sponge iron and other additives. They are melted with about 15% scrap in the furnace, which has a capacity of 180-200 tons. The plant also has four (to be increased to eight in current revamping) ladle
furnaces and one (to be doubled) degassing vessel, used to adjust the final chemical mix and purity, as well as adjusting casting temperature. Additionally, there are four continuous slab casting machines, each having two arc casting strands (radius: 10.5 m). They produce the plant’s final product, called slabs. These slabs are 10 m in length, 20 cm in thickness and 65-188 cm (adjustable) width. Slab production capacity is 4,200,000 t/yr (revamping year 2000), to be increase in steps to 5,400,000 and 7,200,000 MTPY. Slabs are manually cooled and scrafed in the Slab Cooling & Conditioning plant.
Mobarakeh Steel Company products
MSCs products consist of hot and cold rolled sheets and coils, pickled coils, narrow strip coil, tinplate sheet and coil galvanized coil, prepanted coil and slab. These products are produced according to national and international standards. They meet the needs of various industries such as: automotive, home appliances, pipe making, pressure vessels, foodstuff, chemical material and medical packing, construction, transportation, naval industries, and heavy metal equipment.
Expenses and Investment: 2007
|| Cost |
| Waste Water Treatment Units
|| 37,710,000,000 Rials |
| Correction fans (furnaces 1,2,7,8)
|| 11,874,456,000 Rials |
| Installing Dust collector (Palletizing unit)
|| 1,244,484,380 Rials |
| Water spraying Equipment on deposits
|| 630,000,000 Rials |
| Screen dust collector (DR)
|| 2,170,000,000 Rials |
| Correcting Palletizing dust collector
|| 11,378,860,000 Rials |
| Environmental Plans
|| 16,755,000,000 Rials |
|| 91,752,800,380 Rials |
1. above expenses does not include current and research expenses.
Since the Tehran Metal Exchange was launched in 2003
, MSC has supplied products through this exchange via brokers involved at prices specified by the exchange’s mechanisms. Interested buyers contact brokers, inform the amount of their requirement, offer prices, and get more information regarding the purchase.
Some products are sold directly to factories and plants via the sales departments under the following specifications: (1) applicant is a direct consumer; (2) applicant’s minimum annual consumption is 1,000 tons hotrolled and 500 tons coldrolled products; (3) ability to purchase on a regular basis. Documents needed to enroll include: (a) certified copies of Operation Permit or similar documents; (b) Applicant’s Memorandum of Establishment, as well as latest changes in its Board of Directors; and (c) a purchase application form. Additionally, MSC employs Service Centers based in 11 Iranian provinces.
department has focused on increasing confidence in international markets. It has attained a just-in-time delivery plan for markets in Europe, Canada, Latin America, South East Asia, the Middle East and Africa. To meet challenges confronting global markets and achieve new horizons, MSC’s export department consolidated efforts to maintain the supply of hotrolled coils and sheets as it’s export priority plan as well as the export of other products (i.e. coldrolled coil/sheets, pickled products, galvanized and pre-painted coils) to various regional markets.
During the first five months of the Iranian calendar year 1386 AP (March 21 to August 22, 2007), about 1.9 M/t of MSC products were transported to customers, with 460,000 tons of products worth more than $500 million exported. Over 14,000 tons of special products including ST52, coldrolled products, car bodies (MB), galvanized and color coated products were exported to various countries like Iraq, Pakistan, the United Arab Emirates, Italy and Armenia.
In 1999, MSC expanded its hotrolled coil capacity to 3.1 million
metric tons/yr from 2.5.Also, a sixth direct-reduced iron plant was proposed for Mobarakeh. In 2002, expansion of hot-rolled coil capacity increased to 4.2 Mt/yr from 3.1 Mt/yr. Additional proposed facilities included a 400,000-t/yr cold-rolled mill and a 120,000 t/yr tinplate line in addition to the development of the 3.2-Mt/yr Chegharat iron mine.
MSC ordered engineering for an increase of total production in two steps : 5,400,000 and 7,200,000 metric tons/yr
|| Thickness |
| Iron Plant
|| sponge iron
|| T |
| Steel Plant
|| steel, iron scrap
|| 2200 mm |
| Hot strip mill
|| 4 furnaces
|| 1.5-16 mm |
| Cold rolling mill
|| coil, sheet
|| T |
| Tinning Line
|| coil sheet
|| electrolytic cleaning
|| T |
| Galvanizing line
|| hot dipping
|| T |
| Compact Strip Plant
|| coils, sheets
|| T |
| Prepainting Line
|| Roller coating
|| T |
| Pelletizing Plant
|| 2200 mm |
| Direct-reduction Plant
|| sponge iron
| Limestone Plant
|| 2 rotary kilns