1 reference results for: Logic level
Wikipedia
In digital circuits, a logic level is a particular state that a particular signal can have. Logic levels are usually represented by the voltage difference between the signal and a common reference point (usually ground), however other standards exist. The exact range of voltage level that represent each state depends on the particular technology being used (see Digital logic#Logic voltage levels).
The two most common logic levels are logical high and logical low, which generally correspond to a binary 1 and 0 respectively (however, see Active low). Signals with one of these two levels can be used in boolean logic for digital circuit design or analysis.
In three-state logic, a signal can also be high impedance, which means it is not actively asserting either a high or a low logic level.
See also
Wikipedia, the free encyclopedia © 2001-2006 Wikipedia contributors (Disclaimer)
This article is licensed under the GNU Free Documentation License.
Last updated on Tuesday December 18, 2007 at 13:19:34 PST (GMT -0800)
View this article at Wikipedia.org - Edit this article at Wikipedia.org - Donate to the Wikimedia Foundation
This article is licensed under the GNU Free Documentation License.
Last updated on Tuesday December 18, 2007 at 13:19:34 PST (GMT -0800)
View this article at Wikipedia.org - Edit this article at Wikipedia.org - Donate to the Wikimedia Foundation
Copyright © 2008, Dictionary.com, LLC. All rights reserved.











