Added to Favorites

Related Searches

Definitions

Nearby Words

inequality, in mathematics, statement that a mathematical expression is less than or greater than some other expression; an inequality is not as specific as an equation, but it does contain information about the expressions involved. The symbols > (less than), < (greater than), ≤ (less than or equal to), and ≥ (greater than or equal to) are used in place of the equals sign in expressions of inequalities. As in the case of equations, inequalities can be transformed in various ways. The direction of the inequality remains unchanged if some number is added to both sides or subtracted from both sides or if both sides are multiplied or divided by some positive number; e.g., subtracting 10 from both sides of the inequality *x* > 8 gives *x* - 10 > -2, and multiplying the inequality by 2 gives 2*x* > 16. Multiplication or division by a negative number reverses the sign of the inequality; e.g., if -2*x* > 8, then dividing both sides by -2 results in the inequality *x* < -4.

The Columbia Electronic Encyclopedia Copyright © 2004.

Licensed from Columbia University Press

Licensed from Columbia University Press

In mathematics, an inequality is a statement about the relative size or order of two objects, or about whether they are the same or not (See also: equality)

- The notation a < b means that a is less than b.
- The notation a > b means that a is greater than b.
- The notation a ≠ b means that a is not equal to b, but does not say that one is bigger than the other or even that they can be compared in size.

In all these cases, a is not equal to b, hence, "inequality".

These relations are known as strict inequality; in contrast

- The notation a ≤ b means that a is less than or equal to b (or, equivalently, not greater than b);
- The notation a ≥ b means that a is greater than or equal to b (or, equivalently, not smaller than b);

An additional use of the notation is to show that one quantity is much greater than another, normally by several orders of magnitude.

- The notation a ≪ b means that a is much less than b.
- The notation a ≫ b means that a is much greater than b.

If the sense of the inequality is the same for all values of the variables for which its members are defined, then the inequality is called an "absolute" or "unconditional" inequality. If the sense of an inequality holds only for certain values of the variables involved, but is reversed or destroyed for other values of the variables, it is called a conditional inequality.

An inequality may appear unsolvable because it only states whether a number is larger or smaller than another number; but it is possible to apply the same operations for equalities to inequalities. For example, to find x for the inequality 10x > 23 one would divide 23 by 10.

The trichotomy property states:

- For any real numbers, a and b, exactly one of the following is true:
- a < b
- a = b
- a > b

The transitivity of inequalities states:

- For any real numbers, a, b, c:
- If a > b and b > c; then a > c
- If a < b and b < c; then a < c

The properties which deal with addition and subtraction state:

- For any real numbers, a, b, c:
- If a > b, then a + c > b + c and a − c > b − c
- If a < b, then a + c < b + c and a − c < b − c

i.e., the real numbers are an ordered group.

The properties which deal with multiplication and division state:

- For any real numbers, a, b, c:

More generally this applies for an ordered field, see below.

The properties for the additive inverse state:

- For any real numbers a and b
- If a < b then −a > −b
- If a > b then −a < −b

The properties for the multiplicative inverse state:

- For any real numbers a and b that are both positive or both negative
- If a < b then 1/a > 1/b
- If a > b then 1/a < 1/b

Any strictly monotonically increasing function may be applied to both sides of an inequality and it will still hold. Applying a strictly monotonically decreasing function to both sides of an inequality means the opposite inequality now holds. The rules for additive and multiplicative inverses are both examples of applying a monotonically decreasing function.

If you have a non-strict inequality (a ≤ b, a ≥ b) then:

- Applying a monotonically increasing function preserves the relation (≤ remains ≤, ≥ remains ≥)
- Applying a monotonically decreasing function reverses the relation (≤ becomes ≥, ≥ becomes ≤)

It will never become strictly unequal, since, for example, 3 ≤ 3 does not imply that 3 < 3.

- a ≤ b implies a + c ≤ b + c;
- 0 ≤ a and 0 ≤ b implies 0 ≤ a × b.

Note that both (Q, +, ×, ≤) and (R, +, ×, ≤) are ordered fields, but ≤ cannot be defined in order to make (C, +, ×, ≤) an ordered field, because −1 is the square of i and would therefore be positive.

The non-strict inequalities ≤ and ≥ on real numbers are total orders. The strict inequalities < and > on real numbers are .

The notation a < b < c stands for "a < b and b < c", from which, by the transitivity property above, it also follows that a < c. Obviously, by the above laws, one can add/subtract the same number to all three terms, or multiply/divide all three terms by same nonzero number and reverse all inequalities according to sign. But care must be taken so that you really use the same number in all cases, e.g. a < b + e < c is equivalent to a − e < b < c − e.

This notation can be generalized to any number of terms: for instance, a_{1} ≤ a_{2} ≤ ... ≤ a_{n} means that a_{i} ≤ a_{i+1} for i = 1, 2, ..., n − 1. By transitivity, this condition is equivalent to a_{i} ≤ a_{j} for any 1 ≤ i ≤ j ≤ n.

When solving inequalities using chained notation, it is possible and sometimes necessary to evaluate the terms independently. For instance to solve the inequality 4x < 2x + 1 ≤ 3x + 2, you won't be able to isolate x in any one part of the inequality through addition or subtraction. Instead, you can solve 4x < 2x + 1 and 2x + 1 ≤ 3x + 2 independently, yielding x < 1/2 and x ≥ -1 respectively, which can be combined into the final solution -1 ≤ x < 1/2.

Occasionally, chained notation is used with inequalities in different directions, in which case the meaning is the logical conjunction of the inequalities between adjacent terms. For instance, a < b > c ≤ d means that a < b, b > c, and c ≤ d. In addition to rare use in mathematics, this notation exists in a few programming languages such as Python.

There are many inequalities between means. For example, for any positive numbers a_{1}, a_{2}, …, a_{n} we have where

$H\; =\; frac\{n\}\{1/a\_1\; +\; 1/a\_2\; +\; cdots\; +\; 1/a\_n\}$ (harmonic mean), $G\; =\; sqrt[n]\{a\_1\; cdot\; a\_2\; cdots\; a\_n\}$ (geometric mean), $A\; =\; frac\{a\_1\; +\; a\_2\; +\; cdots\; +\; a\_n\}\{n\}$ (arithmetic mean), $Q\; =\; sqrt\{frac\{a\_1^2\; +\; a\_2^2\; +\; cdots\; +\; a\_n^2\}\{n\}\}$ (quadratic mean). ## Power inequalities

Sometimes with notation "power inequality" understand inequalities which contain a^{b}type expressions where a and b are real positive numbers or expressions of some variables. They can appear in exercises of mathematical olympiads and some calculations.### Examples

- If x > 0, then

- $x^x\; ge\; left(frac\{1\}\{e\}right)^\{1/e\}.,$

- If x > 0, then

- $x^\{x^x\}\; ge\; x.,$

- If x, y, z > 0, then

- $(x+y)^z\; +\; (x+z)^y\; +\; (y+z)^x\; >\; 2.,$

- For any real distinct numbers a and b,

- $frac\{e^b-e^a\}\{b-a\}\; >\; e^\{(a+b)/2\}.$

- If x, y > 0 and 0 < p < 1, then

- $(x+y)^p\; <\; x^p+y^p.,$

- If x, y, z > 0, then

- $x^x\; y^y\; z^z\; ge\; (xyz)^\{(x+y+z)/3\}.,$

- If a, b, then

- $a^b\; +\; b^a\; >\; 1.,$

- This result was generalized by R. Ozols in 2002 who proved that if a
_{1}, ..., a_{n}, then

- $a\_1^\{a\_2\}+a\_2^\{a\_3\}+cdots+a\_n^\{a\_1\}>1$

- (result is published in Latvian popular-scientific quarterly The Starry Sky, see references).

## Well-known inequalities

See also list of inequalities.

Mathematicians often use inequalities to bound quantities for which exact formulas cannot be computed easily. Some inequalities are used so often that they have names:

- Azuma's inequality
- Bernoulli's inequality
- Boole's inequality
- Cauchy–Schwarz inequality
- Chebyshev's inequality
- Chernoff's inequality
- Cramér-Rao inequality
- Hoeffding's inequality
- Hölder's inequality
- Inequality of arithmetic and geometric means
- Jensen's inequality
- Kolgomorov's inequality
- Markov's inequality
- Minkowski inequality
- Nesbitt's inequality
- Pedoe's inequality
- Triangle inequality

## Student Learning Techniques

Young students sometimes confuse the less-than and greater-than signs, which are mirror images of one another. A commonly taught mnemonic is that the sign represents the mouth of a hungry alligator that is trying to eat the larger number; thus, it opens towards 8 in both 3 < 8 and 8 > 3. Another method is noticing the larger quantity points to the smaller quantity and says, "ha-ha, I'm bigger than you."Also, on a horizontal number line, the greater than sign is the arrow that is at the larger end of the number line. Likewise, the less than symbol is the arrow at the smaller end of the number line (<---0--1--2--3--4--5--6--7--8--9--->).

The symbols may also be interpreted directly from their form - the side with a large vertical separation indicates a large(r) quantity, and the side which is a point indicates a small(er) quantity. In this way the inequality symbols are similar to the musical crescendo and decrescendo. The symbols for equality, less-than-or-equal-to, and greater-than-or-equal-to can also be interpreted with this perspective.

## Complex numbers and inequalities

By introducing a lexicographical order on the complex numbers, it is a totally ordered set. However, it is impossible to define ≤ so that $mathbb\{C\}$,+,*,≤ becomes an ordered field. If $mathbb\{C\}$,+,*,≤ were an ordered field, it has to satisfy the following two properties:- if a ≤ b then a + c ≤ b + c
- if 0 ≤ a and 0 ≤ b then 0 ≤ a b

Because ≤ is a total order, for any number a, a ≤ 0 or 0 ≤ a. In both cases 0 ≤ a

^{2}; this means that $i^2>0$ and $1^2>0$; so $1>0$ and $-1>0$, contradiction.However ≤ can be defined in order to satisfy the first property, i.e. if a ≤ b then a + c ≤ b + c. A definition which is sometimes used is the lexicographical order:

- a ≤ b if $Re(a)$ < $Re(b)$ or ($Re(a)\; =\; Re(b)$ and $Im(a)$ ≤ $Im(b)$)

It can easily be proven that for this definition a ≤ b then a + c ≤ b + c

## See also

- Linear inequality
- Binary relation
- Bracket for the use of the < and > signs as brackets
- Fourier-Motzkin elimination
- Inequation
- Interval (mathematics)
- Partially ordered set
- Relational operators, used in programming languages to denote inequality

## References

- Hardy, G., Littlewood J.E., Polya, G. (1999).
*Inequalities*. Cambridge Mathematical Library, Cambridge University Press. ISBN 0-521-05206-8. - Beckenbach, E.F., Bellman, R. (1975).
*An Introduction to Inequalities*. Random House Inc. ISBN 0-394-01559-2. - Drachman, Byron C., Cloud, Michael J. (1998).
*Inequalities: With Applications to Engineering*. Springer-Verlag. ISBN 0-387-98404-6. - Murray S. Klamkin "
*"Quickie" inequalities*". . - Harold Shapiro Mathematical Problem Solving.
*The Old Problem Seminar*. Kungliga Tekniska högskolan. . - 3rd USAMO. .
- "
*The Starry Sky*". .

## External links

- interactive linear inequality & graph at www.mathwarehouse.com
- Solving Inequalities
- WebGraphing.com – Inequality Graphing Calculator.
- Graph of Inequalities by Ed Pegg, Jr., The Wolfram Demonstrations Project.

Wikipedia, the free encyclopedia © 2001-2006 Wikipedia contributors (Disclaimer)

This article is licensed under the GNU Free Documentation License.

Last updated on Tuesday October 07, 2008 at 06:16:01 PDT (GMT -0700)

View this article at Wikipedia.org - Edit this article at Wikipedia.org - Donate to the Wikimedia Foundation

This article is licensed under the GNU Free Documentation License.

Last updated on Tuesday October 07, 2008 at 06:16:01 PDT (GMT -0700)

View this article at Wikipedia.org - Edit this article at Wikipedia.org - Donate to the Wikimedia Foundation

Copyright © 2014 Dictionary.com, LLC. All rights reserved.