Electrostatic induction is a redistribution of electrical charge in an object, caused by the influence of nearby charges. Induction was discovered by British scientist John Canton in 1753 and Swedish professor Johan Carl Wilcke in 1762. Electrostatic generators, such as the Wimshurst machine, the Van de Graaff generator and the electrophorus, use this principle. Electrostatic induction should not be confused with electromagnetic induction; both are often referred to as 'induction'.
A normal piece of matter has equal numbers of positive and negative electrical charges in each part of it, located close together, so no part of it has a net charge. When a charged object is brought near an uncharged electrically conducting object, such as a piece of metal, the force of the nearby charge causes a separation of these charges. For example, if a positive charge is brought near the object (see picture at right), the negative charges in the metal will be attracted toward it and move to the side of the object facing it, while the positive charges are repelled and move to the side of the object away from it. This results in a region of negative charge on the object nearest to the external charge, and a region of positive charge on the part away from it. If the external charge is negative, the polarity of the charged regions will be reversed. Since this is just a redistribution of the charges, the object has no net charge. This induction effect is reversible; if the nearby charge is removed, the attraction between the positive and negative internal charges cause them to intermingle again.
A minor correction to the above picture is that only the negative charges in matter, the electrons, are free to move; the positive charges, the atoms nuclei, are bound into the structure of solid matter. So all motion of charges is a result of the motion of electrons only. In the above example, the electrons move from the left side of the object to the right. However, when a number of electrons move out of an area, they leave an unbalanced positive charge due to the nuclei. So the movement of electrons creates both the positively and negatively charged regions described above.
However, the induction effect can also be used to put a net charge on an object. If, while it is close to the positive charge, the above object is momentarily connected through a conductive path to electrical ground, which is a large reservoir of both positive and negative charges, some of the negative charges in the ground will flow into the object, under the attraction of the nearby positive charge. When the contact with ground is broken, the object is left with a net negative charge.
This method can be demonstrated using a gold-leaf electroscope, which is an instrument for detecting electric charge. The electroscope is first discharged, and a charged object is then brought close to the instrument's top terminal. This causes a redistribution of the charges inside the electroscope's metal rod, so that the top terminal gains a net charge of opposite polarity to that of the object, while the gold leaves gain a charge of the same polarity. Since both leaves have the same charge, they repel each other and spread apart. The electroscope has not acquired a net charge: the charge within it has merely been redistributed, so if the charge were to be moved away from the electroscope the leaves will come together again.
But if an electrical contact is now briefly made between the electroscope terminal and ground, for example by touching the terminal with a finger, this causes charge to flow from ground to the terminal, attracted by the charge on the object close to the terminal. The electroscope now contains a net charge opposite in polarity to that of the charged object. When the electrical contact to earth is broken, e.g. by lifting the finger, the extra charge that has just flowed into the electroscope cannot escape, and the instrument retains a net charge. So the gold leaves remain separated even after the nearby charged object is moved away.
The sign of the charge left on the object after grounding is always opposite in sign from the external inducing charge.
WIPO ASSIGNS PATENT TO ASAHI GLASS FOR "PROCESS FOR MANUFACTURING ELECTRET, AND ELECTROSTATIC INDUCTION-TYPE CONVERSION ELEMENT" (JAPANESE INVENTOR)
Aug 27, 2010; GENEVA, Aug. 30 -- Publication No. WO/2010/095554 was published on Aug. 26. Title of the invention: "PROCESS FOR MANUFACTURING...
Publication No. WO/2010/032759 Published on March 25, Assigned to ASAHI GLASS for Electret, Electrostatic Induction Conversion Device (Japanese Inventor)
Mar 26, 2010; GENEVA, March 30 -- Kimiaki Kashiwagi, Japan, has developed an electret and electrostatic induction conversion device. The patent...
Wipo Publishes Patent of Asahi Glass, Fumiko Nakayama and Kimiaki Kashiwagi for "Electret and Method for Manufacturing Same and Electrostatic Induction Type Conversion Element" (Japanese Inventors)
Feb 08, 2013; GENEVA, Feb. 8 -- Publication No. WO/2013/015385 was published on Jan. 31.Title of the invention: "ELECTRET AND METHOD FOR...