For example, in the PSTN one channel of a communications link is typically used for the sole purpose of carrying signaling for establishment and clear down of telephone calls. The remaining channels are used entirely for the transmission of voice data. In most cases, a single 64kbit/s channel is sufficient to handle the call setup and call clear-down traffic for numerous voice and data channels.
The logical alternative to CCS is Channel Associated Signaling (CAS), where each bearer channel has a signaling channel dedicated to it.
CCS offers the following advantages over CAS, in the context of the PSTN:
- Faster call setup.
- No falsing interference between signaling tones by network and speech frequencies.
- Greater trunking efficiency due to the quicker set up and clear down, thereby reducing traffic on the network.
- No security issues related to the use of in-band signaling with CAS.
- CCS allows the transfer of additional information along with the signaling traffic providing features such as caller ID.
The most common CCS signaling methods in use today are ISDN and SS7.
ISDN signalling is used primarily on trunks connecting end-user PBX systems to a central office. SS7 is primarily used within the PSTN. The two signaling methods are very similar since they share a common heritage and in some cases, the same signaling messages are transmitted in both ISDN and SS7.
CCS is distinct from in-band or out-of-band signalling, which are to the data band what CCS and CAS are to the channel.
Notes
References
- Ronayne, John P. (1986). Introduction to Digital Communications Switching. 1st edition, Indianapolis: Howard W. Sams & Co., Inc.
This article is licensed under the GNU Free Documentation License.
Last updated on Wednesday July 23, 2008 at 09:46:13 PDT (GMT -0700)
View this article at Wikipedia.org - Edit this article at Wikipedia.org - Donate to the Wikimedia Foundation
Copyright © 2008, Dictionary.com, LLC. All rights reserved.