Definitions

rfc 792

Internet Control Message Protocol

The Internet Control Message Protocol (ICMP) is one of the core protocols of the Internet Protocol Suite. It is chiefly used by networked computers' operating systems to send error messages—indicating, for instance, that a requested service is not available or that a host or router could not be reached.

ICMP relies on IP to perform its tasks, and it is an integral part of IP. It differs in purpose from transport protocols such as TCP and UDP in that it is typically not used to send and receive data between end systems. It is usually not used directly by user network applications, with some notable exceptions being the ping tool and traceroute.

Technical details

Internet Control Message Protocol is part of the Internet Protocol Suite as defined in RFC 792. ICMP messages are typically generated in response to errors in IP datagrams (as specified in RFC 1122) or for diagnostic or routing purposes.

The version of ICMP for Internet Protocol version 4 is also known as ICMPv4, as it is part of IPv4. IPv6 has an equivalent protocol, ICMPv6.

ICMP messages are constructed at the IP layer, usually from a normal IP datagram that has generated an ICMP response. IP encapsulates the appropriate ICMP message with a new IP header (to get the ICMP message back to the original sending host) and transmits the resulting datagram in the usual manner.

For example, every machine (such as an intermediate router) that forwards an IP datagram has to decrement the time to live (TTL) field of the IP header by one; if the TTL reaches 0, an ICMP Time to live exceeded in transit message is sent to the source of the datagram.

Each ICMP message is encapsulated directly within a single IP datagram, and thus, like UDP, ICMP is unreliable.

Although ICMP messages are contained within standard IP datagrams, ICMP messages are usually processed as a special case, distinguished from normal IP processing, rather than processed as a normal sub-protocol of IP. In many cases, it is necessary to inspect the contents of the ICMP message and deliver the appropriate error message to the application that generated the original IP packet, the one that prompted the sending of the ICMP message.

Many commonly-used network utilities are based on ICMP messages. The traceroute command is implemented by transmitting UDP datagrams with specially set IP TTL header fields, and looking for ICMP Time to live exceeded in transit (above) and "Destination unreachable" messages generated in response. The related ping utility is implemented using the ICMP "Echo request" and "Echo reply" messages.

ICMP segment structure

Header

The ICMP header starts after bit 160 of the IP header (unless IP options are used).

Bits 160-167 168-175 176-183 184-191
160 Type Code Checksum
192 ID Sequence

  • Type - ICMP type as specified below.
  • Code - further specification of the ICMP type; e.g. : an ICMP Destination Unreachable might have this field set to 1 through 15 each bearing different meaning.
  • Checksum - This field contains error checking data calculated from the ICMP header+data, with value 0 for this field.
  • ID - This field contains an ID value, should be returned in case of ECHO REPLY.
  • Sequence - This field contains a sequence value, should be returned in case of ECHO REPLY.

Padding data

After the ICMP header follows padding data (in octets):

  • The Linux "ping" utility pads ICMP to a total size of 64 in addition to the 8 octet header.
  • Windows "ping.exe" pads to a total size of 40 in addition to the 8 octet header.

List of permitted control messages (incomplete list)

Type Code Description
0 - Echo Reply 0 Echo reply (used to ping)
1 and 2 Reserved
3 - Destination Unreachable 0 Destination network unreachable
1 Destination host unreachable
2 Destination protocol unreachable
3 Destination port unreachable
4 Fragmentation required, and DF flag set
5 Source route failed
6 Destination network unknown
7 Destination host unknown
8 Source host isolated
9 Network administratively prohibited
10 Host administratively prohibited
11 Network unreachable for TOS
12 Host unreachable for TOS
13 Communication administratively prohibited
4 - Source Quench 0 Source quench (congestion control)
5 - Redirect Message 0 Redirect Datagram for the Network
1 Redirect Datagram for the Host
2 Redirect Datagram for the TOS & network
3 Redirect Datagram for the TOS & host
6 Alternate Host Address
7 Reserved
8 - Echo Request 0 Echo request
9 - Router Advertisement 0 Router Advertisement
10 - Router Solicitation 0 Router discovery/selection/solicitation
11 - Time Exceeded 0 TTL expired in transit
1 Fragment reassembly time exceeded
12 - Parameter Problem: Bad IP header 0 Pointer indicates the error
1 Missing a required option
2 Bad length
13 - Timestamp 0 Timestamp
14 - Timestamp Reply 0 Timestamp reply
15 - Information Request 0 Information Request
16 - Information Reply 0 Information Reply
17 - Address Mask Request 0 Address Mask Request
18 - Address Mask Reply 0 Address Mask Reply
19 Reserved for security
20 through 29 Reserved for robustness experiment
30 - Traceroute 0 Information Request
31 Datagram Conversion Error
32 Mobile Host Redirect
33 Where-Are-You (originally meant for IPv6)
34 Here-I-Am (originally meant for IPv6)
35 Mobile Registration Request
36 Mobile Registration Reply
37 Domain Name Request
38 Domain Name Reply
39 SKIP Algorithm Discovery Protocol, Simple Key-Management for Internet Protocol
40 Photuris, Security failures
41 ICMP for experimental mobility protocols such as Seamoby [RFC4065]
42 through 255 Reserved

(Sources: IANA ICMP Parameters and Computer Networking - A Top-Down Approach by Kurose and Ross)

See also

References

External links

Search another word or see rfc 792on Dictionary | Thesaurus |Spanish
Copyright © 2014 Dictionary.com, LLC. All rights reserved.
  • Please Login or Sign Up to use the Recent Searches feature
FAVORITES
RECENT

;