Oil shale

Oil shale

The fine-grained sedimentary rock known as oil shale contains significant amounts of kerogen (a solid mixture of organic chemical compounds), from which technology can extract liquid hydrocarbons. (Geologists may regard the name oil shale as a misnomer, since the rock does not necessarily consist of a shale and its kerogen differs from crude oil; it requires more processing than crude oil, which affects its economic viability as a crude-oil substitute and increases its environmental impact.) Deposits of oil shale are located around the world, including major deposits in the United States of America. Global deposits are estimated as equivalent to 2.8 trillion to 3.3 trillion barrels of recoverable oil.

The chemical process of pyrolysis can convert the kerogen in oil shale into synthetic crude oil. Heating oil shale to a sufficiently high temperature will drive off a vapor which processing can distill (retort) to yield a petroleum-like shale oil—a form of non-conventional oil—and combustible shale gas (the term shale gas can also refer to gas occurring naturally in shales). Industry can also burn oil shale directly as a low-grade fuel for power generation and heating purposes and can use it as a raw material in chemical and construction-materials processing.

Oil shale has gained attention as an energy resource as the price of conventional sources of petroleum has risen and as a way for some areas to secure independence from external suppliers of energy. At the same time, oil shale mining and processing involve a number of environmental issues, such as land use, waste disposal, water use, waste-water management, greenhouse-gas emissions and air pollution. Estonia and China have well-established oil shale industries, and Brazil, Germany, Israel and Russia also utilize oil shale.

Geology

Oil shale consists of organic-rich sedimentary rock: it belongs to the group of sapropel fuels. It differs from bitumen-impregnated rocks (tar sands and petroleum reservoir rocks), humic coals and carbonaceous shale. While tar sands originate from the biodegradation of oil, heat and pressure have not (yet) transformed the kerogen in oil shales into petroleum. Coal contains a higher percentage of organic matter than oil shale. In commercial grades of oil shale the ratio of organic matter to mineral matter lies approximately between 0.75:5 and 1.5:5. At the same time, the organic matter in oil shale has an atomic ratio of hydrogen to carbon (H/C) approximately 1.2 to 1.8 times lower than for crude oil and about 1.5 to 3 times higher than for coals.

Oil shale does not have a definite geological definition nor a specific chemical formula. Oil shales vary considerably in their mineral content, chemical composition, age, type of kerogen, and depositional history. Oil shale seams do not always have discrete boundaries and the carbonaceous content varies. Scottish oil shales frequently exhibit a change from no carbonaceous content through a range of carbonaceous content and back to non-carbonaceous shales. As a rule of thumb, the better the oil shale, the more chocolaty-brown the streak and the more woody the sound when struck by a hammer.

The organic components of oil shale derive from a variety of organisms, such as the remains of algae, spores, pollen, plant cuticles and corky fragments of herbaceous and woody plants, and cellular debris from other aquatic and land plants. Some deposits contain significant fossils; Germany's Messel Pit has the status of a Unesco World Heritage Site. The mineral matter in oil shale includes various fine-grained silicates and carbonates.

Geologists can classify oil shales on the basis of their composition as carbonate-rich shales, siliceous shales, or cannel shales. Another classification, known as the van Krevelen diagram, assigns kerogen types, depending on the hydrogen, carbon, and oxygen content of oil shales' original organic matter. The most commonly used classification of oil shales, developed between 1987 and 1991 by Adrian C. Hutton of the University of Wollongong, adapts petrographic terms from coal terminology. This classification designates oil shales as terrestrial, lacustrine (lake-bottom-deposited), or marine (ocean bottom-deposited), based on the environment where the initial biomass was deposited. Hutton's classification scheme has proven useful in estimating the yield and composition of the extracted oil.

Reserves

Analysts draw a distinction between oil shale resources and oil shale reserves. "Resources" may refer to all oil shale deposits, while "reserves", more narrowly defined, represent those deposits from which existing technologies can economically extract oil. Since extraction technologies develop continuously, planners can only estimate the amount of recoverable kerogen. Although oil shale resources occur in many countries, only 33 countries possess known deposits of possible economic value. Well-explored deposits, potentially classifiable as reserves, include the Green River deposits in the western United States, the Tertiary deposits in Queensland, Australia, deposits in Sweden and Estonia, the El-Lajjun deposit in Jordan, and deposits in France, Germany, Brazil, China, southern Mongolia and Russia. These deposits have given rise to expectations of yielding at least 40 liters of shale oil per tonne of shale, using the Fischer assay.

A 2005 estimate set the total world resources of oil shale at 411 gigatons — enough to yield 2.8 to of shale oil. This exceeds the world's proven conventional oil reserves, estimated at , as of 1 January 2007. The largest deposits in the world occur in the United States in the Green River basin, which covers portions of Colorado, Utah, and Wyoming; about 70% of this resource is located on federally owned or managed land. Deposits in the United States constitute 62% of world resources; together, the United States, Russia and Brazil account for 86% of the world's resources in terms of shale-oil content. These figures are considered tentative, as several deposits have not yet been explored or analyzed. Professor Alan R. Carroll of University of Wisconsin-Madison regards the Upper Permian lacustrine oil shale deposits of northwest China, absent from previous global oil shale assessments, as comparable in size to the Green River Formation.

History

Humans have used oil shale as a fuel since prehistoric times, since it generally burns without any processing. Britons of the Iron Age also used to polish it and form it into ornaments. Modern industrial oil shale mining began in 1837 in Autun, France, followed by exploitation in Scotland, Germany, and several other countries. Operations during the 19th century focused on the production of kerosene, lamp oil, and paraffin; these products helped supply the growing demand for lighting that arose during the Industrial Revolution. Fuel oil, lubricating oil and grease, and ammonium sulfate were also produced. The oil shale industry expanded immediately before World War I because of limited access to conventional petroleum resources and the mass production of automobiles and trucks, which accompanied an increase in gasoline consumption.

Although the Estonian and Chinese oil shale industries continued to grow after World War II, most other countries abandoned their projects due to high processing costs and the availability of cheaper petroleum. Following the 1973 oil crisis, world production of oil shale reached a peak of 46 million tonnes in 1980 before falling to about 16 million tonnes in 2000, due to competition from cheap conventional petroleum in the 1980s. On 2 May 1982, known as "Black Sunday", Exxon canceled its US$5 billion Colony Shale Oil Project near Parachute, Colorado because of low oil-prices and increased expenses, laying off more than 2,000 workers and leaving a trail of home-foreclosures and small-business bankruptcies. In 1986, President Ronald Reagan signed into law the Consolidated Omnibus Budget Reconciliation Act of 1985 which among other things abolished the United States' Synthetic Liquid Fuels Program.

The global oil shale industry began to revive at the beginning of the 2000s. In 2003, an oil shale development program restarted in the United States. Authorities introduced a commercial leasing program permitting the extraction of oil shale and tar-sand resources on federal lands in 2005, in accordance with the Energy Policy Act of 2005.

Industry

As of 2008, industry uses oil shale in Brazil, China, Estonia and to some extent in Germany, Israel, and Russia. Several additional countries started assessing their reserves or had built experimental production plants, while others had phased out their oil shale industry. Oil shale serves for oil production in Estonia, Brazil, and China; for power generation in Estonia, China, Israel, and Germany; for cement production in Estonia, Germany, and China; and for use in chemical industries in China, Estonia, and Russia. As of 2005, Estonia alone accounted for about 70% of the world's oil shale production.

Romania and Russia have in the past run power plants fired by oil shale, but have shut them down or switched to other fuel sources such as natural gas. Jordan and Egypt plan to construct power plants fired by oil shale, while Canada and Turkey plan to burn oil shale along with coal for power generation. Oil shale serves as the main fuel for power generation only in Estonia, where the oil shale-fired Narva Power Plants accounted for 95% of electrical generation in 2005.

Extraction and processing

Most exploitation of oil shale involves mining followed by shipping elsewhere, after which one can burn the shale directly to generate electricity, or undertake further processing. The most-often used methods of surface mining involve open pit mining and strip mining. These procedures remove most of the overlying material to expose the oil shale deposits, and are practical when the deposits are close to the surface. Underground mining of oil shale, which removes less of the overlying material, employs the room-and-pillar method.

The extraction of the useful components of oil shale usually takes place above ground (ex-situ processing), although several newer technologies perform this underground (on-site or in-situ processing). In either case, the chemical process of pyrolysis converts the kerogen in the shale to synthetic crude oil and shale gas. Most conversion technologies involve heating shale in the absence of oxygen to a temperature at which kerogen is decomposed (pyrolysed) into gas, condensable oil, and a solid residue; this usually takes place between and . The process of decomposition begins at relatively low temperatures but proceeds more rapidly and more completely at higher temperatures.

During the course of in-situ processing, the oil shale is heated underground. These technologies can potentially extract more oil from a given area of land than ex-situ processes, since they can access the material at greater depths than do surface mines. Several companies have patented methods for in-situ retorting. However, most of these methods remain in the experimental phase. The methods are usually classified as true in-situ processes (TIS) and modified in-situ processes (MIS). True in-situ processes do not involve mining the oil shale. Modified in-situ processes involve removing part of the oil shale and bringing it to the surface for modified in-situ retorting in order to create permeability for gas flow in a rubble chimney. Explosives rubblize the oil shale deposit.

Hundreds of patents for oil shale retorting technologies exist; however, only a few dozen have undergone testing. As of 2006, only four technologies were in commercial use: Kiviter, Galoter, Fushun, and Petrosix.

Applications and products

Industry can use oil shale as a fuel for thermal power plants, burning it (like coal) to drive steam turbines; some of these plants employ the resulting heat for district heating of homes and businesses. Sizable oil shale-fired power plants occur in Estonia, which has an installed capacity of 2,967 megawatts (MW), Israel (12.5 MW), China (12 MW), and Germany (9.9 MW).

In addition to its use as a fuel, oil shale may also serve in the production of specialty carbon fibers, adsorbent carbons, carbon black, phenols, resins, glues, tanning agents, mastic, road bitumen, cement, bricks, construction and decorative blocks, soil-additives, fertilizers, rock-wool insulation, glass, and pharmaceutical products. However, oil shale use for production of these items remains small or only in its experimental stages. Some oil shales yield sulfur, ammonia, alumina, soda ash, uranium, and nahcolite as shale-oil extraction byproducts. Between 1946 and 1952, a marine type of Dictyonema shale served for uranium production in Sillamäe, Estonia, and between 1950 and 1989 Sweden used alum shale for the same purposes. Oil shale has also served as a substitute for natural gas, but as of 2008, producing shale gas as a natural-gas substitute is not economically feasible.

The oil derived from oil shale does not directly substitute for crude oil in all applications. It may contain higher concentrations of olefins, oxygen, and nitrogen than conventional crude oil. Some shale oils may have higher sulfur or arsenic content. By comparison with West Texas Intermediate, the benchmark standard for crude oil in the futures contract market, the Green River shale oil sulfur content ranges from near 0% to 4.9% (in average 0.76%), where West Texas Intermediate's sulfur content has a maximum of 0.42%. The sulfur content in shale oil from Jordan's oil shales may rise even up to 9.5%. The arsenic content, for example, becomes an issue for Green River formation oil shale. The higher concentrations of these materials means that the oil must undergo considerable upgrading (hydrotreating) before serving as oil-refinery feedstock. Above-ground retorting processes tended to yield a lower API gravity shale oil than the in situ processes. Shale oil serves best for producing middle-distillates such as kerosene, jet fuel, and diesel fuel. Worldwide demand for these middle distillates, particularly for diesel fuels, has increased rapidly in 1990s—2000s. However, appropriate refining processes equivalent to hydrocracking can transform shale oil into a lighter range hydrocarbon (gasoline).

Economics

During the early 20th century, the crude-oil industry expanded. Since then, the various attempts to develop oil shale deposits have succeeded only when the cost of shale-oil production in a given region comes in below the price of crude oil or its other substitutes. According to a survey conducted by the RAND Corporation, the cost of producing a barrel of oil at a surface retorting complex in the United States (comprising a mine, retorting plant, upgrading plant, supporting utilities, and spent shale reclamation), would range between US$70–95 ($440–600/m3, adjusted to 2005 values). This estimate considers varying levels of kerogen quality and extraction efficiency. In order for the operation to be profitable, the price of crude oil would need to remain above these levels. The analysis also discusses the expectation that processing costs would drop after the complex was established. The hypothetical unit would see a cost reduction of 35–70% after its first were produced. Assuming an increase in output of during each year after the start of commercial production, the costs would then be expected to decline to $35–48 per barrel ($220–300/m3) within 12 years. After achieving the milestone of , its costs would decline further to $30–40 per barrel ($190–250/m3). A comparison of the proposed American oil shale industry to the Alberta tar-sands industry has been drawn (the latter enterprise generated over one million barrels of oil per day in late 2007), stating that "the first-generation facility is the hardest, both technically and economically".

Royal Dutch Shell has announced that its in situ extraction technology in Colorado could become competitive at prices over $30 per barrel ($190/m3), while other technologies at full-scale production assert profitability at oil prices even lower than $20 per barrel ($130/m3). To increase the efficiency of oil shale retorting, researchers have proposed and tested several co-pyrolysis processes.

In a 1972 publication by the journal Pétrole Informations (ISSN 0755-561X), shale oil production was unfavorably compared to the liquefaction of coal. The article stated that coal liquefaction was less expensive, generated more oil, and created fewer environmental impacts than oil shale extraction. It cited a conversion ration of of oil per one ton of coal, as against per one ton of shale oil.

A critical measure of the viability of oil shale as an energy source lies in the ratio of the energy produced by the shale to the energy used in its mining and processing, a ratio known as "Energy Returned on Energy Invested" (EROEI). A 1984 study estimated the EROEI of the various known oil shale deposits as varying between 0.7–13.3 although known oil shale extraction development projects assert an EROI between 3 to 10. Royal Dutch Shell has reported an EROEI of three to four on its in situ development, Mahogany Research Project. The water needed in the oil shale retorting process offers an additional economic consideration: this may pose a problem in areas with water scarcity.

Environmental considerations

Oil shale mining involves a number of environmental impacts, more pronounced in surface mining than in underground mining. They include acid drainage induced by the sudden rapid exposure and subsequent oxidation of formerly buried materials, the introduction of metals into surface-water and groundwater, increased erosion, sulfur-gas emissions, and air pollution caused by the production of particulates during processing, transport, and support activities. In 2002, about 97% of air pollution, 86% of total waste and 23% of water pollution in Estonia came from the power industry, which uses oil shale as the main resource for its power production.

Oil shale extraction can damage the biological and recreational value of land and the ecosystem in the mining area. Combustion and thermal processing generate waste material. In addition, the atmospheric emissions from oil shale processing and combustion include carbon dioxide, a greenhouse gas. Environmentalists oppose production and usage of oil shale, as it creates even more greenhouse gases than conventional fossil fuels. Section 526 of the Energy Independence And Security Act prohibits United States government agencies from buying oil produced by processes that produce more greenhouse gas emissions than would traditional petroleum. Experimental in situ conversion processes and carbon capture and storage technologies may reduce some of these concerns in the future, but at the same time they may cause other problems, including groundwater pollution.

Some commentators have expressed concerns over the oil shale industry's use of water. In 2002, the oil shale-fired power industry used 91% of the water consumed in Estonia. Depending on technology, above-ground retorting uses between one and five barrels of water per barrel of produced shale-oil. A 2007 programmatic environmental impact statement issued by the US Bureau of Land Management stated that surface mining and retort operations produce two to ten US gallons of wastewater per tonne of processed oil shale. In situ processing, according to one estimate, uses about one-tenth as much water.

Water concerns become particularly sensitive issues in arid regions, such as the western US and Israel's Negev Desert, where plans exist to expand the oil shale industry despite a water shortage.

Environmental activists, including members of Greenpeace, have organized strong protests against the oil shale industry. In one result, Queensland Energy Resources put the proposed Stuart Oil Shale Project in Australia on hold in 2004.

See also

  • Core Research Center – a facility of the United States Geological Survey, dedicated to preserving valuable rock-samples threatened with disposal or destruction, including oil shales
  • Kukersite – a well-analyzed marine oil shale found in the Baltic Sea basin
  • Mitigation of peak oil – discussion of attempts to delay and minimize the impact of "peak oil" (the point in time of maximum global petroleum production), including the development of non-conventional oil resources
  • Narva Power Plants – as of 2008 the world's largest complex fired by oil shale
  • Oil reserves – discussion of global crude-oil supplies
  • Tasmanite – a marine oil shale found in Tasmania
  • Torbanite – a lacustrine oil shale found in Scotland
  • World energy resources and consumption

References

External links

Search another word or see oil shaleon Dictionary | Thesaurus |Spanish
Copyright © 2014 Dictionary.com, LLC. All rights reserved.
  • Please Login or Sign Up to use the Recent Searches feature