The term is generally used only with manual or visual techniques such as the use of intersecting visual or radio position lines rather than the use of more automated and accurate electronic methods such as GPS. A visual fix can me made by using a any sighting device with a bearing indicator. Two or more objects of known position are sighted, and the bearings recorded. Bearing lines are then plotted on a chart through the locations of the sighted items. The intersection of these lines is then the current position of the vessel.
Usually, a fix is where two position lines intersect. If three position lines can be obtained, the resulting "cocked hat", where the 3 lines do not intersect at the same point, but create a triangle where the vessel is inside, gives the navigator an indication of the accuracy in the three separate position lines.
The most accurate fixes occur when the position lines are at right angles to each other.
Fixes are a necessary part of navigation by dead reckoning because dead reckoning relies on estimates of speed, course. The fix confirms the actual position during a journey. The fix itself can introduce inaccuracies if the reference point is not correctly identified or is inaccurately measured.