Kanda Shokai was established in 1948 and the Greco guitar brand name was started by Kanda Shokai in 1960 It was not until 1966/1967 that electric guitar production was begun in earnest with the introduction of Greco Telecaster like models. Kanda Shokai at first used the Greco brand name for the solid body models and used the Canda brand name for their Acoustic models which was based on the company name Kanda (Canda). Also in the mid/late 1960s, Kanda Shokai produced Greco branded guitars based on Hagström and EKO designs for Avnet/Goya in the USA and these guitars were made by the Teisco and FujiGen guitar factories and were very similar to the late 1960s Ibanez guitars based on Hagström and EKO designs.
In the early 1970s Kanda Shokai made Greco Gibson like models with bolt on necks which were very similar to the Ibanez Gibson like models at that time and most of these models had a Greco logo that looked more like "Gneco". By the mid/late 1970s most Greco Gibson like models were being made with set necks and open book Gibson headstock designs. Some other Greco Gibson like models from the 1970s had a different headstock design (more like a Guild headstock design) that had a Greco logo with equally sized letters.
Starting in late 1979 the Greco "Super Real Series" were introduced which were high standard replicas of Gibson and Fender models. In 1982 the Greco "Mint Collection" was introduced which continued the high standard of the "Super Real Series". In 1982 Kanda Shokai and Yamano Gakki become part of Fender Japan and Kanda Shokai stopped producing it's own Greco Fender replica models. Since the end of the Greco open book headstock Gibson replicas in the early 1990s, Kanda Shokai have produced various models using the Greco brand name such as the "Mirage Series" (similar to the Ibanez Iceman), various Gibson copies (not using the open book Gibson headstock design), Violin basses (VB), Zemaitis Guitars and various other models as well.
Greco has produced a lot of different models over the years and this is a listing of the most common models.Gibson like models
The Greco Fender replicas from the late 1970s and early 1980s are similar to the early Fender Japan guitars as Kanda Shokai own the Greco brand and are also a part of Fender Japan. The Greco Fender replicas made by Matsumoku have Matsumoku stamped on the neckplate and the other Greco Fender replicas were made by Fuji-Gen Gakki. Most of the Greco models included the original selling price in Japanese Yen 円 in the model number (EGF-1800 = 180000 Yen). The "Super Real Series" date from late 1979 to 1982 and the open O Greco logo "Mint Collection Series" date from 1982 to the early 1990s. The "Mint Collection Series" have an open O letter in their Greco logo (an O letter with the top part of the O letter removed) and the "Super Real Series" usually have a closed O letter in their Greco logo.
The Fuji-Gen Gakki guitar factory were the main maker of the Greco guitars in the 1970s and 1980s Fuji-Gen Gakki obtained a CNC router in mid 1981 for making guitar parts and also began to manufacture their own pickups starting in late 1981 The Fuji-Gen Gakki CNC router and Fuji-Gen Gakki made pickups were used for the "Super Real" and "Mint Collection" series starting from 1981 to the early 1990s. Up until 1981/1982, Nisshin Onpa (Maxon) made pickups were used in the Greco guitars including the "Super Real Series" and the guitars were made in a more luthier style with no CNC machines used. The Cor-Tek and Tokai guitar factories were also used to make some Greco models due to FujiGen not being able to make some lower priced Grecos in the late 1980s.
There were also some transitional Greco models from 1981/1982 that have a mixture of "Super Real Series" and "Mint Collection Series" features such as a "Super Real" model with an open O letter in the Greco logo instead of a closed O letter. The Super Real EGF (flametop) and EG series higher end models featured nitrocellulose lacquer finishes and fret edge binding and some of the Super Real lower end models also featured fret edge binding.
Medium tenon neck joints with dowel reinforcements were used up until 1981 and standard Gibson style long and medium tenon neck joints were used after 1981. The medium tenon neck joints with dowel reinforcements were very similar to the Gibson long tenon neck joints that were used in the early 1970s before Gibson switched to using a short tenon neck joint. Some Greco models featured chambered (not solid) body designs up to the early 1980s which weighed less than a regular solid body model and also had a slight semi acoustic quality. Some of the current Gibson models also use chambered bodies such as the Gibson Les Paul Supreme.
Some Greco Les Paul guitars up until 1982 had laminated pancake bodies and were based on the similar Gibson Les Paul laminated guitars from the 1970s. The lowest priced Greco Les Pauls sometimes had different woods to the regular Maple and Mahogany combination. Up to 1980 the lowest priced Greco Les Pauls such as the EG450 model have Birch bodies. The lowest priced Super Real and Super Power Les Pauls such as the EG450 and EG480 models from late 1979 to 1982 have Sycamore tops.
The EGF-1800 (flametop), EGF-1200 (flametop) and EG-1000C (custom) models from the 1980 and 1981 catalogues (as well as very early 1982 models) featured "Dry Z" pickups (PAF like pickups made by Nisshin Onpa (Maxon)). The type of pickups vary depending on the guitars original selling price and the Nisshin Onpa (Maxon) made "Dry Z" or Fuji-Gen Gakki made "Dry 82" pickups were reserved for the top end models. The lower end models such as the EG-500 mostly used 3 piece maple tops while the higher end models mostly used 2 piece maple tops. "Mint Collection" models with a K after the numeric price designation (e.g. PC-98K) came with factory installed Kahler tremolo (vibrato) bridges.
The "Mint Collection Series" features vary with price with some of the higher end models such as the EG58-120 model having most of the same features as the "Super Real" higher end models. Most of the "Mint Collection Series" had long tenon neck joints but some had medium long tenon neck joints. There were also some Greco "Super Sound", "Super Power" and "Rock Spirits" Gibson replica models made as well. The "Super Sound" models were mid priced models from the "Super Real" years (late 1979-1982) and the "Super Power" models were lower priced models from the "Super Real" years (late 1979-1982). The "Rock Spirits" models were lower priced models from between 1979 and the early 1990s
Greco Gibson replicas started using serial numbers around 1975 and pre 1975 models had a Greco logo that looked like "Gneco".
From the mid 1970s to the mid 1990s Greco models have mostly used 2 serial number formats for non Acoustic models.
The first format is MYYPPPP.
The second format is YPPPP.
Sometimes a month letter is used in a MYPPPP format.
Since the mid 1990s Greco models have used other serial number formats as well.
Most of the Greco open book headstock Gibson replicas were made by FujiGen Gakki. Some Greco open book headstock Gibson replicas starting from around 1988 had no serial numbers. The lower priced no serial number Greco Les Paul and SG models were made by Cor-Tek (Cort) and usually have Cor-Tek (Cort) potentiometers. The Cor-Tek made Greco guitars have square shaped, brick like nuts with no slope and also often have shielding paint in the pickup and control cavities. Other higher priced no serial Greco Les Paul and SG models were made by Tōkai and the Les Paul models have a EG-75 or EGC-75 model number stamped in the pickup cavity and sometimes have fret edge binding. The no serial Greco guitars made by Tokai have square shaped routing holes at the bottom of the pickup cavities whereas the no serial Greco guitars made by Cor-Tek (Cort) have thinner rectangle shaped routing holes at the bottom of the pickup cavities. Kanda Shokai stopped using the open book headstock design on Greco Gibson replica models around the early 1990s and then concentrated on their other model lines and Fender Japan. Atlansia have supplied body and neck parts for Greco models as well. Tokai currently make the Kanda Shokai Zemaitis and Talbo models.
1980 Greco Super Real models and pickups made by Nisshin Onpa (Maxon) sample.
Models and pickups.
1984 Greco Mint Collection models and pickups made by Fuji-Gen Gakki sample.
Models and pickups.
Greco and Ibanez Nisshin Onpa (Maxon) pickup serial number format consisting of 5 numbers up to and including 1977. Ibanez Super 70 pickups have the same serial number format.
Greco and Ibanez Nisshin Onpa (Maxon) pickup serial number format consisting of 6 numbers from 1977 to 1982.