gives fragrance to

Mass-to-charge ratio

The mass-to-charge ratio, is a physical quantity that is widely used in the electrodynamics of charged particles, e.g. in electron optics and ion optics. It appears in the scientific fields of lithography, electron microscopy, cathode ray tubes, accelerator physics, nuclear physics, auger spectroscopy, cosmology and mass spectrometry. The importance of the mass-to-charge ratio, according to classical electrodynamics, is that two particles with the same mass-to-charge ratio move in the same path in a vacuum when subjected to the same electric and magnetic fields.


When charged particles move in electric and magnetic fields the following two laws apply:

mathbf{F} = Q (mathbf{E} + mathbf{v} times mathbf{B}), (Lorentz force law)

mathbf{F}=mmathbf{a} (Newton's second law of motion)

where F is the force applied to the ion, m is the mass of the ion, a is the acceleration, Q is the ionic charge, E is the electric field, and v x B is the vector cross product of the ion velocity and the magnetic field.

Using Newton's third law of motion yields:

(m/Q)mathbf{a} = mathbf{E}+ mathbf{v} times mathbf{B}.

This differential equation is the classic equation of motion of a charged particle in vacuum. Together with the particle's initial conditions it determines the particle's motion in space and time. It immediately reveals that two particles with the same m/Q behave the same. This is why the mass-to-charge ratio is an important physical quantity in those scientific fields where charged particles interact with magnetic (B) or electric (E) fields.


There are non-classical effects that derive from quantum mechanics, such as the Stern–Gerlach effect that can diverge the path of ions of identical m/Q.

Symbols & Units

The official symbol for mass is m. The official symbol for electric charge is Q; however, q is also very common. Charge is a scalar property, meaning that it can be either positive (+ symbol) or negative (- symbol). Sometimes, however, the sign of the charge is indicated indirectly. Coulomb is the SI unit of charge; however, other units are not uncommon.

The SI unit of the physical quantity m/Q is kilograms per coulomb.

[m/Q] = kg/C

The units and notation above are used in the field of mass spectrometry, while the unitless m/z notation is used for the independent variable that the mass spectrometer measures. These notations are closely related through the unified atomic mass unit and the elementary charge. See Mass spectrum.


In the 19th century the mass-to-charge ratios of some ions were measured by electrochemical methods. In 1897 the mass-to-charge ratio m/e of the electron was first measured by J. J. Thomson. By doing this he showed that the electron, which was postulated earlier in order to explain electricity, was in fact a particle with a mass and a charge; and that its mass-to-charge ratio was much smaller than that of the hydrogen ion H+. In 1898 Wilhelm Wien separated ions (canal rays) according to their mass-to-charge ratio with an ion optical device with superimposed electric and magnetic fields (Wien filter). In 1901 Walter Kaufman measured the relativistic mass increase of fast electrons. In 1913 J. J. Thomson measured the mass-to-charge ratio of ions with an instrument he called a parabola spectrograph. Today, an instrument that measures the mass-to-charge ratio of charged particles is called a mass spectrometer.

Charge-to-mass ratio

The charge-to-mass ratio (Q/m) of an object is, as its name implies, the charge of an object divided by the mass of the same object. This quantity is generally useful only for objects that may be treated as particles. For extended objects, total charge, charge density, total mass, and mass density are often more useful.


In some experiments, the charge-to-mass ratio is the only quantity that can be measured directly. Often, the charge can be inferred from theoretical considerations, so that the charge-to-mass ratio provides a way to calculate the mass of a particle.

Often, the charge-to-mass ratio can be determined from observing the deflection of a charged particle in an external magnetic field. The cyclotron equation, combined with other information such as the kinetic energy of the particle, will give the charge-to-mass ratio. One application of this principle is the mass spectrometer. The same principle can be used to extract information in experiments involving the Wilson cloud chamber.

The ratio of electrostatic to gravitational forces between two particles will be proportional to the product of their charge-to-mass ratios. It turns out that gravitational forces are negligible on the subatomic level.

The electron

The electron charge-to-mass quotient, -e/m_{e}, is a quantity in experimental physics. It matters because the electron mass m_{e} is difficult to measure directly, and is instead derived from measurements of the fundamental charge e and e/m_{e}. It also has historical significance: Thomson's measurement of e/m_{e} convinced him that cathode rays were particles, which we know as electrons.

The 2006 CODATA recommended value is -e/m_{e}= -1.758 820 150(44) times 10^{11} {C / kg}. CODATA refers to this as the electron charge-to-mass quotient, but ratio is still commonly used.

The "q/m" of an electron was successfully calculated by J. J. Thomson in 1897 and more successfully by Dunnington's Method which involves the angular momentum and deflection due to a perpendicular magnetic field.

There are two other common ways of measuring the charge to mass ratio of an electron, apart from J.J Thompson and the Dunnington Method.

1. The Magnetron Method - Using a GRD7 Valve (Ferranti valve), electrons are expelled from a hot tungsten-wire filament towards an anode. The electron is then deflected using a solenoid. From the current in the solenoid and the current in the Ferranti Valve, e/m can be calculated

2. Fine Beam Tube Method - Electrons are accelerated from a cathode to a cap-shaped anode. The electron is then expelled into a helium-filled ray tube, producing a luminous circle. From the radius of this circle, e/m is calculated.

Zeeman Effect

The charge-to-mass ratio of an electron may also be measured with the Zeeman effect, which gives rise to energy splittings in the presence of a magnetic field B:

Delta E = frac{ehbar B}{2m}(m_{j,f}g_{J,f}-m_{j,i}g_{J,i})

Here m_{j} (final and initial) are quantum values ranging in integer steps from -j to j, with j as the eigenvalue of the operator vec{J} = vec{S} + vec{L}. (vec{S} is the spin operator with eigenvalue s and vec{L} the angular momentum operator with eigenvalue l.) g_J is the Landé-g factor, calculated as

g_J = 1 + frac{j(j+1) + s(s+1) - l(l+1)}{2j(j+1)}

The shift in energy is also given in terms of frequency nu and wavelength lambda as

Delta E = hDeltanu = hcDelta(frac{1}{lambda}) = hcfrac{Deltalambda}{lambda^2}
Measurements of the Zeeman effect commonly involve the use of a Fabry-Perot interferometer, with light from a source (placed in a magnetic field) being passed between two mirrors of the interferometer. If delta D is the change in mirror separation required to bring the m^{th}-order ring of wavelength lambda + Deltalambda into coincidence with that of wavelength lambda, and Delta D brings the (m+1)^{th} ring of wavelength lambda into coincidence with the m^{th}-order ring, then

Deltalambda = lambda^2frac{delta D}{2DDelta D}.

It follows then that

hcfrac{Deltalambda}{lambda^2} = hcfrac{delta D}{2DDelta D} = frac{ehbar B}{2m}(m_{j,f}g_{J,f}-m_{j,i}g_{J,i}).

Rearranging, it is possible to solve for the charge-to-mass ratio of an electron as

frac{e}{m} = frac{4 pi c}{B(m_{j,f}g_{J,f}-m_{j,i}g_{J,i})}frac{delta D}{DDelta D}.

See also

Further reading



  • NIST on units and manuscript check list
  • Physics Today's instructions on quantities and units
  • International Vocabulary of Basic Terms in Metrology (Second edition 1993: ISBN 92-67-01075-1); a guide with contributions of the following organizations: IUPAP, IUPAC, ISO, OIML, IEC, IFCC.
  • IUPAP Red Book SUNAMCO 87-1 "Symbols, Units, Nomenclature and Fundamental Constants in Physics" (does not have an online version).
  • Symbols Units and Nomenclature in Physics IUPAP-25 IUPAP-25, E.R. Cohen & P. Giacomo, Physics 146A (1987) 1-68.
  • AIP style manual

Search another word or see gives fragrance toon Dictionary | Thesaurus |Spanish
Copyright © 2015, LLC. All rights reserved.
  • Please Login or Sign Up to use the Recent Searches feature