Daniel Drawbaugh received for an Earth battery for electric clocks (with several improvements in the art of Earth batteries). Another early patent was obtained by Emil Jahr Method of utilizing electrical Earth currents). In 1875, James C. Bryan received for his Earth Battery. In 1885, George Dieckmann, received US patent for his Electric Earth battery. In 1898, Nathan Stubblefield received for his electrolytic coil battery, which was a combination of an earth battery and a solenoid.(For more information see US patents 155209, 182802, 495582, 728381, 3278335, 3288648, 4153757 & 4457988) The Earth battery, in general, generated power for early telegraph transmissions and formed part of a tuned circuit that amplified the signalling voltage over long distances.
Metals and SoilsPotential Differences of metals
(Soil Galvanic series)
V Cu/CuSO4 electrode
|Steel (clean)||-0.50 to -0.80|
|Steel (rusted)||-0.20 to -0.50|
|Steel (mill scale)||-0.20|
|Cast iron (high silicon)||-0.20|
Ref.: Engineering Tutorials: Potential of Metals in Soils
It had been long known that continuous electric currents flowed through the solid and liquid portions of the Earth, and the collection of current from an electrically conductive medium in the absence of electrochemical changes (and in the absence of a thermoelectric junction) was established by Lord Kelvin. Lord Kelvin's "sea battery" was not a chemical battery. Lord Kelvin observed that such variables as placement of the electrodes in the magnetic field and the direction of the medium's flow affected the current output of his device. Such variables do not affect battery operation. When metal plates are immersed in a liquid medium, energy can be obtained and generated, including (but not limited to) methods known via magneto-hydrodynamic generators. In the various experiments by Lord Kelvin, metal plates were symmetrically perpendicular to the direction of the medium's flow and were carefully placed with respect to a magnetic field which differentially deflected electrons from the flowing stream. The electrodes can be asymmetrically oriented with respect to the source of energy, though.
To obtain the natural electricity, experimenters would thrust two metal plates into the ground at a certain distance from each other in the direction of a magnetic meridian, or astronomical meridian. The stronger currents flow from south to north. This phenomenon possesses a considerable uniformity of current strength and voltage. As the Earth currents flow from south to north, electrodes are positioned, beginning in the south and ending in the north, to increase the voltage at as large a distance as possible. In many early implementations, the cost was prohibitive because of an over-reliance on extreme spacing between electrodes.
It has been found that all the common metals behave relatively similarly. The two spaced electrodes, having a load in an external circuit connected between them, are disposed in an electrical medium, and energy is imparted to the medium in such manner that "free electrons" in the medium are excited. The free electrons then flow into one electrode to a greater degree than in the other electrode, thereby causing electric current to flow in the external circuit through the load. The current flows from that plate whose position in the electropotential series is near the negative end (such as palladium). The current produced is highest when the two metals are most widely separated from each other in the electropotential series, and when the material nearer the positive end is to the north, while that at the negative end is towards the south. The plates, one copper and another iron or carbon, are connected above ground by means of a wire with as little resistance as possible. In such an arrangement, the electrodes are not appreciably chemically corroded, even when they are in earth saturated with water, and are connected together by a wire for a long time.
It had been found that to strengthen the current, it was most advantageous to drive the northerly electropositive electrode deeper into the medium than the southerly electrode. The greatest currents and voltages were obtained when the difference in depth was such that a line joining the two electrodes was in the direction of the magnetic dip, or magnetic inclination. When the previous methods were combined, the current was tapped and utilized in any well-known manner.
In some cases, a pair of plates with differing electrical properties, and with suitable protective coatings, were buried below the ground. A protective or other coating covered each entire plate. A copper plate could be coated with powdered coke, a processed carbonaceous material. To a zinc plate, a layer of felt could be applied. To use the natural electricity, earth batteries fed electromagnets, the load, that were part of a motor mechanism.
KASE - Common Shares KZ1C41360013 (KZ1C00000942, TEMK) of Temirtau Electro-Metallurgy Plant (Kazakhstan) Admitted to KASE Official List's Third Category
Oct 31, 2013; /KASE, October 31, 13/ - Following a decision of Kazakhstan Stock Exchange (KASE) Listing Commission dated October 31, 2013...
KASE - Common Shares KZ1C41360013 (KZ1C00000942, TEMK) of Temirtau Electro-Metallurgy Plant (Kazakhstan) Admitted to KASE Official List Third Category
Nov 11, 2013; /KASE, November 11, 13/ - As previosukly informed, by Kazakhstan Stock Exchange (KASE) Listing Commission decision of October 31,...