Cyanuric acid or 1,3,5-triazine-2,4,6-triol is a chemical compound with the formula (CNOH)3. Like many industrially useful chemicals, this triazine has many synonyms. This white, odorless solid finds use as a precursor or a component of bleaches, disinfectants, and herbicides. In 1997, worldwide production was 160 million kilograms.
Cyanuric acid is the cyclic trimer of the elusive species cyanic acid, HOCN. The two structures shown in the infobox readily interconvert; that is, they are tautomers. The triol tautomer, which may have aromatic character, predominates in solution. The hydroxyl (-OH) groups assume phenolic character. Deprotonation with base affords a series of cyanurate salts:
Cyanuric acid (CYA) was first synthesized by Wöhler in 1829 by the thermal decomposition of urea and uric acid. The current industrial route to CYA entails the thermal decomposition of urea, with release of ammonia. The conversion commences at approximately 175 °C:
CYA crystallizes from water as the dihydrate.
Cyanuric acid can be produced by hydrolysis of crude or waste melamine followed by crystallization. Acid waste streams from plants producing these materials contain cyanuric acid and on occasion, dissolved amino-substituted triazines, namely, ammeline, ammelide, and melamine. In one method, an ammonium sulfate solution is heated to the "boil" and treated with a stoichiometric amount of melamine, by which means the cyanuric acid present precipitates as melamine-cyanuric acid complex. The various waste streams containing cyanuric acid and amino-substituted triazines may be combined for disposal and during upset conditions, undissolved cyanuric acid may be present in the waste streams.
One impurity in the production of CYA is ammelide, especially as the reaction temperature exceeds 190 °C: 3 H2N-CO-NH-CO-NH2 → [C(O)]2(CNH2)(NH)2N + 2 NH3 + H2O The first appearance of ammelamide occurs prior to 225 °C and is suspected also to occur from decomposition of biuret but is produced at a slower rate than that of CYA.
Melamine, [C(NH2)N]3, formation occurs between 325 and 350 °C and only in very small quantities.
Cyanuric acid is mainly used as a precursor to N-chlorinated cyanurates, which are used to disinfect water. The dichloro derivative is prepared by direct chlorination:
This species is typically converted to its sodium salt, sodium dichloro-s-triazinetrione. Further chlorination gives trichloroisocyanuric acid, [C(O)NCl]3. These N-chloro compounds serve as disinfectants and algicides for swimming pool water.
Because of their trifunctionality, CYA is a precursor to crosslinking agents, especially for polyurethane resins.
Testing for cyanuric acid concentration is commonly done with a turbidometric test, which uses a reagent, melamine, to precipitate the cyanuric acid. The relative turbidity of the reacted sample quantifies the CYA concentration. Referenced in 1957. This test works because melamine combines with the cyanuric acid in the water to form a fine, insoluble, white precipitate that causes the water to cloud in proportion to the amount of cyanuric acid in it.
FDA permits a certain amount of cyanuric acid to be present in some non-protein nitrogen (NPN) additives used in animal feed and drinking water. Cyanuric acid has been used as NPN. For example, Archer Daniels Midland manufactures an NPN supplement for cattle, which contains biuret, triuret, cyanuric acid and urea.
Cyanuric acid is classified as "essentially nontoxic." The 50% oral median lethal dose (LD50) is 7700 mg/kg in rats.
However, when cyanuric acid is administered together with melamine (which by itself is another low-toxicity substance), they may form extremely insoluble crystals, leading to formation of kidney stones and potentially causing kidney failure and death -- as evidenced in dogs and cats during the 2007 pet food contamination and in children during the 2008 Chinese milk scandal cases.
Wipo Publishes Patent of Mitsubishi Gas Chemical, Yuuichi Sugano, Masayuki Katagiri, Seiji Kita, Daisuke Ohno and Masanobu Sogame for "Novel Cyanic Acid Ester Compound, Method for Producing Same, Curable Resin Composition Containing Novel Cyanic Acid Ester Compound and Cured Product of Curable Resin Composition" (Japanese Inventors)
Feb 18, 2013; GENEVA, Feb. 18 -- Publication No. WO/2013/021869 was published on Feb. 14.Title of the invention: "NOVEL CYANIC ACID ESTER...
WIPO ASSIGNS PATENT TO MITSUBISHI GAS CHEMICAL FOR "METHOD OF STORING RESIN SOLUTION AND PROCESSES FOR PRODUCING PREPREG AND LAMINATE" (JAPANESE INVENTORS)
Sep 30, 2010; GENEVA, Oct. 5 -- Publication No. WO/2010/109861 was published on Sept. 30. Title of the invention: "METHOD OF STORING RESIN...
Wipo Publishes Patent of Mitsubishi Gas Chemical for "Resin Composition for Printed Wiring Board Material and Prepreg, Resin Sheet, Metal Foil-Clad Laminate and Printed Wiring Board Using Same" (Japanese Inventors)
Aug 15, 2013; GENEVA, Aug. 15 -- Publication No. WO/2013/115069 was published on Aug. 8.Title of the invention: "RESIN COMPOSITION FOR PRINTED...