Opening in the wall of a building for light and air, and sometimes for framing a view. Since early times, the openings have been filled with stone, wooden, or iron grilles, with panes of glass or other translucent material such as mica or, in East Asia, paper. A window in a vertically sliding frame is called a sash window: a single-hung sash has only one half that moves; in a double-hung sash, both parts slide. A casement window swings open on hinges attached to the upright side of the frame. Awning windows swing outward on hinges attached to the top of the frame; hopper windows swing inward on hinges attached to the bottom of the frame. Large, fixed (nonoperating) areas of glass are commonly called picture windows. A bay window (see oriel) is an exterior projection of a bay of a building that also forms an interior recess, providing better light and view than would a window flush with the building line. Seealso Diocletian window; rose window; shōji.
Learn more about window with a free trial on Britannica.com.
In Gothic architecture, a decorated circular window, often glazed with stained glass, that first appeared in mid-12th-century cathedrals. It was used mainly at the western end of the nave and the ends of the transept. The bar tracery of a High Gothic rose window consisted of a series of radiating forms, each tipped by a pointed arch at the outside of the circle. The rose windows of Notre-Dame de Paris are particularly noteworthy. In later Flamboyant-style tracery, the radiating elements consisted of an intricate network of wavy, double-curved bars.
Learn more about rose window with a free trial on Britannica.com.
Bay window in an upper story, supported from below by projecting corbels. Usually semihexagonal or rectangular in plan, oriels first became prevalent early in the 15th century. They were often placed over gateways or entrances to manor houses and public buildings of the late Gothic and Tudor periods. In cities of North Africa and the Middle East, the moucharaby is an oriel that uses grills or lattices in place of glass and shutters. Seealso brise-soleil.
Learn more about oriel with a free trial on Britannica.com.
A window is an opening in an otherwise solid and opaque surface that allows the passage of light and, if not closed or sealed, air and sound. Windows are usually glazed or covered in some other transparent or translucent material. Windows are held in place by frames, which prevent them from collapsing in.
Window is first recorded in the early 13th century, and originally referred to an unglazed hole in a roof. Window replaced the Old English ‘eagþyrl’, which literally means ‘eye-hole,’ and ‘eagduru’ ‘eye-door’. Many Germanic languages however adopted the Latin word ‘fenestra’ to describe a window with glass, such as standard Swedish ‘fönster’, or German ‘Fenster’. The use of window in English is probably due to the Scandinavian influence on the English language by means of loanwords during the Viking Age. In English the word fenester was used as a parallel until the mid-1700s and fenestration is still used to describe the arrangement of windows within a façade.
Styles available include:
A top hung hinged sash is also called an awning window.
A window composed of pieces of colored glass, transparent or opaque, frequently portraying persons or scenes. Typically the glass in these windows is separated by lead glazing bars. Stained glass windows were popular in Victorian houses and some Wrightian houses, and are especially common in churches.
Etymologically speaking, any window can be called a "light". However, within the window industry, particularly in insulated glass production, the term "lite" (so-spelled to keep the meaning differentiated from actual sunlight) is used to mean a single glass pane, several of which may be used to construct the final window product. For example, a sash unit, consisting of at least one sliding glass component, is typically composed of two lites, while a fixed window is composed of one lite. The terms "single-light", "double-light" etc refer to the number of these glass panes in a window.
The lights in a window sash are divided horizontally and vertically by narrow strips of wood or metal called muntins. More substantial load bearing or structural vertical dividers are called mullions, with the corresponding horizontal dividers referred to as transoms.
In the USA, the term replacement window means a framed window designed to slip inside the original window frame from the inside after the old sashes are removed. In Europe, however, it usually means a complete window including a replacement outer frame.
The USA term new construction window means a window with a nailing fin designed to be inserted into a rough opening from the outside before applying siding and inside trim. A nailing fin is a projection on the outer frame of the window in the same plane as the glazing, which overlaps the prepared opening, and can thus be 'nailed' into place).
In the UK and Europe, windows in new-build houses are usually fixed with long screws into expanding plastic plugs in the brickwork. A gap of up to 13mm is left around all four sides, and filled with expanding polyurethane foam. This makes the window fixing weatherproof but allows for expansion due to heat.
Windows can be a significant source of heat transfer. Different kinds of glazing and window frames can reduce thermal losses and gains.
Frames and sashes are traditionally made of wood, but metal, vinyl or PVC, and composites are also common. Their cost and availability may vary from country to country. Solid metal frames and sashes are poor insulators because metals conduct heat quickly. Vinyl frames are popular in Europe because they conduct heat poorly. However, vinyl frames are not as strong as metal, wood or composite window frames. Because of this lack of strength some vinyl frames are reinforced with metal, however, this will reduce the thermal efficiency of a vinyl window frame. Wood is also a good insulator. Composite frames may combine materials to obtain aesthetics of one material with the functional benefits of another. Modern metal window parts typically consist of two surfaces separated by insulating spacer material.
Many windows have movable window coverings such as blinds or curtains to keep out light, provide additional insulation, or ensure privacy.
Air infiltration and hence convective heat losses can be reduce by good window seals and attention to construction. Evacuated or argon-filled Insulated glazing units are also dependent on meticulous frame construction to prevent entry of air and loss of efficiency.
Modern windows are usually glazed with one large sheet of glass per sash, while windows in the past were glazed with multiple panes separated by "glazing bars", or "muntins", due to the unavailability of large sheets of glass. Today, glazing bars tend to be decorative, separating windows into small panes of glass even though larger panes of glass are available, generally in a pattern dictated by the architectural style at use. Glazing bars are typically wooden, but occasionally lead glazing bars soldered in place are used for more intricate glazing patterns.
A beam over the top of a window is known as the lintel or transom.
Historically, windows are designed with surfaces parallel to vertical building walls. Such a design allows considerable solar light and heat penetration due to the most commonly occurring incidence of sun angles. In passive solar building design, an extended eave is typically used to control the amount of solar light and heat entering the window(s).
An alternate method would be to calculate a more optimum angle for mounting windows which accounts for summer sun load minimization, with consideration of the actual latitude of the particular building. An example where this process has been implemented is the Dakin Building, Brisbane, California; much of the fenestration has been designed to reflect summer heat load and assist in preventing summer interior over-illumination and glare, by designing window canting to achieve a near 45 degree angle.
The symbolism of windows plays a part in the customs and traditions of certain religions.