The operation of a clock depends on a stable mechanical oscillator, such as a swinging pendulum or a mass connected to a spring, by means of which the energy stored in a raised weight or coiled spring advances a pointer or other indicating device at a controlled rate. It is not definitely known when the first mechanical clocks were invented. Some authorities attribute the first weight-driven clock to Pacificus, archdeacon of Verona in the 9th cent. Gerbert, a learned monk who became Pope Sylvester II, is often credited with the invention of a mechanical clock, c.996.
Mechanical figures that struck a bell on the hour were installed in St. Paul's Cathedral, London, in 1286; a dial was added to the clock in the 14th cent. Clocks were placed in a clock tower at Westminster Hall, London, in 1288 and in the cathedral at Canterbury in 1292. In France, Rouen was especially noted for the skill of its clockmakers and watchmakers. Probably the early clock closest to the modern ones was that constructed in the 14th cent. for the tower of the palace (later the Palais de Justice) of Charles V of France by the clockmaker Henry de Vick (Vic, Wieck, Wyck) of Württemburg. Until the 17th cent. few mechanical clocks were found outside cathedral towers, monasteries, abbeys, and public squares.
The early clocks driven by hanging weights were bulky and heavy. When the coiled spring came into use (c.1500), it made possible the construction of the smaller and lighter-weight types. By applying Galileo's law of the pendulum, the Dutch scientist Christiaan Huygens invented (1656 or 1657) a pendulum clock, probably the first. Early clocks used in dwellings in the 17th cent. were variously known as lantern clocks, birdcage clocks, and sheep's-head clocks; they were of brass, sometimes ornate, with a gong bell at the top supported by a frame. Before the pendulum was introduced, they were spring-driven or weight-driven; those driven by weights had to be placed on a wall bracket to allow space for the falling weights. These clocks, probably obtained chiefly from England and Holland, were used in the Virginia and New England colonies.
Clocks with long cases to conceal the long pendulums and weights came into use after the mid-17th cent.; these were the forerunners of the grandfather clocks. With the development of the craft of cabinetmaking, more attention was concentrated on the clock case. In France the tall cabinet clocks, or grandfather clocks, were often of oak elaborately ornamented with brass and gilt. Those made in England were at first of oak and later of walnut and mahogany; simpler in style, their chief decoration was inlay work.
Electric clocks were made in the second half of the 19th cent. but were not used extensively in homes until after c.1930. In an analog clock the hands of an electric clock are driven by a synchronous electric motor supplied with alternating current of a stable frequency. Digital clocks use LCDs (liquid crystal displays) or LEDs (light emitting diodes) to form the numbers indicating the time. The quartz clock, invented c.1929, uses the vibrations of a quartz crystal to drive a synchronous motor at a very precise rate. Some quartz clocks have an error of less than one thousandth of a second per day. The atomic clock, which is based upon the frequency of an atomic or molecular process, is even more precise; a state of the art atomic clock, such as the NIST-F1 (which is the U.S. time frequency standard clock), neither gains nor loses a second in 20 million years.
One of the most famous clocks is in the cathedral of Strasbourg; the clock was first placed in the cathedral in 1352, and in the 16th cent. it was reconstructed. In the 19th cent. a new astronomical clock (so called because it shows the current positions of the sun, moon, and other heavenly bodies in addition to the time of day) similar to the original clock was constructed; its elaborate mechanical devices include the Twelve Apostles, a crowing cock, a revolving celestial globe, and an automatic calendar dial. Among other well-known clocks of the world are the clock known as Big Ben in the tower next to Westminster Bridge in the British Houses of Parliament and the tower clock in the Metropolitan Life Insurance Company building, New York City.
See F. J. Britten, Old Clocks and Watches and Their Makers (1976); D. S. Landes, Revolution in Time: Clocks and the Making of the Modern World (1985); J. E. Barnett, Time's Pendulum: The Quest to Capture Time from Sundials to Atomic Clocks (1998); E. Bruton, Collector's Dictionary of Clocks and Watches (1999); J. Jesperson and J. Fitz-Randolph, From Sundials to Atomic Clocks: Understanding Time and Frequency (2d ed. 1999).
Ancient device for measuring time by the gradual flow of water. One form, used by North American Indians and some African peoples, consisted of a small boat or floating vessel that shipped water through a hole until it sank. In another form, water escaped through a hole in a vessel marked with graduated lines; specimens from Egypt date from the 14th century BC. The Romans invented a clepsydra consisting of a cylinder into which water dripped from a reservoir; a float provided readings against a scale on the cylinder wall. Galileo used a mercury clepsydra to time his experimental falling bodies. Seealso clock.
Learn more about water clock with a free trial on Britannica.com.
A classic pendulum clock. The power to run the clock comes from a slowly falling weight (other elipsis
Learn more about clock with a free trial on Britannica.com.
A clock is an instrument used for indicating and maintaining the time and passage thereof. The word clock is derived ultimately (via Dutch, Northern French, and Medieval Latin) from the Celtic words clagan and clocca meaning "bell". For horologists and other specialists the term clock continues to mean exclusively a device with a striking mechanism for announcing intervals of time acoustically, by ringing a bell, a set of chimes, or a gong. A silent instrument lacking such a mechanism has traditionally been known as a timepiece. In general usage today, however, a "clock" refers to any device for measuring and displaying the time which, unlike a watch, is not worn on the person.
The clock is one of the oldest human inventions, meeting the need to consistently measure intervals of time shorter than the natural units, the day, the lunar month, and the year. Such measurement requires devices. Devices operating on several different physical processes have been used over the millennia, culminating in the clocks of today.
Candle clocks and sticks of incense that burn down at approximately predictable speeds have also been used to estimate the passing of time. In an hourglass, fine sand pours through a tiny hole at a constant rate and indicates a predetermined passage of an arbitrary period of time.
Water clocks, also known as clepsydrae (sg: clepsydra), along with the sundials, are possibly the oldest time-measuring instruments, with the only exceptions being the vertical gnomon and the day-counting tally stick. Given their great antiquity, where and when they first existed are not known and perhaps unknowable. The bowl-shaped outflow is the simplest form of a water clock and is known to have existed in Babylon and in Egypt around the 16th century BC. Other regions of the world, including India and China, also have early evidence of water clocks, but the earliest dates are less certain. Some authors, however, write about water clocks appearing as early as 4000 BC in these regions of the world.
The Greek and Roman civilizations are credited for initially advancing water clock design to include complex gearing, which was connected to fanciful automata and also resulted in improved accuracy. These advances were passed on through Byzantium and Islamic times, eventually making their way to Europe. Independently, the Chinese developed their own advanced water clocks, passing their ideas on to Korea and Japan.
Some water clock designs were developed independently and some knowledge was transferred through the spread of trade. It is important to point out that the need for the common person to 'know what time it is' largely did not exist until the Industrial Revolution, when it became important to keep track of hours worked. In the earliest of times, however, the purpose for using a water clock was for astronomical and astrological reasons. These early water clocks were calibrated with a sundial. While never reaching the level of accuracy based on today's standards of timekeeping, the water clock was the most accurate and commonly used timekeeping device for millennia, until it was replaced by the more accurate pendulum clock in 17th century Europe.
None of the first clocks survived from 13th century Europe, but various mentions in church records reveal some of the early history of the clock.
Medieval religious institutions required clocks to measure and indicate the passing of time because, for many centuries, daily prayer and work schedules had to be strictly regulated. This was done by various types of time-telling and recording devices, such as water clocks, sundials and marked candles, probably used in combination. Important times and durations were broadcast by bells, rung either by hand or by some mechanical device such as a falling weight or rotating beater.
The word horologia (from the Greek ὡρα, hour, and λεγειν, to tell) was used to describe all these devices, but the use of this word (still used in several romance languages) for all timekeepers conceals from us the true nature of the mechanisms. For example, there is a record that in 1176 Sens Cathedral installed a ‘horologe’ but the mechanism used is unknown. According to Jocelin of Brakelond, in 1198 during a fire at the abbey of St Edmundsbury (now Bury St Edmunds), the monks 'ran to the clock' to fetch water, indicating that their water clock had a reservoir large enough to help extinguish the occasional fire .
These early clocks may not have used hands or dials, but “told” the time with audible signals.
Between 1280 and 1320, there is an increase in the number of references to clocks and horologes in church records, and this probably indicates that a new type of clock mechanism had been devised. Existing clock mechanisms that used water power were being adapted to take their driving power from falling weights. This power was controlled by some form of oscillating mechanism, probably derived from existing bell-ringing or alarm devices. This controlled release of power - the escapement - marks the beginning of the true mechanical clock. Outside of Europe, the escapement mechanism had been known and used in medieval China, as the Song Dynasty horologist and engineer Su Song (1020 - 1101) incorporated it into his astronomical clock-tower of Kaifeng in 1088. However, his astronomical clock and rotating armillary sphere still relied on the use of flowing water (ie. hydraulics), while European clockworks of the following centuries shed this old habit for a more efficient driving power of weights, in addition to the escapement mechanism.
The first mechanical clocks to be driven by weights and gears were invented by medieval Muslim engineers. The first geared mechanical clock was invented by the 11th-century Arab engineer Ibn Khalaf al-Muradi in Islamic Spain; the first weight-driven mechanical clocks, employing a mercury escapement mechanism and a clock face similar to an astrolabe dial, were also invented by Muslim engineers in the 11th century. A similar weight-driven mechanical clock later appeared in a Spanish language work compiled from earlier Arabic sources for Alfonso X in 1277. The knowledge of weight-driven mechanical clocks produced by Muslim engineers in Spain was transmitted to other parts of Europe through Latin translations of Arabic and Spanish texts on Muslim mechanical technology.
In the 13th century, clock construction and engineering entered a new phase with the advancements made by Al-Jazari, a Muslim engineer from Diyar-Bakr in South East Turkey, who is thought to be behind the birth to the concept of automatic machines. While working for Artuqid king of Diyar-Bakr, Nasir al-Din, al-Jazari made numerous clocks of all shapes and sizes. In 1206 he was ordered by the king to document his inventions leading to the publication of an outstanding book on engineering called "The Book of Knowledge of Ingenious Mechanical Devices” . This book became an invaluable resource for people of different engineering backgrounds as it described 50 mechanical devices in 6 categories, including water clocks. The most reputed clocks included the Elephant, the Castle and Scribe clocks, all of which were reconstructed by Muslim Heritage Consulting for Ibn Battuta Shopping Mall in Dubai (UAE), where they are fully functional. As well as telling the time, these grand clocks were symbols of status, grandeur and wealth of the Urtuq State.
These mechanical clocks were intended for two main purposes: for signalling and notification (e.g. the timing of services and public events), and for modeling the solar system. The former purpose is administrative, the latter arises naturally given the scholarly interest in astronomy, science, astrology, and how these subjects integrated with the religious philosophy of the time. The astrolabe was used both by astronomers and astrologers, and it was natural to apply a clockwork drive to the rotating plate to produce a working model of the solar system.
Simple clocks intended mainly for notification were installed in towers, and did not always require dials or hands. They would have announced the canonical hours or intervals between set times of prayer. Canonical hours varied in length as the times of sunrise and sunset shifted. The more sophisticated astronomical clocks would have had moving dials or hands, and would have shown the time in various time systems, including Italian hours, canonical hours, and time as measured by astronomers at the time. Both styles of clock started acquiring extravagant features such as automata.
In 1283, a large clock was installed at Dunstable Priory; its location above the rood screen suggests that it was not a water clock . In 1292, Canterbury Cathedral installed a 'great horloge'. Over the next 30 years there are brief mentions of clocks at a number of ecclesiastical institutions in England, Italy, and France. In 1322, a new clock was installed in Norwich, an expensive replacement for an earlier clock installed in 1273. This had a large (2 metre) astronomical dial with automata and bells. The costs of the installation included the full-time employment of two clockkeepers for two years .
Besides the Chinese astronomical clock of Su Song in 1088 mentioned above, in Europe there were the clocks constructed by Richard of Wallingford in St Albans by 1336, and by Giovanni de Dondi in Padua from 1348 to 1364. They no longer exist, but detailed descriptions of their design and construction survive, and modern reproductions have been made. They illustrate how quickly the theory of the mechanical clock had been translated into practical constructions, and also that one of the many impulses to their development had been the desire of astronomers to investigate celestial phenomena.
Wallingford's clock had a large astrolabe-type dial, showing the sun, the moon's age, phase, and node, a star map, and possibly the planets. In addition, it had a wheel of fortune and an indicator of the state of the tide at London Bridge. Bells rang every hour, the number of strokes indicating the time.
Dondi's clock was a seven-sided construction, 1 metre high, with dials showing the time of day, including minutes, the motions of all the known planets, an automatic calendar of fixed and movable feasts, and an eclipse prediction hand rotating once every 18 years.
It is not known how accurate or reliable these clocks would have been. They were probably adjusted manually every day to compensate for errors caused by wear and imprecise manufacture.
The Salisbury Cathedral clock, built in 1386, is considered to be the world's oldest surviving mechanical clock that strikes the hours.
Spring-driven clocks appeared during the 1400s, although they are often erroneously credited to Nürnberg watchmaker Peter Henlein (or Henle, or Hele) around 1511. The earliest existing spring driven clock is the chamber clock given to Peter the Good, Duke of Burgundy, around 1430, now in the Germanisches Nationalmuseum. Spring power presented clockmakers with a new problem; how to keep the clock movement running at a constant rate as the spring ran down. This resulted in the invention of the stackfreed and the fusee in the 1400s, and many other innovations, down to the invention of the modern going barrel in 1760.
The first record of a minute hand on a clock is 1475, in the Almanus Manuscript of Brother Paul .
During the 15th and 16th centuries, clockmaking flourished, particularly in the metalworking towns of Nuremberg and Augsburg, and in France, Blois. Some of the more basic table clocks have only one time-keeping hand, with the dial between the hour markers being divided into four equal parts making the clocks readable to the nearest 15 minutes. Other clocks were exhibitions of craftsmanship and skill, incorporating astronomical indicators and musical movements. The cross-beat escapement was developed in 1585 by Jost Burgi, who also developed the remontoire. Burgi's accurate clocks helped Tycho Brahe to observe astronomical events with much greater precision than before.
The first mechanical alarm clock was invented by the Ottoman engineer Taqi al-Din. He described the alarm clock in his book, The Brightest Stars for the Construction of Mechanical Clocks (Al-Kawākib al-durriyya fī wadh' al-bankāmat al-dawriyya), published in 1556-1559. His alarm clock was capable of sounding at a specified time, achieved by placing a peg on the dial wheel. At the requested time, the peg activated a ringing device. In the same treatise, he described a mechanical astronomical clock called the "observational clock", which was the first to measure time in minutes. He made use of his mathematical knowledge to design three dials which showed the hours, degrees and minutes. He later improved the design of his observational clock to measure time in seconds in an astronomical treatise written at his Istanbul observatory of al-Din (1577-1580). He described his observational clock as "a mechanical clock with three dials which show the hours, the minutes, and the seconds." This was an important innovation in 16th-century practical astronomy, as previous clocks were not accurate enough to be used for astronomical purposes. He further improved the observational clock, using only one dial to represent the hours, minutes and seconds, describing it as "a mechanical clock with a dial showing the hours, minutes and seconds and we divided every minute into five seconds.
Another early record of a second hand on a clock dates back to about 1560, on a clock now in the Fremersdorf collection. However, this clock could not have been accurate, and the second hand was probably for indicating that the clock was working.
The next development in accuracy occurred after 1657 with the invention of the pendulum clock. Galileo had the idea to use a swinging bob to regulate the motion of a time telling device earlier in the 17th century. Christiaan Huygens, however, is usually credited as the inventor. He determined the mathematical formula that related pendulum length to time (99.38 cm or 39.13 inches for the one second movement) and had the first pendulum-driven clock made. In 1670, the English clockmaker William Clement created the anchor escapement, an improvement over Huygens' crown escapement . Within just one generation, minute hands and then second hands were added.
A major stimulus to improving the accuracy and reliability of clocks was the importance of precise time-keeping for navigation. The position of a ship at sea could be determined with reasonable accuracy if a navigator could refer to a clock that lost or gained less than about 10 seconds per day. This clock could not contain a pendulum, which would be virtually useless on a rocking ship. Many European governments offered a large prize for anyone that could determine longitude accurately; for example, Great Britain offered 20,000 pounds, equivalent to millions of dollars today. The reward was eventually claimed in 1761 by John Harrison, who dedicated his life to improving the accuracy of his clocks. His H5 clock is reported to have lost less than 5 seconds over 10 days.
The excitement over the pendulum clock had attracted the attention of designers resulting in a proliferation of clock forms. Notably, the longcase clock (also known as the grandfather clock) was created to house the pendulum and works. The English clockmaker William Clement is also credited with developing this form in 1670 or 1671. It was also at this time that clock cases began to be made of wood and clock faces to utilize enamel as well as hand-painted ceramics.
Alexander Bain, Scottish clockmaker, patented the electric clock in 1840. The electric clock's mainspring is wound either with an electric motor or with an electro-magnet and armature. In 1841, he first patented the electromagnetic pendulum.
The development of electronics in the twentieth century led to clocks with no clockwork parts at all. Time in these cases is measured in several ways, such as by the vibration of a tuning fork, the behaviour of quartz crystals, the resonance of polycarbonates., or the quantum vibrations of atoms. Even mechanical clocks have since come to be largely powered by batteries, removing the need for winding.
Although the methods they use vary, all oscillating clocks, mechanical and digital and atomic, work similarly and can be divided into analogous parts. They consist of an object that repeats the same motion over and over again, an oscillator, with a precisely constant time interval between each repetition, or 'beat'. Attached to the oscillator is a controller device, which sustains the oscillator's motion by replacing the energy it loses to friction, and converts its oscillations into a series of pulses. The pulses are then added up in a chain of some type of counters to express the time in convenient units, usually seconds, minutes, hours, etc. Then finally some kind of indicator displays the result in a human-readable form.
Since clocks must run continuously, there is often a small secondary power source to keep the clock going temporarily during interruptions in the main power. In old mechanical clocks, a maintaining power spring provided force to turn the clock's wheels while the mainspring was being wound up. In quartz clocks a backup battery or capacitor is often included to keep the clock going if the power cord is unplugged.
The advantage of a harmonic oscillator over other forms of oscillator is that it employs resonance to vibrate at a precise natural resonant frequency or 'beat' dependent only on its physical characteristics, and resists vibrating at other rates. The possible precision achievable by a harmonic oscillator is measured by a parameter called its Q, or quality factor, which increases (other things being equal) with its resonant frequency. This is why there has been a long term trend toward higher frequency oscillators in clocks. Balance wheels and pendulums always include a means of adjusting the rate of the timepiece. Quartz timepieces sometimes include a rate screw that adjusts a capacitor for that purpose. Atomic clocks are primary standards, and their rate cannot be adjusted.
In mechanical clocks, the low Q of the balance wheel or pendulum oscillator made them very sensitive to the disturbing effect of the impulses of the escapement, so the escapement had a great effect on the accuracy of the clock, and many escapement designs were tried. The higher Q of resonators in electronic clocks makes them relatively insensitive to the disturbing effects of the drive power, so the driving oscillator circuit is a much less critical component.
Analog clocks usually indicate time using angles. The most common clock face uses a fixed numbered dial or dials and moving hand or hands. It usually has a circular scale of 12 hours, which can also serve as a scale of 60 minutes, and 60 seconds if the clock has a second hand. Many other styles and designs have been used throughout the years, including dials divided into 6, 8, 10, and 24 hours. The only other widely used clock face today is the 24 hour analog dial, because of the use of 24 hour time in military organizations and timetables. The 10-hour clock was briefly popular during the French Revolution, when the metric system was applied to time measurement, and an Italian 6 hour clock was developed in the 18th century, presumably to save power (a clock or watch chiming 24 times uses more power).
Another type of analog clock is the sundial, which tracks the sun continuously, registering the time by the shadow position of its gnomon. Sundials use some or part of the 24 hour analog dial. There also exist clocks which use a digital display despite having an analog mechanism—these are commonly referred to as flip clocks.
Alternative systems have been proposed. For example, the TWELV clock indicates the current hour using one of twelve colors, and indicates the minute by showing a proportion of a circular disk, similar to a moon phase.
Digital clocks display a numeric representation of time. Two numeric display formats are commonly used on digital clocks:
Most digital clocks use an LCD, LED, or VFD display; many other display technologies are used as well (cathode ray tubes, nixie tubes, etc.). After a reset, battery change or power failure, digital clocks without a backup battery or capacitor either start counting from 00:00, or stay at 00:00, often with blinking digits indicating that time needs to be set. Some newer clocks will actually reset themselves based on radio or Internet time servers that are tuned to national atomic clocks. Since the release of digital clocks in the mainstream, the use of analogue clocks has dropped dramatically.
The purpose of a clock is not always to display the time. It may also be used to control a device according to time, e.g. an alarm clock, a VCR, or a time bomb (see: counter). However, in this context, it is more appropriate to refer to it as a timer or trigger mechanism rather than strictly as a clock.
Computers depend on an accurate internal clock signal to allow synchronized processing. (A few research projects are developing CPUs based on asynchronous circuits.) Some computers also maintain time and date for all manner of operations whether these be for alarms, event initiation, or just to display the time of day. The internal computer clock is generally kept running by a small battery. Many computers will still function even if the internal clock battery is dead, but the computer clock will need to be reset each time the computer is restarted, since once power is lost, time is also lost.
This leads to the following definitions:
The recurrent, periodic process (e.g. a metronome) is an oscillator and typically generates a clock signal. Sometimes that signal alone is (confusingly) called "the clock", but sometimes "the clock" includes the counter, its indicator, and everything else supporting it.
This definition can be further improved by the consideration of successive levels of smaller and smaller error tolerances. While not all physical processes can be surveyed, the definition should be based on the set of physical processes which includes all individual physical processes which are proposed for consideration. Since atoms are so numerous and since, within current measurement tolerances they all beat in a manner such that if one is chosen as periodic then the others are all deemed to be periodic also, it follows that atomic clocks represent ideal clocks to within present measurement tolerances and in relation to all presently known physical processes. However, they are not so designated by fiat. Rather, they are designated as the current ideal clock because they are currently the best instantiation of the definition.