closing volume


[vol-yoom, -yuhm]
The volume of any solid, plasma, vacuum or theoretical object is how much three-dimensional space it occupies, often quantified numerically. One-dimensional figures (such as lines) and two-dimensional shapes (such as squares) are assigned zero volume in the three-dimensional space.Volume is presented as ml or cm3.

Volumes of straight-edged and circular shapes are calculated using arithmetic formulae. Volumes of other curved shapes are calculated using integral calculus, by approximating the given body with a large amount of small cubes or concentric cylindrical shells, and adding the individual volumes of those shapes. The volume of irregularly shaped objects can be determined by displacement. If an irregularly shaped object is less dense than the fluid, you will need a weight to attach to the floating object. A sufficient weight will cause the object to sink. The final volume of the unknown object can be found by subtracting the volume of the attached heavy object and the total fluid volume displaced.

In differential geometry, volume is expressed by means of the volume form, and is an important global Riemannian invariant.

Volume and capacity are sometimes distinguished, with capacity being used for how much a container can hold (with contents measured commonly in liters or its derived units), and volume being how much space an object displaces (commonly measured in cubic metrics or its derived units). The volume of a dispersed gas is the capacity of its container. If more gas is added to a closed container, the container either expands (as in a balloon) or the pressure inside the container increases.

Volume and capacity are also distinguished in a capacity management setting, where capacity is defined as volume over a specified time period.

Volume is a fundamental parameter in thermodynamics and it is conjugate to pressure.

Volume formulas

Common equations for volume:
Shape Equation Variables
A cube: s^3 s = length of any side
A rectangular prism: l cdot w cdot h l = length, w = width, h = height
A cylinder (circular prism): pi r^2 h r = radius of circular face, h = height
Any prism that has a constant cross sectional area along the height**: A cdot h A = area of the base, h = height
A sphere: frac{4}{3} pi r^3 r = radius of sphere
which is the integral of the Surface Area of a sphere
An ellipsoid: frac{4}{3} pi abc a, b, c = semi-axes of ellipsoid
A pyramid: frac{1}{3}Ah A = area of the base, h = height of pyramid
A cone (circular-based pyramid): frac{1}{3} pi r^2 h r = radius of circle at base, h = distance from base to tip
Any figure (calculus required) int A(h) ,dh h = any dimension of the figure, A(h) = area of the cross-sections perpendicular to h described as a function of the position along h. This will work for any figure if its cross-sectional area can be determined from h (no matter if the prism is slanted or the cross-sections change shape). ^*

(The units of volume depend on the units of length - if the lengths are in meters, the volume will be in cubic meters, etc)

The volume of a parallelepiped is the absolute value of the scalar triple product of the subtending vectors, or equivalently the absolute value of the determinant of the corresponding matrix.

The volume of any tetrahedron, given its vertices a, b, c and d, is (1/6)·|det(ab, bc, cd)|, or any other combination of pairs of vertices that form a simply connected graph.

Volume measures: cooking

Traditional cooking measures for volume also include:

  • teaspoon = 1/6 U.S. fluid ounce (about 4.929 mL)
  • teaspoon = 1/6 Imperial fluid ounce (about 4.736 mL)
  • teaspoon = 5 mL (metric)
  • tablespoon = ½ U.S. fluid ounce or 3 teaspoons (about 14.79 mL)
  • tablespoon = ½ Imperial fluid ounce or 3 teaspoons (about 14.21 mL)
  • tablespoon = 15 mL or 3 teaspoons (metric)
  • tablespoon = 5 fluidrams (about 17.76 mL) (British)
  • cup = 8 U.S. fluid ounces or ½ U.S. liquid pint (about 237 mL)
  • cup = 8 Imperial fluid ounces or ½ fluid pint (about 227 mL)
  • cup = 250 mL (metric)

Relationship to density

The density of an object is defined as mass per unit volume.

The term specific volume is used for volume divided by mass. This is the reciprocal of the mass density, expressed in units such as cubic meters per kilogram.(m³·kg-1).

Volume formula derivation

Shape Volume formula derivation
Sphere The volume of a sphere is the integral of infinitesimal circular slabs of width dx. The calculation for the volume of a sphere with center 0 and radius r is as follows.
The radius of the circular slabs is y = sqrt{r^2-x^2}
The surface of the circular slab is pi cdot y^2
The volume of the sphere can be calculated as int_{-r}^r pi(r^2-x^2) ,dx
Transform the variable of integration from x by r.x so that dx transforms to d(rx). Since (rx) should take the value +1 when x takes the value +r, the integral boundaries become -1 and +1, we get pi r^3 int_{-1}^1 (1-x^2) ,dx. (This substitution is difficult to
Thus, the sphere volume amounts to Vsphere = pi r^3 cdot[1-1/3-(-1+1/3)] = frac{4}{3}pi r^3

This formula can be derived more quickly using the formula for the sphere surface area, which is 4pi r^2. The volume of the sphere consists of layers of infinitesimal spherical slabs, and THE sphere volume is equal to

int_0^r 4pi r^2 ,dr = frac{4}{3}pi r^3

See also

External links

Search another word or see closing volumeon Dictionary | Thesaurus |Spanish
Copyright © 2015, LLC. All rights reserved.
  • Please Login or Sign Up to use the Recent Searches feature