There are several allotropes of carbon of which the best known are graphite, diamond, and amorphous carbon. The physical properties of carbon vary widely with the allotropic form. For example, diamond is highly transparent, while graphite is opaque and black. Diamond is among the hardest materials known, while graphite is soft enough to form a streak on paper. Diamond has a very low electric conductivity, while graphite is a very good conductor. Also, diamond has the highest thermal conductivity of all known materials under normal conditions. All the allotropic forms are solids under normal conditions but graphite is the most thermodynamically stable.
All forms of carbon are highly stable, requiring high temperature to react even with oxygen. The most common oxidation state of carbon in inorganic compounds is +4, while +2 is found in carbon monoxide and other transition metal carbonyl complexes. The largest sources of inorganic carbon are limestones, dolomites and carbon dioxide, but significant quantities occur in organic deposits of coal, peat, oil and methane clathrates. Carbon forms more compounds than any other element, with almost ten million pure organic compounds described to date, which in turn are a tiny fraction of such compounds that are theoretically possible under standard conditions.
Carbon is the fourth most abundant element in the universe by mass after hydrogen, helium, and oxygen. It is present in all known lifeforms, and in the human body, carbon is the second most abundant element by mass (about 18.5%) after oxygen. This abundance, together with the unique diversity of organic compounds and their unusual polymer-forming ability at the temperatures commonly encountered on Earth, make this element the chemical basis of all known life.
Carbon compounds form the basis of all life on Earth and the carbon-nitrogen cycle provides some of the energy produced by the Sun and other stars. Although it forms an extraordinary variety of compounds, most forms of carbon are comparatively unreactive under normal conditions. At standard temperature and pressure, it resists all but the strongest oxidizers. It does not react with sulfuric acid, hydrochloric acid, chlorine or any alkalis. At elevated temperatures carbon reacts with oxygen to form carbon oxides, and will reduce such metal oxides as iron oxide to the metal. This exothermic reaction is used in the iron and steel industry to control the carbon content of steel:
+ 4C(s) → 3Fe(s) + 4CO(g)
with sulfur to form carbon disulfide and with steam in the coal-gas reaction
C(s) + H2O(g) → CO(g) + H2(g).
Carbon combines with some metals at high temperatures to form metallic carbides, such as the iron carbide cementite in steel, and tungsten carbide, widely used as an abrasive and for making hard tips for cutting tools.
Graphene, which occurs naturally in graphite, is the strongest substance known to man, according to a study released in August 2008 by Columbia University. However, the process of separating it from graphite will require some technological development before it is economical enough to be used in industrial processes.
The system of carbon allotropes spans a range of extremes:
|Synthetic diamond nanorods are the hardest materials known.||Graphite is one of the softest materials known.|
|Diamond is the ultimate abrasive.||Graphite is a very good lubricant.|
|Diamond is an excellent electrical insulator.||Graphite is a conductor of electricity.|
|Diamond is the best known thermal conductor||Some forms of graphite are used for thermal insulation (i.e. firebreaks and heatshields)|
|Diamond is highly transparent.||Graphite is opaque.|
|Diamond crystallizes in the cubic system.||Graphite crystallizes in the hexagonal system.|
|Amorphous carbon is completely isotropic.||Carbon nanotubes are among the most anisotropic materials ever produced.|
Carbon is the fourth most abundant chemical element in the universe by mass after hydrogen, helium, and oxygen. Carbon is abundant in the Sun, stars, comets, and in the atmospheres of most planets. Some meteorites contain microscopic diamonds that were formed when the solar system was still a protoplanetary disk. Microscopic diamonds may also be formed by the intense pressure and high temperature at the sites of meteorite impacts.
In combination with oxygen in carbon dioxide, carbon is found in the Earth's atmosphere (in quantities of approximately 810 gigatonnes) and dissolved in all water bodies (approximately 36000 gigatonnes). Around 1900 gigatonnes are present in the biosphere. Hydrocarbons (such as coal, petroleum, and natural gas) contain carbon as well — coal "reserves" (not "resources") amount to around 900 gigatonnes, and oil reserves around 150 gigatonnes. With smaller amounts of calcium, magnesium, and iron, carbon is a major component of very large masses carbonate rock (limestone, dolomite, marble etc.).
Coal is a significant commercial source of mineral carbon; anthracite containing 92-98% carbon and the largest source (4000 Gt, or 80% of coal, gas and oil reserves) of carbon in a form suitable for use as fuel.
Natural diamonds occur in the rock kimberlite, found in ancient volcanic "necks," or "pipes". Most diamond deposits are in Africa, notably in South Africa, Namibia, Botswana, the Republic of the Congo, and Sierra Leone. There are also deposits in Arkansas, Canada, the Russian Arctic, Brazil and in Northern and Western Australia.
Diamonds are now also being recovered from the ocean floor off the Cape of Good Hope. However, though diamonds are found naturally, about 30% of all industrial diamonds used in the U.S. are now made synthetically.
According to studies from the Massachusetts Institute of Technology, an estimate of the global carbon budget is:
|Biosphere, oceans, atmosphere|
|0.45 x 1018 kilograms (3.7 x 1018 moles)|
|Organic carbon||13.2 x 1018 kg|
|Carbonates||62.4 x 1018 kg|
|1200 x 1018 kg|
Carbon-14 is formed in upper layers of the troposphere and the stratosphere, at altitudes of 9–15 km, by a reaction that is precipitated by cosmic rays. Thermal neutrons are produced that collide with the nuclei of nitrogen-14, forming carbon-14 and a proton.
Carbon-14 (14C) is a naturally occurring radioisotope which occurs in trace amounts on Earth of up to 1 part per trillion (0.0000000001%), mostly confined to the atmosphere and superficial deposits, particularly of peat and other organic materials. This isotope decays by 0.158 MeV β- emission. Because of its relatively short half-life of 5730 years, 14C is virtually absent in ancient rocks, but is created in the upper atmosphere (lower stratosphere and upper troposphere) by interaction of nitrogen with cosmic rays. The abundance of 14C in the atmosphere and in living organisms is almost constant, but decreases predictably in their bodies after death. This principle is used in radiocarbon dating, invented in 1949, which has been used extensively to determine the age of carbonaceous materials with ages up to about 40,000 years.
There are 15 known isotopes of carbon and the shortest-lived of these is 8C which decays through proton emission and alpha decay and has a half-life of 1.98739x10-21 s. The exotic 19C exhibits a nuclear halo, which means its radius is appreciably larger than would be expected if the nucleus was a sphere of constant density.
One of the fusion mechanisms powering stars is the carbon-nitrogen cycle.
Rotational transitions of various isotopic forms of carbon monoxide (e.g. 12CO, 13CO, and C18O) are detectable in the submillimeter regime, and are used in the study of newly forming stars in molecular clouds.
Commonly carbon-containing compounds which are associated with minerals or which do not contain hydrogen or fluorine, are treated separately from classical organic compounds; however the definition is not rigid (see reference articles above). Among these are the simple oxides of carbon. The most prominent oxide is carbon dioxide (). This was once the principal constituent of the paleoatmosphere, but is a minor component of the Earth's atmosphere today. Dissolved in water, it forms carbonic acid but as most compounds with multiple single-bonded oxygens on a single carbon it is unstable. Through this intermediate, though, resonance-stabilized carbonate ions are produced. Some important minerals are carbonates, notably calcite. Carbon disulfide is similar.
The other common oxide is carbon monoxide (CO). It is formed by incomplete combustion, and is a colorless, odorless gas. The molecules each contain a triple bond and are fairly polar, resulting in a tendency to bind permanently to hemoglobin molecules, displacing oxygen, which has a lower binding affinity. Cyanide (CN–), has a similar structure, but behaves much like a halide ion (pseudohalogen). For example it can form the nitride cyanogen molecule ((CN)2), similar to diatomic halides. Other uncommon oxides are carbon suboxide the unstable dicarbon monoxide (C2O), and even carbon trioxide (CO3).
With reactive metals, such as tungsten, carbon forms either carbides (C4–), or acetylides (C22–) to form alloys with high melting points. These anions are also associated with methane and acetylene, both very weak acids. With an electronegativity of 2.5, carbon prefers to form covalent bonds. A few carbides are covalent lattices, like carborundum (SiC), which resembles diamond.
The simplest form of an organic molecule is the hydrocarbon—a large family of organic molecules that are composed of hydrogen atoms bonded to a chain of carbon atoms. Chain length, side chains and functional groups all affect the properties of organic molecules. By IUPAC's definition, all the other organic compounds are functionalized compounds of hydrocarbons.
Carbon occurs in all organic life and is the basis of organic chemistry. When united with hydrogen, it forms various flammable compounds called hydrocarbons which are important to industry as chemical feedstock for the manufacture of plastics and petrochemicals and as fossil fuels.
When combined with oxygen and hydrogen, carbon can form many groups of important biological compounds including sugars,lignans, chitins, alcohols, fats, and aromatic esters, carotenoids and terpenes. With nitrogen it forms alkaloids, and with the addition of sulfur also it forms antibiotics, amino acids, and rubber products. With the addition of phosphorus to these other elements, it forms DNA and RNA, the chemical-code carriers of life, and adenosine triphosphate (ATP), the most important energy-transfer molecule in all living cells.
Carbon was discovered in prehistory and was known in the forms of soot and charcoal to the earliest human civilizations. Diamonds were known probably as early as 2500 BCE in China, while carbon in the forms of charcoal was made around Roman times by the same chemistry as it is today, by heating wood in a pyramid covered with clay to exclude air.
In 1722, René A. F. de Réaumur demonstrated that iron was transformed into steel through the absorption of some substance, now known to be carbon. In 1772, Antoine Lavoisier showed that diamonds are a form of carbon, when he burned samples of carbon and diamond then showed that neither produced any water and that both released the same amount of carbon dioxide per gram. Carl Wilhelm Scheele showed that graphite, which had been thought of as a form of lead, was instead a type of carbon. In 1786, the French scientists Claude Louis Berthollet, Gaspard Monge and C. A. Vandermonde then showed that this substance was carbon. In their publication they proposed the name carbone (Latin carbonum) for this element. Antoine Lavoisier listed carbon as an element in his 1789 textbook.
A new allotrope of carbon, fullerene, that was discovered in 1985 includes nanostructured forms such as buckyballs and nanotubes. Their discoverers received the Nobel Prize in Chemistry in 1996. The resulting renewed interest in new forms, lead to the discovery of further exotic allotropes, including glassy carbon, and the realization that "amorphous carbon" is not strictly amorphous.
According to the USGS, world production of natural graphite in 2006 was 1.03 million tonnes and in 2005 was 1.04 million tonnes (revised), of which the following major exporters produced: China produced 720,000 tonnes in both 2006 and 2005, Brazil 75,600 tonnes in 2006 and 75,515 tonnes in 2005 (revised), Canada 28,000 tonnes in both years, and Mexico (amorphous) 12,500 tonnes in 2006 and 12,357 tonnes in 2005 (revised). In addition, there are two specialist producers: Sri Lanka produced 3,200 tonnes in 2006 and 3,000 tonnes in 2005 of lump or vein graphite, and Madagascar produced 15,000 tonnes in both years, a large portion of it "crucible grade" or very large flake graphite. Some other producers produce very small amounts of "crucible grade".
According to the USGS, U.S. (synthetic) graphite electrode production in 2006 was 132,000 tonnes valued at $495 million and in 2005 was 146,000 tonnes valued at $391 million, and high-modulus graphite (carbon) fiber production in 2006 was 8,160 tonnes valued at $172 million and in 2005 was 7,020 tonnes valued at $134 million.
The diamond supply chain is controlled by a limited number of powerful businesses, and is also highly concentrated in a small number of locations around the world.
Only a very small fraction of the diamond ore consists of actual diamonds. The ore is crushed, during which care has to be taken in order to prevent larger diamonds from being destroyed in this process and subsequently the particles are sorted by density. Today, diamonds are located in the diamond-rich density fraction with the help of X-ray fluorescence, after which the final sorting steps are done by hand. Before the use of X-rays became commonplace, the separation was done with grease belts; diamonds have a stronger tendency to stick to grease than the other minerals in the ore.
Historically diamonds were known to be found only in alluvial deposits in southern India. India led the world in diamond production from the time of their discovery in approximately the 9th century BCE to the mid-18th century AD, but the commercial potential of these sources had been exhausted by the late 18th century and at that time India was eclipsed by Brazil where the first non-Indian diamonds were found in 1725.
Diamond production of primary deposits (kimberlites and lamproites) only started in the 1870s after the discovery of the Diamond fields in South Africa. Production has increased over time and now an accumulated total of 4.5 billion carats have been mined since that date. Interestingly 20% of that amount has been mined in the last 5 years alone and during the last ten years 9 new mines have started production while 4 more are waiting to be opened soon. Most of these mines are located in Canada, Zimbabwe, Angola, and one in Russia.
In the US, diamonds have been found in Arkansas, Colorado, and Montana. In 2004, a startling discovery of a microscopic diamond in the US led to the January 2008 bulk-sampling of kimberlite pipes in a remote part of Montana.
Today, most commercially viable diamond deposits are in Russia, Botswana, Australia and the Democratic Republic of Congo. In 2005, Russia produced almost one-fifth of the global diamond output, reports the British Geological Survey. Australia boasts the richest diamondiferous pipe with production reaching peak levels of per year in the 1990s.
There are also commercial deposits being actively mined in the Northwest Territories of Canada, Siberia (mostly in Yakutia territory, for example Mir pipe and Udachnaya pipe), Brazil, and in Northern and Western Australia. Diamond prospectors continue to search the globe for diamond-bearing kimberlite and lamproite pipes.
Carbon is essential to all known living systems, and without it life as we know it could not exist (see alternative biochemistry). The major economic use of carbon other than food and wood is in the form of hydrocarbons, most notably the fossil fuel methane gas and crude oil (petroleum). Crude oil is used by the petrochemical industry to produce, amongst others, gasoline and kerosene, through a distillation process, in refineries. Cellulose is a natural, carbon-containing polymer produced by plants in the form of cotton, linen, hemp. Cellulose is mainly used for maintaining structure in plants. Commercially valuable carbon polymers of animal origin include wool, cashmere and silk. Plastics are made from synthetic carbon polymers, often with oxygen and nitrogen atoms included at regular intervals in the main polymer chain. The raw materials for many of these synthetic substances come from crude oil.
The uses of carbon and its compounds are extremely varied. It can form alloys with iron, of which the most common is carbon steel. Graphite is combined with clays to form the 'lead' used in pencils used for writing and drawing. It is also used as a lubricant and a pigment, as a moulding material in glass manufacture, in electrodes for dry batteries and in electroplating and electroforming, in brushes for electric motors and as a neutron moderator in nuclear reactors.
Charcoal is used as a drawing material in artwork, for grilling, and in many other uses including iron smelting. Wood, coal and oil are used as fuel for production of energy and space heating. Gem quality diamond is used in jewelry, and Industrial diamonds are used in drilling, cutting and polishing tools for machining metals and stone. Plastics are made from fossil hydrocarbons, and carbon fibre, made by pyrolysis of synthetic polyester fibres is used to reinforce plastics to form advanced, lightweight composite materials. Carbon fiber is made by pyrolysis of extruded and stretched filaments of polyacrylonitrile (PAN) and other organic substances. The crystallographic structure and mechanical properties of the fiber depend on the type of starting material, and on the subsequent processing. Carbon fibres made from PAN have structure resembling narrow filaments of graphite, but thermal processing may re-order the structure into a continuous rolled sheet . The result is fibers with higher specific tensile strength than steel.
Carbon black is used as the black pigment in printing ink, artist's oil paint and water colours, carbon paper, automotive finishes, India ink and laser printer toner. Carbon black is also used as a filler in rubber products such as tyres and in plastic compounds. Activated charcoal is used as an absorbent and adsorbent in filter material in applications as diverse as gas masks, water purification and kitchen extractor hoods and in medicine to absorb toxins, poisons, or gases from the digestive system. Carbon is used in chemical reduction at high temperatures. coke is used to reduce iron ore into iron. Case hardening of steel is achieved by heating finished steel components in carbon powder. Carbides of silicon, tungsten, boron and titanium, are among the hardest known materials, and are used as abrasives in cutting and grinding tools. Carbon compounds make up most of the materials used in clothing, such as natural and synthetic textiles and leather, and almost all of the interior surfaces in the built environment other than glass, stone and metal.
A large trade in gem-grade diamonds exists. Unlike precious metals such as gold or platinum, gem diamonds do not trade as a commodity: there is a substantial mark-up in the sale of diamonds, and there is not a very active market for resale of diamonds. One hallmark of the trade in gem-quality diamonds is its remarkable concentration: wholesale trade and diamond cutting is limited to a few locations. 92% of diamond pieces cut in 2003 were in Surat, Gujarat, India. Other important centers of diamond cutting and trading are Antwerp, where the International Gemological Institute is based, London, New York, Tel Aviv, Amsterdam. A single company—De Beers—controls a significant proportion of the trade in diamonds. They are based in Johannesburg, South Africa and London, England.
The production and distribution of diamonds is largely consolidated in the hands of a few key players, and concentrated in traditional diamond trading centers. The most important being Antwerp, where 80% of all rough diamonds, 50% of all cut diamonds and more than 50% of all rough, cut and industrial diamonds combined are handled. This makes Antwerp the de facto 'world diamond capital'. New York, however, along with the rest of the United States, is where almost 80% of the world's diamonds are sold, including auction sales. Also, the largest and most unusually shaped rough diamonds end up in New York. The De Beers owns or controls a significant portion of the world's rough diamond production facilities (mines) and distribution channels for gem-quality diamonds. The company and its subsidiaries own mines that produce some 40 percent of annual world diamond production. At one time it was thought over 80 percent of the world's rough diamonds passed through the Diamond Trading Company (DTC, a subsidiary of De Beers) in London, but presently the figure is estimated at less than 50 percent. The De Beers diamond advertising campaign is acknowledged as one of the most successful and innovative campaigns in history. N. W. Ayer & Son, the advertising firm retained by De Beers in the mid-20th century, succeeded in reviving the American diamond market and opened up new markets, even in countries where no diamond tradition had existed before. N.W. Ayer's multifaceted marketing campaign included product placement, advertising the diamond itself rather than the De Beers brand, and building associations with celebrities and royalty. This coordinated campaign has lasted decades and continues today; it is perhaps best captured by the slogan "a diamond is forever".
The market for industrial-grade diamonds operates much differently from its gem-grade counterpart. Industrial diamonds are valued mostly for their hardness and heat conductivity, making many of the gemological characteristics of diamond, including clarity and color, mostly irrelevant. This helps explain why 80% of mined diamonds (equal to about 100 million carats or 20,000 kg annually), unsuitable for use as gemstones and known as bort, are destined for industrial use. In addition to mined diamonds, synthetic diamonds found industrial applications almost immediately after their invention in the 1950s; another 3 billion carats (600 metric tons) of synthetic diamond is produced annually for industrial use. The dominant industrial use of diamond is in cutting, drilling, grinding, and polishing. Most uses of diamonds in these technologies do not require large diamonds; in fact, most diamonds that are gem-quality except for their small size, can find an industrial use. Diamonds are embedded in drill tips or saw blades, or ground into a powder for use in grinding and polishing applications. Specialized applications include use in laboratories as containment for high pressure experiments (see diamond anvil cell), high-performance bearings, and limited use in specialized windows. With the continuing advances being made in the production of synthetic diamonds, future applications are beginning to become feasible. Garnering much excitement is the possible use of diamond as a semiconductor suitable to build microchips from, or the use of diamond as a heat sink in electronics.
Carbon may also burn vigorously and brightly in the presence of air at high temperatures, as in the Windscale fire, which was caused by sudden release of stored Wigner energy in the graphite core. Large accumulations of coal, which have remained inert for hundred of millions of years in the absence of oxygen, may spontaneously combust when exposed to air, for example in coal mine waste tips. The great variety of carbon compounds include such lethal poisons as tetrodotoxin, the lectin ricin from seeds of the castor oil plant Ricinus communis, cyanide (CN-) and carbon monoxide; and such essentials to life as glucose and protein.
Le charbon produit avec des bois importés aidera à résoudre le problème de la déforestation: Environ 10 000 tonnes par mois de cette matière première seront exportées vers Haïti
Apr 04, 2007; UNE SOURCE ALTERNATIVE DE COMBUSTIBLE ET LA PRODUCTION DU charbon DE BOIS PAR LA TECHNOLOGIE MODERNE Une compagnie...
Wipo Publishes Patent of Andre Borowski, Edoardo Charbon, Robert Staszewski, Priyanka Kumar and Technische Universiteit Delft for "3D Imager and Method for 3d Imaging" (Dutch Inventors)
Mar 15, 2013; GENEVA, March 15 -- Publication No. WO/2013/034771 was published on March 14.Title of the invention: "3D IMAGER AND METHOD FOR 3D...