Braille

Braille

[breyl]
Braille, Louis, 1809?-1852, French inventor of the Braille system of printing and writing for the blind. Having become blind from an accident at the age of 3, he was admitted at 10 to the Institution nationale des Jeunes Aveugles in Paris. Later he taught there. In order to make his instruction easier, he chose Charles Barbier's system of writing with points, evolving a much simpler one from that system. He was interested in music as well and for a time played the organ in a church in Paris. The Braille system consists of six raised points or dots used in 63 possible combinations. It is in use, in modified form, for printing, writing, and musical notation for the blind. See also blindness.
Braille, in astronomy, a small asteroid notable because it has the same atypical geologic composition as the larger asteroid Vesta. In 1999 the space probe Deep Space 1 passed within 16 mi (26 km) of Braille's surface, the closest flyby ever of an asteroid. Braille measures only 1.3 mi (2.1 km) by 0.6 mi (1 km). Its orbit is highly elliptical; its periapsis, or closest point to the sun, being midway between earth and Mars, and its apoapsis, or furthest point from the sun, is more than three times further from the sun than the earth is. In addition, much of Braille's orbit is a considerable distance above or below the ecliptic, the plane in which the planets circle the sun. Because of its orbit and geologic composition, it has been suggested that Braille was torn from Vesta, which has a huge crater, as the result of Vesta's collision with another celestial body.

Louis Braille, portrait bust by an unknown artist.

(born Jan. 4, 1809, Coupvray, near Paris, France—died Jan. 6, 1852, Paris) French educator who developed the Braille system of printing and writing for the blind. Himself blinded at the age of three in an accident, he went to Paris in 1819 to attend the National Institute for Blind Children, and from 1826 he taught there. Braille adapted a method created by Charles Barbier to develop his own simplified system.

Learn more about Braille, Louis with a free trial on Britannica.com.

Louis Braille, portrait bust by an unknown artist.

(born Jan. 4, 1809, Coupvray, near Paris, France—died Jan. 6, 1852, Paris) French educator who developed the Braille system of printing and writing for the blind. Himself blinded at the age of three in an accident, he went to Paris in 1819 to attend the National Institute for Blind Children, and from 1826 he taught there. Braille adapted a method created by Charles Barbier to develop his own simplified system.

Learn more about Braille, Louis with a free trial on Britannica.com.

The alphabet and the digits 0–9 in the modern Braille system. Each letter or digit consists elipsis

Universal system of writing and printing for the blind. The Frenchman Louis Braille invented the system in 1824. Characters embossed on paper are read by passing the fingers lightly over the manuscript. The system is based on a matrix of six dots arranged in two columns of three. The 63 combinations possible in this framework stand for letters, numbers, punctuation marks, and common words such as and and the. A Braille code for English was not adopted until 1932. Modifications also exist for other languages, for mathematical and technical material, and for musical notation. Braille may be handwritten—from right to left—using a stylus to press dots into a piece of paper between hinged metal plates; when the sheet is turned over, the dots face up and are read from left to right. Braille typewriters and electric embossing machines are also used.

Learn more about Braille with a free trial on Britannica.com.

The Braille system is a method that is widely used by blind people to read and write. Braille was devised in 1821 by Louis Braille, a Frenchman. Each Braille character or cell is made up of six dot positions, arranged in a rectangle containing two columns of three dots each. A dot may be raised at any of the six positions to form sixty-four (26) permutations, including the arrangement in which no dots are raised. For reference purposes, a particular permutation may be described by naming the positions where dots are raised, the positions being universally numbered 1 to 3, from top to bottom, on the left, and 4 to 6, from top to bottom, on the right. For example, dots 1-3-4 would describe a cell with three dots raised, at the top and bottom in the left column and on top of the right column, i.e., the letter m. The lines of horizontal Braille text are separated by a space, much like visible printed text, so that the dots of one line can be differentiated from the Braille text above and below. Punctuation is represented by its own unique set of characters.

The Braille system was based on a method of communication originally developed by Charles Barbier in response to Napoleon's demand for a code that soldiers could use to communicate silently and without light at night called night writing. Barbier's system was too complex for soldiers to learn, and was rejected by the military. In 1821 he visited the National Institute for the Blind in Paris, France, where he met Louis Braille. Braille identified the major failing of the code, which was that the human finger could not encompass the whole symbol without moving, and so could not move rapidly from one symbol to another. His modification was to use a 6 dot cell — the Braille system — which revolutionized written communication for the blind.

The Braille alphabet

Braille can be seen as the world's second (after Barbier's night writing system) binary encoding scheme for representing the characters of a writing system. The system as originally invented by Braille consists of two parts:

  1. A character encoding for mapping characters of the French language to tuples of six bits or dots.
  2. A way of representing six-bit characters as raised dots in a Braille cell.

Today different Braille codes (or code pages) are used to map character sets of different languages to the six bit cells. Different Braille codes are also used for different uses like mathematics and music. However, because the six-dot Braille cell only offers 64 possible combinations, of which some are omitted because they feel the same (having the same dots pattern in a different position), many Braille characters have different meanings based on their context. Therefore, character mapping is not one-to-one.

In addition to simple encoding, modern Braille transcription uses contractions to increase reading speed. (See: Grade 2 Braille)



The Braille cell

Braille generally consists of cells of six raised dots arranged in a grid of two dots horizontally by three dots vertically. The dots are conventionally numbered 1, 2, and 3 from the top of the left column and 4, 5, and 6 from the top of the right column. The presence or absence of dots gives the coding for the symbol. Dot height is approximately 0.02 inches (0.5 mm); the horizontal and vertical spacing between dot centers within a Braille cell is approximately 0.1 inches (2.5 mm); the blank space between dots on adjacent cells is approximately 0.15 inches (3.75 mm) horizontally and 0.2 inches (5.0 mm) vertically. A standard Braille page is 11 inches by 11.5 inches and typically has a maximum of 40 to 43 Braille cells per line and 25 lines.

Encoding

As originally conceived by Louis Braille, a sequence of characters, using the top four dots of the Braille cell, represents letters a through j. Dot 3 is added to each of the a through j symbols to give letters k through t. Both of the bottom dots (dots 3 and 6) are added to the symbols for "a" through e to give letters u, v, x, y, and z. The letter w is an exception to the pattern because French did not make use of the letter "w" at the time Louis Braille devised his alphabet, and thus he had no need to encode the letter "w".

English Braille codes the letters and punctuation, and some double letter signs and word signs directly, but capitalization and numbers are dealt with by using a prefix symbol. In practice, Braille produced in the United Kingdom does not have capital letters.

There are Braille code for representing shorthand (produced on a machine which embosses a paper tape) and for representing mathematics (Nemeth Code) and musical notation (Braille music).

Writing Braille

Braille may be produced using a slate and stylus in which each dot is created from the back of the page, writing in mirror image, by hand, or it may be produced on a Braille typewriter or Perkins Brailler, or produced by a Braille embosser attached to a computer. It may also be rendered using a refreshable Braille display.

Braille has been extended to an 8-dot code, particularly for use with Braille embossers and refreshable Braille displays. In 8-dot Braille the additional dots are added at the bottom of the cell, giving a matrix 4 dots high by 2 dots wide. The additional dots are given the numbers 7 (for the lower-left dot) and 8 (for the lower-right dot). Eight-dot Braille has the advantages that the case of an individual letter is directly coded in the cell containing the letter and that all the printable ASCII characters can be represented in a single cell. All 256 (28) possible combinations of 8 dots are encoded by the Unicode standard. Braille with six dots is frequently stored as Braille ASCII.

The first ten letters of the alphabet and the numbers 1 through 0 are formed using only the top four dots (1, 2, 4, and 5). Adding dot 3 forms the next ten letters, and adding dot 6 forms the last five letters (except w) and the words and, for, of, the, and with. Omitting dot 3 from the letters U-Z and the five word symbols forms nine digraphs (ch, gh, sh, th, wh, ed, er, ou, and ow) and the letter w.

Letters and numbers

Other symbols

The question mark is represented by dots 2-3-6—the same as the opening quotation mark. Therefore the placement of the dots—before a word or after a word—will determine which symbol it is.

Opening and closing parentheses are shown with the same symbol. Therefore, the placement context will determine whether the parentheses is opening or closing.

Grade 2 Braille contractions

This is just a small sample of some of the contractions that are used in Grade 2 Braille. More information about Grade 2 Braille is below in the section on Braille transcription.

Braille also includes a number of whole word contractions, for example the word Braille becomes a three cell word brl.

Unicode rendering table

The Unicode standard encodes 8-dot Braille glyphs according to their binary appearance, rather than following the alphabetic order of any particular convention. Unicode defines the "Braille Patterns" character block in the hex codepoint range from 2800 to 28FF.

Braille Letter        Braille Letter
A 1 T
B 2 U
C 3 V
D 4 W
E 5 X
F 6 Y
G 7 Z
H 8 Capital sign
I 9 Number sign
J 0 Period
K Comma
L Question mark
M Semicolon
N Exclamation point
O Opening quote
P Closing quote
Q Bracket
R Hyphen
S Apostrophe

Braille transcription

Although it is possible to transcribe Braille by simply substituting the equivalent Braille character for its printed equivalent, such a character-by-character transcription (known as Grade 1 Braille) is used only by beginners.

Braille characters are much larger than their printed equivalents, and the standard 11" by 11.5" (28 cm × 30 cm) page has room for only 25 lines of 43 characters. To reduce space and increase reading speed, virtually all Braille books are transcribed in what is known as Grade 2 Braille, which uses a system of contractions to reduce space and speed the process of reading. As with most human linguistic activities, Grade 2 Braille embodies a complex system of customs, styles, and practices. The Library of Congress's Instruction Manual for Braille Transcribing runs to nearly 200 pages. Braille transcription is skilled work, and Braille transcribers need to pass certification tests.

In English, the system of Grade 2 Braille contractions begins with a set of 23 words which are contracted to single characters. Thus the word but is contracted to the single letter b, can to c, do to d, and so on. Even this simple rule creates issues requiring special cases; for example, d is, specifically, an abbreviation of the verb do; the noun do representing the note of the musical scale is a different word, and must be spelled out.

Portions of words may be contracted, and many rules govern this process. For example, the character with dots 2-3-5 (the letter "f" lowered in the Braille cell) stands for "ff" when used in the middle of a word. At the beginning of a word, this same character stands for the word "to" although the character is written in Braille with no space following it. At the end of a word, the same character represents an exclamation point.

The contraction rules take into account the linguistic structure of the word; thus, contractions are not to be used when their use would alter the usual Braille form of a base word to which a prefix or suffix has been added. And some portions of the transcription rules are not fully codified and rely on the judgment of the transcriber. Thus, when the contraction rules permit the same word in more than one way, preference is given to "the contraction that more nearly approximates correct pronunciation."

Grade 3 Braille is a system that includes many additional contractions, almost a shorthand; it is not used for publication, but is used mostly for individuals for their personal convenience.

The current series of Canadian banknotes have raised dots on the banknotes that indicate the denomination and can be easily identified by visually impaired people; this 'tactile feature' does not use standard Braille but, instead, a system developed in consultation with blind and visually impaired Canadians after research indicated that not all potential users read Braille.

Mexican bank notes also have special raised symbols to make them identifiable by the visually impaired.

Though Braille is thought to be the main way blind people read and write, in Britain (for example) out of the reported two-million visually impaired population, it is estimated that only around 15-20 thousand people use Braille. Younger people are turning to electronic text on computers instead; a more portable communication method that they can also use with their friends. A debate has started on how to make Braille more attractive and for more teachers to be available to teach it.

In India there are instances where the parliament acts have been published in Braille too. For example 'The Right to Information Act'

Braille for other scripts

'' See main articles: Hebrew Braille, Japanese Braille, Korean Braille, Vietnamese Braille, Tibetan Braille, and Chinese Braille.

There are many extensions of Braille for additional letters with diacritics, such as ç, ô, é.

When Braille is adapted to languages which do not use the Latin alphabet, the blocks are generally assigned to the new alphabet according to how it is transliterated into the Latin alphabet, and the alphabetic order of the national script (and therefore the natural order of Latin Braille) is disregarded. Such is the case with Russian, Greek, Hebrew, Arabic, and Chinese. In Greek, for example, gamma is written as Latin g, despite the fact that it has the alphabetic position of c; Hebrew bet, the second letter of the alphabet and cognate with the Latin letter b, is sometimes pronounced /b/ and sometimes /v/, and is written b or v accordingly; Russian ts is written as c, which is the usual letter for /ts/ in those Slavic languages that use the Latin alphabet; and Arabic f is written as f, despite being historically p, and occurring in that part of the Arabic alphabet (between historic o and q). Esperanto letters with circumflexes, ĉ, ĝ, ĥ, ĵ and ŝ, are written as those letters without circumflexes with a filled sixth dot. Therefore the letter ĵ has the same representation as the English w and to write a w in Esperanto, the dot 3 is filled (dots 2-3-4-5-6 are used for w instead of dots 2-4-5-6) The ŭ, used in Esperanto also, is as the u but the first dot is moved to the fourth place.

Greater differences occur in Chinese Braille. In the case of Mandarin Braille, which is based on Zhuyin rather than the Latin Pinyin alphabet, the traditional Latin Braille values are used for initial consonants and the simple vowels. However, on Latin Braille for many of the initial consonants and simple vowels (based on romanizations of a century ago), but the blocks pull double duty, with different values depending on whether they're placed in syllable-initial or syllable-final position. For instance, the block for Latin k represents old-style Cantonese k (g in Yale and other modern romanizations) when initial, but aak when final, while Latin j represents Cantonese initial j but final oei.

However, at least three adaptations of Braille have completely reassigned the Latin sound values of the blocks. These are, Japanese Braille, Korean Braille, and Tibetan Braille.

In Japanese Braille, alphabetic signs for a consonant and vowel are combined into a single syllabic block; in Korean Braille, the consonants have different syllable-initial and syllable-final forms. These modifications made Braille much more compatible with Japanese kana and Korean hangul, but meant that the Latin sound values could not be maintained.

See also

External links

Organizations

Libraries

Learning

History

Documents

Legal

Language specific resources

Computer resources

Search another word or see brailleon Dictionary | Thesaurus |Spanish
Copyright © 2014 Dictionary.com, LLC. All rights reserved.
  • Please Login or Sign Up to use the Recent Searches feature
FAVORITES
RECENT

;