Added to Favorites

Related Searches

Definitions

Nearby Words

In computing and electronic systems, binary-coded decimal (BCD) is an encoding for decimal numbers in which each digit is represented by its own binary sequence. Its main virtue is that it allows easy conversion to decimal digits for printing or display and faster decimal calculations. Its drawbacks are the increased complexity of circuits needed to implement mathematical operations and a relatively inefficient encoding—it occupies more space than a pure binary representation. ## Basics

## BCD in electronics

## Packed BCD

### Fixed-point packed decimal

### Higher-density encodings

## Zoned decimal

Some implementations (notably IBM mainframe systems) support zoned decimal numeric representations. Each decimal digit is stored in one byte, with the lower four bits encoding the digit in BCD form. The upper four bits, called the "zone" bits, are usually set to a fixed value so that the byte holds a character value corresponding to the digit. EBCDIC systems use a zone value of 1111 (hex F); this yields bytes in the range F0 to F9 (hex), which are the EBCDIC codes for the characters "0" through "9". Similarly, ASCII systems use a zone value of 0011 (hex 3), giving character codes 30 to 39 (hex).### EBCDIC zoned decimal conversion table

### Fixed-point zoned decimal

## IBM and BCD

IBM used the terms binary-coded decimal and BCD for 6-bit alphameric codes that represented numbers, upper-case letters and special characters. Some variation of BCD alphamerics was used in most early IBM computers, including the IBM 1620, IBM 1400 series, and non-Decimal Architecture members of the IBM 700/7000 series. ## Addition with BCD

## Subtraction with BCD

## Background

## Legal history

## Comparison with pure binary

### Advantages

### Disadvantages

## Applications

The BIOS in many PCs keeps the date and time in BCD format, probably for historical reasons (it avoided the need for binary to ASCII conversion).
## Representational variations

Various BCD implementations exist that employ other representations for numbers. Programmable calculators manufactured by Texas Instruments, Hewlett-Packard, and others typically employ a floating-point BCD format, typically with two or three digits for the (decimal) exponent. The extra bits of the sign digit may be used to indicate special numeric values, such as infinity, underflow/overflow, and error (a blinking display).
## Alternative encodings

## See also

## References

## External links

Though BCD is not as widely used as it once was, decimal fixed-point and floating-point are still important and still used in financial, commercial, and industrial computing; modern decimal floating-point representations use base-10 exponents, but not BCD encodings.

In BCD, a digit is usually represented by four bits which, in general, represent the values/digits/characters 0-9. Other bit combinations are sometimes used for sign or other indications.

To BCD-encode a decimal number using the common encoding, each decimal digit is stored in a four-bit nibble.

Decimal: 0 1 2 3 4 5 6 7 8 9

BCD: 0000 0001 0010 0011 0100 0101 0110 0111 1000 1001

Thus, the BCD encoding for the number 127 would be:

0001 0010 0111

Since most computers store data in eight-bit bytes, there are two common ways of storing four-bit BCD digits in those bytes:

- each digit is stored in one nibble of a byte, with the other nibble being set to all zeros, all ones (as in the EBCDIC code), or to 0011 (as in the ASCII code)
- two digits are stored in each byte.

Unlike binary-encoded numbers, BCD-encoded numbers can easily be displayed by mapping each of the nibbles to a different character. Converting a binary-encoded number to decimal for display is much harder, as this generally involves integer multiplication or divide operations.

BCD is very common in electronic systems where a numeric value is to be displayed, especially in systems consisting solely of digital logic, and not containing a microprocessor. By utilizing BCD, the manipulation of numerical data for display can be greatly simplified by treating each digit as a separate single sub-circuit. This matches much more closely the physical reality of display hardware—a designer might choose to use a series of separate identical 7-segment displays to build a metering circuit, for example. If the numeric quantity were stored and manipulated as pure binary, interfacing to such a display would require complex circuitry. Therefore, in cases where the calculations are relatively simple working throughout with BCD can lead to a simpler overall system than converting to 'pure' binary.

The same argument applies when hardware of this type uses an embedded microcontroller or other small processor. Often, smaller code results when representing numbers internally in BCD format, since a conversion from or to binary representation can be expensive on such limited processors. For these applications, some small processors feature BCD arithmetic modes, which assist when writing routines that manipulate BCD quantities.

A widely used variation of the two-digits-per-byte encoding is called packed BCD (or simply packed decimal). All of the upper bytes of a multi-byte word plus the upper four bits (nibble) of the lowest byte are used to store decimal integers. The lower four bits of the lowest byte are used as the sign flag. As an example, a 32 bit word contains 4 bytes or 8 nibbles. Packed BCD uses the upper 7 nibbles to store the integers of a decimal value and uses the lowest nibble to indicate the sign of those integers.

Standard sign values are 1100 (Ch) for positive (+) and 1101 (Dh) for negative (-). Other allowed signs are 1010 (Ah) and 1110 (Eh) for positive and 1011 (Bh) for negative. Some implementations also provide unsigned BCD values with a sign nibble of 1111 (Fh). In packed BCD, the number 127 is represented by "0001 0010 0111 1100" (127Ch) and -127 is represented by "0001 0010 0111 1101 (127Dh).

Sign Digit | BCD 8 4 2 1 | Sign | Notes |
---|---|---|---|

A | 1 0 1 0 | + | |

B | 1 0 1 1 | − | |

C | 1 1 0 0 | + | Preferred |

D | 1 1 0 1 | − | Preferred |

E | 1 1 1 0 | + | |

F | 1 1 1 1 | + | Unsigned |

No matter how many bytes wide a word is, there are always an even number of nibbles because each byte has two of them. Therefore, a word of n bytes can contain up to (2n)-1 decimal digits, which is always an odd number of digits. A decimal number with d digits requires ½(d+1) bytes of storage space.

For example, a four-byte (32bit) word can hold seven decimal digits plus a sign, and can represent values ranging from ±9,999,999. Thus the number -1,234,567 is 7 digits wide and is encoded as:

0001 0010 0011 0100 0101 0110 0111 1101

(Note that, like character strings, the first byte of the packed decimal – with the most significant two digits – is usually stored in the lowest address in memory, independent of the endianness of the machine).

In contrast, a four-byte binary two's complement integer can represent values from −2,147,483,648 to +2,147,483,647.

While packed BCD does not make optimal use of storage (about ^{1}/_{6} of the memory used is wasted), conversion to ASCII, EBCDIC, or the various encodings of Unicode is still trivial, as no arithmetic operations are required. The extra storage requirements are usually offset by the need for the accuracy that fixed-point decimal arithmetic provides. More dense packings of BCD exist which avoid the storage penalty and also need no arithmetic operations for common conversions.

Fixed-point decimal numbers are supported by some programming languages (such as COBOL and PL/I), and provide an implicit decimal point in front of one of the digits. For example, a packed decimal value encoded with the bytes 12 34 56 7C represents the fixed-point value +1,234.567 when the implied decimal point is located between the 4th and 5th digits.

12 34 56 7C

`12 34.56 7+`

If a decimal digit requires four bits, then three decimal digits require 12 bits. However, since 2^{10} (1,024) is greater than 10^{3} (1,000), if three decimal digits are encoded together, only 10 bits are needed. Two such encodings are Chen-Ho encoding and Densely Packed Decimal. The latter has the advantage that subsets of the encoding encode two digits in the optimal 7 bits and one digit in 4 bits, as in regular BCD.

For signed zoned decimal values, the rightmost (least significant) zone nibble holds the sign digit, which is the same set of values that are used for signed packed decimal numbers (see above). Thus a zoned decimal value encoded as the hex bytes F1 F2 D3 represents the signed decimal value −123:

F1 F2 D3

` 1 2 −3`

Digit | EBCDIC Display | EBCDIC Hex |
---|---|---|

0+ | { (*) | X'C0' |

1+ | A | X'C1' |

2+ | B | X'C2' |

3+ | C | X'C3' |

4+ | D | X'C4' |

5+ | E | X'C5' |

6+ | F | X'C6' |

7+ | G | X'C7' |

8+ | H | X'C8' |

9+ | I | X'C9' |

0− | } (*) | X'D0' |

1− | J | X'D1' |

2− | K | X'D2' |

3− | L | X'D3' |

4− | M | X'D4' |

5− | N | X'D5' |

6− | O | X'D6' |

7− | P | X'D7' |

8− | Q | X'D8' |

9− | R | X'D9' |

(*) Note: These characters vary depending on the local character code page.

Some languages (such as COBOL and PL/I) directly support fixed-point zoned decimal values, assiging an implicit decimal point at some location between the decimal digits of a number. For example, given a six-byte signed zoned decimal value with an implied decimal point to the right of the fourth digit, the hex bytes F1 F2 F7 F9 F5 C0 represent the value +1,279.50:

F1 F2 F7 F9 F5 C0

` 1 2 7 9. 5 +0`

Bit positions in BCD alphamerics were usually labelled B, A, 8, 4, 2 and 1. For encoding digits, B and A were zero. The letter A was encoded (B,A,1).

In the 1620 BCD alphamerics were encoded using digit pairs, with the "zone" in the even digit and the "digit" in the odd digit. Input/Output translation hardware converted between the internal digit pairs and the external standard 6-bit BCD codes.

In the Decimal Architecture IBM 7070, IBM 7072, and IBM 7074 alphamerics were encoded using digit pairs (using two-out-of-five code in the digits, not BCD) of the 10-digit word, with the "zone" in the left digit and the "digit" in the right digit. Input/Output translation hardware converted between the internal digit pairs and the external standard six-bit BCD codes.

With the introduction of System/360, IBM expanded 6-bit BCD alphamerics to 8-bit EBCDIC, allowing the addition of many more characters (e.g., lowercase letters). A variable length Packed BCD numeric data type was also implemented.

Today, BCD data is still heavily used in IBM processors and databases, such as IBM DB2, mainframes, and Power6. In these products, the BCD is usually zoned BCD (as in EBCDIC or ASCII), Packed BCD, or 'pure' BCD encoding. All of these are used within hardware registers and processing units, and in software.

It is possible to perform addition in BCD by first adding in binary, and then converting to BCD afterwards. Conversion of the simple sum of two digits can be done by adding 6 (that is, 16 – 10) when the result has a value of greater-than 9. For example:

- 9+8=17 = [1001] + [1000] = [10001] in binary.

However, in BCD, there cannot exist a value greater than 9 (1001) per nibble. To correct this, 6 is added to that sum to get the correct first two digits:

- [0000 1000] + [10001 0110] = [0001 0111]

which gives two nibbles, [0001] and [0111] which correspond to "1" and "7" respectively. This gives the 17 in BCD, which is the correct result. This technique can be extended to adding multiple digits, by adding in groups from right to left, propragating the second digit as a carry, always comparing the 5-bit result of a digit-pair sum to 9.

See also Douglas Jones' Tutorial

Subtraction is done by adding the nines' complement plus 1, or by adding the ten's complement of the subtrahend.

The binary-coded decimal scheme described in this article is the most common encoding, but there are many others. The method here can be referred to as Simple Binary-Coded Decimal (SBCD) or BCD 8421.
In the headers to the table, the '8 4 2 1', etc., indicates the weight of each bit shown; note that in the 5^{th} column two of the weights are negative. Both ASCII and EBCDIC character codes for the digits are examples of zoned BCD, and are also shown in the table.

The following table represents decimal digits from 0 to 9 in various BCD systems:

Digit | BCD 8 4 2 1 | Excess-3 or Stibitz Code | BCD 2 4 2 1 or Aiken Code | BCD 8 4 −2 −1 | IBM 702 IBM 705 IBM 7080 IBM 1401 8 4 2 1 | ASCII 0000 8421 | EBCDIC 0000 8421 |
---|---|---|---|---|---|---|---|

0 | 0000 | 0011 | 0000 | 0000 | 1010 | 0011 0000 | 1111 0000 |

1 | 0001 | 0100 | 0001 | 0111 | 0001 | 0011 0001 | 1111 0001 |

2 | 0010 | 0101 | 0010 | 0110 | 0010 | 0011 0010 | 1111 0010 |

3 | 0011 | 0110 | 0011 | 0101 | 0011 | 0011 0011 | 1111 0011 |

4 | 0100 | 0111 | 0100 | 0100 | 0100 | 0011 0100 | 1111 0100 |

5 | 0101 | 1000 | 1011 | 1011 | 0101 | 0011 0101 | 1111 0101 |

6 | 0110 | 1001 | 1100 | 1010 | 0110 | 0011 0110 | 1111 0110 |

7 | 0111 | 1010 | 1101 | 1001 | 0111 | 0011 0111 | 1111 0111 |

8 | 1000 | 1011 | 1110 | 1000 | 1000 | 0011 1000 | 1111 1000 |

9 | 1001 | 1100 | 1111 | 1111 | 1001 | 0011 1001 | 1111 1001 |

In 1972, the U.S. Supreme Court overturned a lower court decision which had allowed a patent for converting BCD encoded numbers to binary on a computer (see Gottschalk v Benson). This was an important case in determining the patentability of software and algorithms.

- Scaling by a factor of 10 (or a power of 10) is simple; this is useful when a decimal scaling factor is needed to represent a non-integer quantity (e.g., in financial calculations)
- Rounding at a decimal digit boundary is simpler.
- Alignment of two decimal numbers (for example 1.3 + 27.08) is a simple, exact, shift
- Conversion to a character form or for display (e.g., to a text-based format such as XML, or to drive signals for a seven-segment display) is a simple per-digit mapping, and can be done in linear (O(n)) time. Conversion from pure binary involves relatively complex logic that spans digits, and for large numbers no linear-time conversion algorithm is known (see Binary numeral system).
- Some non-integral values, such as 0.2, have a finite place-value representation in decimal but not in binary; consequently a system based on binary place-value representations would introduce a small error representing such a value, which may be compounded by further computation if careful numerical considerations are not made. Note that if computation is not performed on the value this is not an issue, since it suffices to represent it using enough bits that when rounded to the original number of decimal digits the original value is correctly recovered.

- Some operations are more complex to implement. Adders require extra logic to cause them to wrap and generate a carry early. 15–20% more circuitry is needed for BCD add compared to pure binary. Multiplication requires the use of algorithms that are somewhat more complex than shift-mask-add (a binary multiplication, requiring binary shifts and adds or the equivalent, per-digit or group of digits is required)
- Standard BCD requires four bits per digit, roughly 20% more space than a binary encoding. When packed so that three digits are encoded in ten bits, the storage overhead is reduced to about 0.34%, at the expense of an encoding that is unaligned with the 8-bit byte boundaries common on existing hardware, resulting in slower implementations on these systems.

- Practical existing implementations of BCD are typically slower than operations on binary representations, especially on embedded systems, due to limited processor support for native BCD operations.

If error in representation and computation is the primary concern, rather than efficiency of conversion to and from display form, a scaled binary representation may be used, which stores a decimal number as a binary-encoded integer and a binary-encoded signed decimal exponent. For example, 0.2 can be represented as 2. This representation allows rapid multiplication and division, but may require multiplication by a power of 10 during addition and subtraction to align the decimals. It is particularly appropriate for applications with a fixed number of decimal places, which do not require adjustment during addition and subtraction and need not store the exponent explicitly.

Chen-Ho encoding provides a boolean transformation for converting groups of three BCD-encoded digits to and from 10-bit values that can be efficiently encoded in hardware with only 2 or 3 gate delays. Densely Packed Decimal is a similar scheme that deals more efficiently and conveniently with the case where the number of digits is not a multiple of 3.

- Arithmetic Operations in Digital Computers, R. K. Richards, 397pp, D. Van Nostrand Co., NY, 1955
- Schmid, Hermann, Decimal computation, ISBN 047176180X, 266pp, Wiley, 1974
- Superoptimizer: A Look at the Smallest Program, Henry Massalin, ACM Sigplan Notices, Vol. 22 #10 (Proceedings of the Second International Conference on Architectural support for Programming Languages and Operating Systems), pp122-126, ACM, also IEEE Computer Society Press #87CH2440-6, October 1987
- VLSI designs for redundant binary-coded decimal addition, Behrooz Shirazi, David Y. Y. Yun, and Chang N. Zhang, IEEE Seventh Annual International Phoenix Conference on Computers and Communications, 1988, pp52-56, IEEE, March 1988
- Fundamentals of Digital Logic by Brown and Vranesic, 2003
- Modified Carry Look Ahead BCD Adder With CMOS and Reversible Logic Implementation, Himanshu Thapliyal and Hamid R. Arabnia, Proceedings of the 2006 International Conference on Computer Design (CDES'06), ISBN 1-60132-009-4, pp64-69, CSREA Press, November 2006
- Reversible Implementation of Densely-Packed-Decimal Converter to and from Binary-Coded-Decimal Format Using in IEEE-754R, A. Kaivani, A. Zaker Alhosseini, S. Gorgin, and M. Fazlali, 9th International Conference on Information Technology (ICIT'06), pp273-276, IEEE, December 2006.

See also the Decimal Arithmetic Bibliography

- IBM: Chen-Ho encoding
- IBM: Densely Packed Decimal
- libpbcd: Open source GPL Packed BCD library for data portability

Wikipedia, the free encyclopedia © 2001-2006 Wikipedia contributors (Disclaimer)

This article is licensed under the GNU Free Documentation License.

Last updated on Wednesday October 08, 2008 at 19:25:02 PDT (GMT -0700)

View this article at Wikipedia.org - Edit this article at Wikipedia.org - Donate to the Wikimedia Foundation

This article is licensed under the GNU Free Documentation License.

Last updated on Wednesday October 08, 2008 at 19:25:02 PDT (GMT -0700)

View this article at Wikipedia.org - Edit this article at Wikipedia.org - Donate to the Wikimedia Foundation

Copyright © 2014 Dictionary.com, LLC. All rights reserved.