TV modulators take the audio and video signal from a composite video, RGB, YUV or internal source, and generates a PAL or NTSC broadcast signal that can be fed into a television's aerial/coaxial connector.
Internal RF modulators are commonly found in VCRs, and older video game consoles such as the Atari 2600, NES, or Sega Genesis. During the 1980s and early 90s, it was common for video game systems that did not have internal RF modulators to provide external units that connected to the antenna jacks of a television. RF modulators produce a relatively poor picture, as image quality is lost during both the modulation from the source device, and the demodulation in the television, but the aerial connector is standard on all TV sets, even very old ones. Since later television designs include composite, S-Video, and component video jacks, game manufacturers have stopped including modulators. RF modulators are now largely a third-party product, purchased primarily to run newer equipment such as DVD players on old televisions.
RF modulators generally output on channel 3 or 4, although the Atari consoles offer channels 2 & 3. In Europe standard modulators use channel 36 (UHF).
Modulating a TV signal with stereo sound is relatively complex and most low-cost home TV modulators produce a signal with monaural audio. Even some units that have two audio inputs simply combine the left and right audio channels into one mono audio signal.
Multi-channel RF modulators are commonly used in home audio/video distribution. These devices have multiple audio and video inputs and one RF output. Audio/video outputs from source devices such as a DVD player, VCR, or DSS receiver are connected to the audio/video inputs on the modulator. The modulator is then programmed to broadcast the signals on a certain frequency. That RF broadcast is then received by the connected TV. When the TV is tuned to the programmed channel, the audio/video signal of the source device is accessed. RF modulation can become difficult in a CATV system. High pass, low pass, and notch filters must be used to block certain frequencies, or channels, so that the modulator can broadcast the audio/video signal of the source device on that channel.
US Patent Issued to Korea Electronics Technology Institute on July 19 for "Digital If Wireless Transmitter, RF Modulator, and RF Modulating Method" (South Korean Inventors)
Jul 26, 2011; ALEXANDRIA, Va., July 26 -- United States Patent no. 7,983,630, issued on July 19, was assigned to Korea Electronics Technology...
US Patent Issued to Electronics and Telecommunications Research Institute on Sept. 24 for "Digital RF Converter, Digital RF Modulator and Transmitter Including the Same" (South Korean Inventors)
Sep 24, 2013; ALEXANDRIA, Va., Sept. 24 -- United States Patent no. 8,542,773, issued on Sept. 24, was assigned to Electronics and...
US Patent Issued to Harris on June 28 for "Electronic Device with a Distortion Correction Circuit for a Power Amplifier, and Associated Methods" (New York Inventor)
Jul 03, 2011; ALEXANDRIA, Va., July 3 -- United States Patent no. 7,970,360, issued on June 28, was assigned to Harris Corp. (Melbourne, Fla...