(also base load
, or baseload demand
) is the minimum amount of power that a utility or distribution company must make available to its customers, or the amount of power required to meet minimum demands based on reasonable expectations of customer requirements. Baseload values typically vary from hour to hour in most commercial and industrial areas.
Baseload plant, (also baseload power plant or base load power station) is an energy plant devoted to the production of baseload supply. Baseload plants are the production facilities used to meet some or all of a given region's continuous energy demand, and produce energy at a constant rate, usually at a low cost relative to other production facilities available to the system. Examples of baseload plants using nonrenewable fuels include nuclear and coal-fired plants. Among the renewable energy sources, hydroelectric, geothermal and OTEC can provide baseload power. Baseload plants typically run at all times through the year except in the case of repairs or scheduled maintenance. (Hydroelectric power also has the desirable attribute of dispatchability, but a hydroelectric plant may run low on its fuel (water at the reservoir elevation) if a long drought occurs over its drainage basin.)
Each baseload power plant on a grid is allotted a specific amount of the baseload power demand to handle. The base load power is determined by the load duration curve of the system. For a typical power system, the rule of thumb is that the base load power is usually 35-40% of the maximum load during the year.
Peaks or spikes in customer power demand are handled by smaller and more responsive types of power plants called peaking power plants.
Power plants are designated base load based on their low cost generation, efficiency and safety at set outputs. Baseload power plants do not change production to match power consumption demands since it is always cheaper to run them rather than running higher cost combined cycle plants or combustion turbines. Baseload generators, such as nuclear and coal, often have very large fixed costs
and very low marginal costs
. On the other hand, peak load generators, such as natural gas , have low fixed costs and high marginal costs. Typically these plants are large and provide a majority of the power used by a grid. Thus, they are more effective when used continuously to cover the power baseload required by the grid
Base load power plant usage
power plants may take many hours, if not days, to achieve a steady state power output. On the other hand, they have low fuel costs
. Because they require a long period of time to heat up to operating temperature, these plants typically handle large amounts of baseload demand. Different plants and technologies may have differing capacities to increase or decrease output on demand: nuclear plants are generally run at close to peak output continuously (apart from maintenance, refueling
and periodic refurbishment), while coal-fired plants may be cycled over the course of a day to meet demand. Plants with multiple generating units may be used as a group to improve the "fit" with demand, by operating each unit as close to peak efficiency