The Oldsmobile Alero was introduced in spring 1998 as a 1999 model to replace the Achieva and Cutlass. The Alero went into production on April 6, 1998. All Aleros were built in Lansing, Michigan. The Alero was Oldsmobile's last compact car as well as the last vehicle sold under the brand. Production ended on April 28, 2004.
The Alero was sold either as a 4-door sedan or as a 2-door coupé. It shared its chassis and many parts, including engines, with the Pontiac Grand Am, the other compact N body sedan. All Aleros came in base GX, mid-level GL, or high-end GLS trim; GL trim was split into three levels: 1, 2, and 3.
The Alero experienced minimal changes during its 5-year run. Most of these changes were either in choice of engines or options. In 2003, the Alero's daytime running lights were changed from high-beam to low-beam.
The Alero was also sold in select European countries as the Chevrolet Alero, although only available as a sedan. The car still featured its Oldsmobile badges even though sold under the Chevrolet brand, since most European consumers would not recognize what the badge stood for. Chevrolet badges were added to the grille and rear fascia during the 2000 model year. Since the phase-out of the Alero, it was replaced in Europe and Canada by the GM Daewoo-sourced Chevrolet Evanda/Epica.
Alero production ended with a special Final 500 Edition. These last 500 Aleros featured custom graphics inspired by vintage Oldsmobile logos, dark cherry metallic paint, and a plate featuring the car's number out of 500.
The final Alero Final 500 Edition (#500 of 500), a GLS 4-door, also happened to be the final Oldsmobile ever built, and was signed under its hood by the employees of the General Motors Lansing plant and then given to the R.E. Olds Transportation Museum.
A preview of the planned replacement for the Alero was seen in 2001 with the unveiling of the Oldsmobile O4 concept, designed by Bertone. The car was an open top 4-seater with European styling but some Oldsmobile traits, and powered by the latest Ecotec I4 engine. The name had multiple meanings, including "Oldsmobile 4-Seater" as well as implying the year 2004 as a planned date for production.
Unfortunately, the O4 concept was unveiled a few weeks after General Motors announced that they would be phasing out the Oldsmobile brand, meaning that production possibilities of the O4 would never see reality. Because of this, a second generation Alero was never built and the car was phased out in 2004.
| Years | Engine | Power | Torque |
|---|---|---|---|
| 2002-2004 | 2.2 L Ecotec L61 I4 | ||
| 1999-2001 | 2.4 L LD9 I4 | ||
| 1999-2004 | 3.4 L LA1 V6 |
More common problems reside in the suspension and brake systems. The front strut mounts are prone to wear, and creaking emanating from the front end may be one symptom. The front brake calipers, pads, and rotors contribute to premature rotor wear. It is not uncommon to resurface or replace warped front rotors after just 20,000 miles of use. Further, the front wheel bearing is another common trouble spot. Both the bearing and its internal wheel speed sensor are prone to failure. The bearing has failed so often that GM has issued a revised axle nut and torque specification to ease the axial load on the bearing assembly. The speed sensor's failure is characterized by a "triple warning", wherein the ABS, TRAC OFF, and SERVICE ENGINE SOON lights illuminate either constantly or intermittently.
General Motors commissioned the construction of Alero prototypes either for testing or to gather public opinion on possible future plans for the Alero. These variants include: