A UFS volume is composed of the following parts:
Inodes are numbered sequentially. The first several inodes are reserved for historical reasons, followed by the inode for the root directory.
Directory files contain only the list of filenames in the directory and the inode associated with each file. All file metadata is kept in the inode.
Early versions of Unix used filesystems referred to simply as FS. FS only included the boot block, superblock, a clump of inodes, and the data blocks. This worked well for the small disks early Unixes were designed for, but as technology advanced and disks got larger, moving the head back and forth between the clump of inodes and the data blocks they referred to caused thrashing. BSD optimized this in FFS (Fast File System) by inventing cylinder groups, breaking the disk up into smaller chunks, each with its own inode clump and data blocks.
The intent of BSD FFS is to try to localize associated data blocks and metadata in the same cylinder group, and ideally, all of the contents of a directory (both data and metadata for all the files) in the same or nearby cylinder group, thus reducing fragmentation caused by scattering a directory's contents over a whole disk.
Some of the performance parameters in the superblock included number of tracks and sectors, disk rotation speed, head speed, and alignment of the sectors between tracks. In a fully optimized system, the head could be moved between close tracks to read scattered sectors from alternating tracks while waiting for the platter to spin around.
As disks grew larger and larger, sector level optimization became obsolete (especially with disks that used linear sector numbering and variable sectors per track). With larger disks and larger files, fragmented reads became more of a problem. To combat this, BSD originally increased the filesystem block size from one sector to 1k in 4.0BSD, and, in FFS, increased the filesystem block size from 1k to 8k. This has several effects. The chances of a file's sectors being contiguous is much greater. The amount of overhead to list the file's blocks is reduced. The number of blocks representable in a fixed bit width block number is increased (allowing for larger disks).
With larger block sizes, disks with many small files would waste a lot of space, so BSD added block level fragmentation (also called block suballocation, tail merging or tail packing), where the last partial block of data from several files may be stored in a single "fragment" block instead of multiple mostly empty blocks (Allen 2005).
Vendors of some commercial Unix systems, such as SunOS/Solaris, System V Release 4, HP-UX, and Tru64 UNIX, have adopted UFS. Most of them adapted UFS to their own uses, adding proprietary extensions that may not be recognized by other vendors' versions of Unix. Surprisingly, many have continued to use the original block size and data field widths as the original UFS, so some degree of (read) compatibility remains across platforms. Compatibility between implementations as a whole is spotty at best and should be researched before using it across multiple platforms where shared data is a primary intent.
In 4.4BSD and BSD Unix systems derived from it, such as FreeBSD, NetBSD, OpenBSD, and DragonFlyBSD, the implementation of UFS1 and UFS2 is split into two layers — an upper layer that provides the directory structure and supports metadata (permissions, ownership, etc.) in the inode structure, and lower layers that provide data containers implemented as inodes. This was done to support both the traditional FFS and the LFS log-structured file system with common code for common functions. The upper layer is called "UFS", and the lower layers are called "FFS" and "LFS". In some of those systems, the term "FFS" is used for the combination of the FFS lower layer and the UFS upper layer, and the term "LFS" is used for the combination of the LFS lower layer and the UFS upper layer.
Kirk McKusick extended the FreeBSD FFS and UFS layers to support a new variant, called UFS2, which adds 64-bit block pointers (allowing volumes to grow up to 8 zettabytes), variable-sized blocks (similar to extents), extended flag fields, additional 'birthtime' stamps and extended attribute support. UFS2 became the default UFS version starting with FreeBSD 5.0. FreeBSD also introduced soft updates and the ability to make file system snapshots for both UFS1 and UFS2. These have since been ported to NetBSD. OpenBSD has supported soft updates since version 2.9 and UFS2 since version 4.2
Linux includes a UFS implementation for binary compatibility at the read level with other Unixes, but since there is no standard implementation for the vendor extensions to UFS, Linux does not have full support for writing to UFS. The native Linux ext2 filesystem is inspired by UFS. (In fact, in some 4.4BSD-derived systems, the UFS layer can use an ext2 layer as a container layer, just as it can use FFS and LFS.)
NeXTStep, which was BSD-derived, also used a version of UFS. In Apple Incorporated's Mac OS X, it is available as an alternative to HFS+, their proprietary filesystem. However, as of Mac OS X v10.5, one cannot install Mac OS X "Leopard" on a UFS-formatted volume. In addition, one cannot upgrade older versions of Mac OS X installed on UFS-formatted volumes to Leopard. To upgrade to Leopard you need to reformat your startup volume.