Because of their speed, reliability, durability and low media cost, these tapes and tape drives are still in high demand. A hallmark of the genre is transferability. Tapes recorded with one tape drive are generally readable on another drive, even if the tape drives were built by different manufacturers.
Tape drives conforming with the IBM 3480 product family specification were manufactured by a variety of vendors from 1984 to 2004. Core manufacturers included IBM, Fujitsu, M4 Data, Overland Data, StorageTek and Victor Data Systems (VDS). Various models of these tape drives were also marketed under other brands, including DEC, MP Tapes, Philips, Plasmon, Qualstar, Tandem, and Xcerta.
IBM designated all versions of 3480 and 3490E tape drives as members of the 3480 Product Family.
The first 3480 tape drives were introduced in 1984. The IBM 3480 was the first tape drive to employ thin-film heads, as well as the first to use chromium dioxide tape.
It was also distinguished by a relatively high data transfer rate: 3 megabytes per second. This was because it was able to read and write linear data across 18 recording tracks simultaneously, or 38,000 bytes per inch of tape. As IBM's prior technology employed 9 recording tracks and achieved only 1600/6,250 bytes per inch of tape, the 3480 format was greeted as a major breakthrough: 200 megabytes of data per tape cartridge as opposed to the 100 megabytes on the 6250 1/2" tape reels. Do note that all drives below the 3480 use 1/2" tape on reels and are start-stop drives, while the 3480 and above use cartridges and are streaming drives. The 3480 was initially a disaster, because it would consistently underrun as the 3 MB/s bus and tag channels and the 3 MB/s drives could not feed the 3MB/s second tape drives because of various interferences such as seeks. The streaming drives would then have to stop, back up and restart, reducing throughput to under 200 KB/s.
While IBM offered 3480 tape drives with bus and tag interfaces, other manufacturers sold models with SCSI interfaces.
In 1986, IBM added a hardware-based data compression option: Improved Data Recording Capability (IDRC). A 3480 tape drive with IDRC could record up to 400 megabytes on a single tape. The 3480 IDRC format is also commonly known as the 3490 recording format.
A 3480 tape drive with IDRC uses the same data cartridges as a standard 3480 tape drive. It can read and write standard 3480 tapes.
IBM introduced the 3490E tape drive in 1991. Its 36-track head was able to record 800 megabytes of data on a single tape. The IDRC option allowed it to record up to 2400 megabytes on a single extended tape. The last 36-track tape drive manufacturer, VDS, discontinued production late in 2004, after IBM announced that it would no longer supply 36-track thin film tape heads.
3490E tape drives were available from a variety of manufacturers with bus and tag, ESCON, or high voltage SCSI interfaces, and were capable of data transfer speeds up to 20MB per second.
While 3490E data cartridges are the same dimensions as 3480 cartridges, the tape media is the same only longer. 3490E tape is optimized for 36-track recording heads, instead of 18-track recording heads. Nevertheless, some 3480 tape drives can record on 3490E media.
Some 3490E tape drives are able to read tapes recorded by 3480 tape drives. Others can also write tapes that can be read by 3480 tape drives. But many 3490E tape drives can only read/write 36-track tapes.
|Format||Intro Date||Capacity (MB)||Tracks|
The 3480 magnetic tape format family has been superseded by the IBM 3590 Family of magnetic tape formats, which is distinguished by much higher transfer rates and densities. Tape head sizes at this writing: 128-track, 256-track and 384-track. IBM's name for these drives is Magstar.