Several ancient philosophies used a set of archetypal classical elements to explain patterns in nature. The term 'element' was originally used to refer to a state of matter (solid/earth, liquid/water, gas/air, and plasma/fire) or a phase of matter (as in the Chinese Wu Xing), rather than the chemical elements of modern science. The Greek, Indian (Tattva and Mahābhūta) and Japanese (go dai) traditions essentially had the same five elements: Air, Earth, Fire, Water and Aether.
The term 'elements' (stoicheia) was first used by the Greek philosopher Plato in about 360 BCE, in his dialogue Timaeus, which includes a discussion of the composition of inorganic and organic bodies and is a rudimentary treatise on chemistry. Plato assumed that the minute particle of each element corresponded to one of the regular polyhedra: tetrahedron (fire), octahedron (air), icosahedron (water), and cube (earth).
Adding to the four elements of the Greek philosopher Empedocles, in about 350 BC, Aristotle also used the term "element" and conceived of a fifth element called "quintessence", which formed the heavens. Aristotle defined an element as:
Building on the theory in circa 790, Persian chemist and alchemist, Jabir ibn Hayyan (Geber), postulated that metals were formed out of two elements: sulphur, ‘the stone which burns’, which characterized the principle of combustibility, and mercury, which contained the idealized principle of metallic properties. Shortly thereafter, this evolved into the Arabic concept of the three principles: sulphur giving flammability or combustion, mercury giving volatility and stability, and salt giving solidity.
In the 10th century, Persian physician and alchemist Muhammad ibn Zakarīya Rāzi (Rhazes) wrote the Doubts concerning Galen, in which he refuted both the Galenic medical theory of four humours and the underlying ancient concept of four classical elements. He carried out an experiment which would upset these theories by inserting a liquid with a different temperature into a body resulting in an increase or decrease of bodily heat, which resembled the temperature of that particular fluid. Razi noted particularly that a warm drink would heat up the body to a degree much higher than its own natural temperature, thus the drink would trigger a response from the body, rather than transferring only its own warmth or coldness to it. Razi's chemical experiments suggested other qualities of matter, such as "oiliness" and "sulfurousness", or inflammability and salinity, which were not readily explained by the traditional fire, water, earth and air division of elements.
In 1524, Swiss chemist Paracelsus adopted Aristotle’s four element theory, but reasoned that they appeared in bodies as Geber’s three principles. Paracelsus saw these principles as fundamental, and justified them by recourse to the description of how wood burns in fire. Mercury included the cohesive principle, so that when it left in smoke the wood fell apart. Smoke represented the volatility (the mercury principle), the heat-giving flames represented flammability (sulphur), and the remnant ash represented solidity (salt).
In 1669, German physician and chemist Johann Becher published his Physica Subterranea. In modification on the ideas of Paracelsus, he argued that the constituents of bodies are air, water, and three types of earth: terra fluida, the mercurial element, which contributes fluidity and volatility; terra lapida, the solidifying element, which produces fusibility or the binding quality; and terra pinguis, the fatty element, which gives material substance its oily and combustible qualities. These three earths correspond with Geber’s three principles. A piece of wood, for example, according to Becher, is composed of ash and terra pinguis; when the wood is burnt, the terra pinguis is released, leaving the ash. In other words, in combustion the fatty earth burns away.
In 1661, Robert Boyle showed that there were more than just four classical elements as the ancients had assumed. The first modern list of chemical elements was given in Antoine Lavoisier's 1789 Elements of Chemistry, which contained thirty-three elements, including light and caloric. By 1818, Jöns Jakob Berzelius had determined atomic weights for forty-five of the forty-nine accepted elements. Dmitri Mendeleev had sixty-six elements in his periodic table of 1869.
From Boyle until the early 20th century, an element was defined as a pure substance that cannot be decomposed into any simpler substance. Put another way, a chemical element cannot be transformed into other chemical elements by chemical processes. In 1913, Henry Moseley discovered that the physical basis of the atomic number of the atom was its nuclear charge, which eventually led to the current definition. The current definition also avoids some ambiguities due to isotopes and allotropes.
By 1919, there were seventy-two known elements. In 1955, element 101 was discovered and named mendelevium in honor of Mendeleev, the first to arrange the elements in a periodic manner. In October 2006, the synthesis of element 118 was reported; however, element 117 has not yet been created in the laboratory.
As of 2006, there are 117 known elements (in this context, "known" means observed well enough, even from just a few decay products, to have been differentiated from any other element). Of these 117 elements, 94 occur naturally on Earth. Six of these occur in extreme trace quantities: technetium, atomic number 43; promethium, number 61; astatine, number 85; francium, number 87; neptunium, number 93; and plutonium, number 94. These 94 elements, and also possibly element 98 californium, have been detected in the universe at large, in the spectra of stars and also supernovae, where short-lived radioactive elements are newly being made.
The remaining 22 elements not found on Earth or in astronomical spectra have been derived artificially. All of the elements that are derived solely through artificial means are radioactive with very short half-lives; if any atoms of these elements were present at the formation of Earth, they are extremely likely to have already decayed, and if present in novae, have been in quantities too small to have been noted. Technetium was the first purportedly non-naturally occurring element to be synthesized, in 1937, although trace amounts of technetium have since been found in nature, and the element may have been discovered naturally in 1925. This pattern of artificial production and later natural discovery has been repeated with several other radioactive naturally occurring trace elements.
Lists of the elements are available by name, by symbol, by atomic number, by density, by melting point, and by boiling point as well as Ionization energies of the elements. The most convenient presentation of the elements is in the periodic table, which groups elements with similar chemical properties together.
The number of protons in the atomic nucleus also determines its electric charge, which in turn determines the electrons of the atom in its non-ionized state. This in turn (by means of the Pauli exclusion principle) determines the atom's various chemical properties. So all carbon atoms, for example, ultimately have identical chemical properties because they all have the same number of protons in their nucleus, and therefore have the same atomic number. It is for this reason that atomic number rather than mass number (or atomic weight) is considered the identifying characteristic of an element.
The relative atomic mass of an element is the average of the atomic masses of all the chemical element's isotopes as found in a particular environment, weighted by isotopic abundance, relative to the atomic mass unit (u). This number may be a fraction which is not close to a whole number, due to the averaging process. On the other hand, the atomic mass of a pure isotope is quite close to its mass number. Whereas the mass number is a natural (or whole) number, the atomic mass of a single isotope is a real number which is close to a natural number. In general, it differs slightly from the mass number as the mass of the protons and neutrons is not exactly 1 u, the electrons also contribute slightly to the atomic mass, and because of the nuclear binding energy. For example, the mass of 19F is 18.9984032 u. The only exception to the atomic mass of an isotope not being a natural number is 12C, which has a mass of exactly 12, due to the definition of u (it is fixed as 1/12th of the mass of a free carbon-12 atom, exactly).
All three of the isotopes of carbon have the same chemical properties. But they have different nuclear properties. In this example, carbon-12 and carbon-13 are stable atoms, but carbon-14 is unstable; it is slightly radioactive, decaying over time into other elements.
Like carbon, some isotopes of various elements are radioactive and decay into other elements upon radiating an alpha or beta particle. For certain elements, all their isotopes are radioactive isotopes: specifically the elements without any stable isotopes are technetium (atomic number 43), promethium (atomic number 61), and all observed elements with atomic numbers greater than 82.
Of the 80 elements with a stable isotope, 16 have only one stable isotope, and the mean number of stable isotopes for the 80 stable elements is 3.4 stable isotopes per element. The largest number of stable isotopes that occur for an element is 10 (for tin, element 50).
But for international trade, the official names of the chemical elements both ancient and recent are decided by the International Union of Pure and Applied Chemistry, which has decided on a sort of international English language. That organization has recently prescribed that "aluminium" and "caesium" take the place of the US spellings "aluminum" and "cesium", while the US "sulfur" takes the place of the British "sulphur". But chemicals which are practicable to be sold in bulk within many countries, however, still have national names, and those which do not use the Latin alphabet cannot be expected to use the IUPAC name. According to IUPAC, the full name of an element is not capitalized, even if it is derived from a proper noun such as the elements californium or einsteinium (unless it would be capitalized by some other rule). Isotopes of chemical elements are also uncapitalized if written out: carbon-12 or uranium-235.
In the second half of the twentieth century physics laboratories became able to produce nuclei of chemical elements that have a half life too short for them to remain in any appreciable amounts. These are also named by IUPAC, which generally adopts the name chosen by the discoverer. This can lead to the controversial question of which research group actually discovered an element, a question which delayed the naming of elements with atomic number of 104 and higher for a considerable time. (See element naming controversy).
Precursors of such controversies involved the nationalistic namings of elements in the late nineteenth century. For example, lutetium was named in reference to Paris, France. The Germans were reluctant to relinquish naming rights to the French, often calling it cassiopeium. The British discoverer of niobium originally named it columbium, in reference to the New World. It was used extensively as such by American publications prior to international standardization.
The current system of chemical notation was invented by Berzelius. In this typographical system chemical symbols are not used as mere abbreviations - though each consists of letters of the Latin alphabet - they are symbols intended to be used by peoples of all languages and alphabets. The first of these symbols were intended to be fully universal; since Latin was the common language of science at that time, they were abbreviations based on the Latin names of metals - Fe comes from Ferrum, Ag from Argentum. The symbols were not followed by a period (full stop) as abbreviations were. Later chemical elements were also assigned unique chemical symbols, based on the name of the element, but not necessarily in English. For example, sodium has the chemical symbol 'Na' after the Latin natrium. The same applies to "W" (wolfram) for tungsten, "Hg" (hydrargyrum) for mercury, "K" (kalium) for potassium, "Au" (aurum) for gold, "Pb" (plumbum) for lead, and "Sb" (stibium) for antimony.
Chemical symbols are understood internationally when element names might need to be translated. There are sometimes differences; for example, the Germans have used "J" instead of "I" for iodine, so the character would not be confused with a roman numeral.
The first letter of a chemical symbol is always capitalized, as in the preceding examples, and the subsequent letters, if any, are always lower case (small letters).
D2O (heavy water)
Instead of writing it like this:
The periodic table of the chemical elements is a tabular method of displaying the chemical elements. Although precursors to this table exist, its invention is generally credited to Russian chemist Dmitri Mendeleev in 1869. Mendeleev intended the table to illustrate recurring ("periodic") trends in the properties of the elements. The layout of the table has been refined and extended over time, as new elements have been discovered, and new theoretical models have been developed to explain chemical behavior.
The periodic table is now ubiquitous within the academic discipline of chemistry, providing an extremely useful framework to classify, systematize and compare all the many different forms of chemical behavior. The table has also found wide application in physics, biology, engineering, and industry. The current standard table contains 117 confirmed elements as of January 27, 2008 (while element 118 has been synthesized, element 117 has not).
The following table shows the twelve most common elements in our galaxy (estimated spectroscopically), as measured in parts per million, by mass. Nearby galaxies that have evolved along similar lines have a corresponding enrichment of elements heavier than hydrogen and helium. The more distant galaxies are being viewed as they appeared in the past, so their abundances of elements appear closer to the primordial mixture. As physical laws and processes appear common throughout the visible universe, however, it is expected that these galaxies will likewise have evolved similar abundances of elements.
|Element||Parts per million|
The first transuranium element (element with atomic number greater than 92) discovered was neptunium in 1940. As of August 2007, only the elements up to 111, roentgenium, have been confirmed as valid by IUPAC, while more or less reliable claims have been made for synthesis of elements 112, 113, 114, 115, 116 and 118. The heaviest element that is believed to have been synthesized to date is element 118, ununoctium, on October 9, 2006, by the Flerov Laboratory of Nuclear Reactions in Dubna, Russia.
Element 117, ununseptium, has not yet been created or discovered, but its place in the periodic table is preestablished.
According to Amnon Marinov and six other researchers element 122 has been detected naturally occurring in a thorium deposit., this is the first naturally occurring heavy element in more than 50 years. It has yet to be proved as it is still under confirmation by the university but could be a major development as previously all transuranic elements were artificial.
US Patent Issued to Tamura, Tamura FA System on Nov. 15 for "Coil and Method of Forming the Coil" (Japanese Inventors)
Nov 19, 2011; ALEXANDRIA, Va., Nov. 19 -- United States Patent no. 8,056,212, issued on Nov. 15, was assigned to Tamura Corp. (Tokyo) and...
Wipo Publishes Patent of Roche Diagnostics, List Hans, Scherer Karl-Heinz, F. Hoffmann-La Roche for "Analytical Aid" (German Inventors)
Oct 25, 2012; GENEVA, Oct. 25 -- Publication No. WO/2012/140027 was published on Oct. 18. Title of the invention: "ANALYTICAL AID." Applicants:...
WIPO ASSIGNS PATENT TO VITO (VLAAMSE INSTELLING VOOR TECHNOLOGISCH ONDERZOEK) FOR "GEOMETRIC REFERENCING OF MULTI-SPECTRAL DATA" (BELGIAN INVENTORS)
Jun 25, 2011; GENEVA, June 25 -- Publication No. WO/2011/073430 was published on June 23. Title of the invention: "GEOMETRIC REFERENCING OF...