Desalination, desalinization, or desalinisation refers to any of several processes that remove excess salt and other minerals from water. More generally, desalination may also refer to the removal of salts and minerals, as in soil desalination.
Water is desalinated in order to be converted to fresh water suitable for human consumption or irrigation. Sometimes the process produces table salt as a by-product. It is used on many seagoing ships and submarines. Most of the modern interest in desalination is focused on developing cost-effective ways of providing fresh water for human use in regions where the availability of water is limited.
Large-scale desalination typically uses large amounts of energy as well as specialized, expensive infrastructure, making it very costly compared to the use of fresh water from rivers or groundwater. The large energy reserves of many Middle Eastern countries, along with their relative water scarcity, have led to extensive construction of desalination in this region. By mid-2007, Middle Eastern desalination accounted for close to ¾ of total world capacity.
The world's largest desalination plant is the Jebel Ali Desalination Plant (Phase 2) in the United Arab Emirates. It is a dual-purpose facility that uses multi-stage flash distillation and is capable of producing 300 million cubic meters of water per year, or about 2500 gallons of water per second. The largest desalination plant in the United States is the one at Tampa Bay, Florida, which began desalinizing 25 million gallons (95000 m³) of water per day in December 2007. The Tampa Bay plant runs at around 12% the output of the Jebel Ali Desalination Plants. A January 17, 2008, article in the Wall Street Journal states, "World-wide, 13,080 desalination plants produce more than 12 billion gallons of water a day, according to the International Desalination Association."
As of July 2004, the leading method is Multi-stage flash distillation (85% of production world-wide). The traditional process used in these operations is vacuum distillation—essentially the boiling of water at less than atmospheric pressure and thus a much lower temperature than normal. This is because the boiling of a liquid occurs when the vapor pressure equals the ambient pressure and vapor pressure increases with temperature. Thus, because of the reduced temperature, energy is saved.
In the last decade, membrane processes have grown very fast, and most new facilities use reverse osmosis technology. Membrane processes use semi-permeable membranes and pressure to separate salts from water. Membrane systems typically use less energy than thermal distillation, which has led to a reduction in overall desaltination costs over the past decade. Desalination remains energy intensive, however, and future costs will continue to depend on the price of both energy and desalination technology.
Cogeneration is the process of using excess heat from power production to accomplish another task. In the sense of desalination, cogeneration is the production of potable water from seawater or brackish groundwater in an integrated, or "dual-purpose", facility in which a power plant is used as the source of energy for the desalination process. The facility’s energy production may be dedicated entirely to the production of potable water (a stand-alone facility), or excess energy may be produced and incorporated into the energy grid (a true cogeneration facility). There are various forms of cogeneration, and theoretically any form of energy production could be used. However, the majority of current and planned cogeneration desalination plants use either fossil fuels or nuclear power as their source of energy. Most plants are located in the Middle East or North Africa, due to their petroleum resources and subsidies. The advantage of dual-purpose facilities is that they can be more efficient in energy consumption, thus making desalination a more viable option for drinking water in areas of scarce water resources.
In a December 26, 2007 opinion column in the The Atlanta Journal-Constitution, Nolan Hertel, a professor of nuclear and radiological engineering at Georgia Tech, wrote, "... nuclear reactors can be used... to produce large amounts of potable water. The process is already in use in a number of places around the world, from India to Japan and Russia. Eight nuclear reactors coupled to desalination plants are operating in Japan alone... nuclear desalination plants could be a source of large amounts of potable water transported by pipelines hundreds of miles inland..."
Additionally, the current trend in dual-purpose facilities is hybrid configurations, in which the permeate from an RO desalination component is mixed with distillate from thermal desalination. Basically, two or more desalination processes are combined along with power production. Such facilities have already been implemented in Saudi Arabia at Jeddah and Yambu-Medina.
A typical aircraft carrier in the U.S. military uses nuclear power to desalinize 400,000 gallons of water per day.
A number of factors determine the capital and operating costs for desalination: capacity and type of facility, location, feed water, labor, energy, financing and concentrate disposal. Desalination stills now control pressure, temperature and brine concentrations to optimize the water extraction efficiency. Nuclear-powered desalination might be economical on a large scale, and there is a pilot plant in the former USSR.
But, critics will point to the high costs of desalination technologies, especially for developing countries, the impracticability and cost of transporting or piping massive amounts of desalinated seawater throughout the interiors of large countries, and the byproduct of concentrated seawater, which some environmentalists have claimed "is a major cause of marine pollution when dumped back into the oceans at high temperatures
It should be noted that typically the reverse osmosis technology that is used to desalinate water does not produce this "hot water" as a byproduct. Additionally, depending on the prevailing currents of receiving waters, the seawater concentrate byproduct can be diluted and dispersed to background levels within relatively short distances of the ocean outlet.
While noting that costs are falling, and generally positive about the technology for affluent areas that are proximate to oceans, one study argues that "Desalinated water may be a solution for some water-stress regions, but not for places that are poor, deep in the interior of a continent, or at high elevation. Unfortunately, that includes some of the places with biggest water problems." and "Indeed, one needs to lift the water by 2000 m, or transport it over more than 1600 km to get transport costs equal to the desalination costs. Thus, it may be more economical to transport fresh water from somewhere else than to desalinate it. In places far from the sea, like New Delhi, or in high places, like Mexico City, high transport costs would add to the high desalination costs. Desalinated water is also expensive in places that are both somewhat far from the sea and somewhat high, such as Riyadh and Harare. In places close to the ocean, the dominant cost is desalination, not transport; the process would therefore be less expensive in places like Beijing, Bangkok, Zaragoza, Phoenix, and, of course, coastal cities like Tripoli. After being desalinized at Jubail, Saudi Arabia, water is pumped inland though a pipeline to the capital city of Riyadh. For cities on the coast, desalination is being increasingly viewed as an untapped and unlimited water source.
Israel is now desalinizing water at a cost of US$0.53 per cubic meter. Singapore is desalinizing water for US$0.49 per cubic meter. Many large coastal cities in developed countries are considering the feasibility of seawater desalination, due to its cost effectiveness compared with other water supply options, which can include mandatory installation of rainwater tanks or stormwater harvesting infrastructure. Studies have shown that the desalination option is more cost-effective than large-scale recycled water for drinking, and more cost-effective in Sydney than the vastly expensive option of mandatory installation of rainwater tanks or stormwater harvesting infrastructure. The city of Perth has been successfully operating a reverse osmosis seawater desalination plant since 2006, and the West Australian government has announced that a second plant will be built to service the city's needs. A desalination plant is to be built in Australia's largest city, Sydney, and Wonthaggi, Victoria in the near future.
The Perth desalination plant is powered partially by renewable energy from the Emu Downs Wind Farm. The Sydney plant will be powered entirely from renewable sources, thereby eliminating harmful greenhouse gas emissions to the environment, a common argument used against seawater desalination due to the energy requirements of the technology. The purchase or production of renewable energy to power desalination plants naturally adds to the capital and/or operating costs of desalination. However, recent experience in Perth and Sydney indicates that the additional cost is acceptable to communities, as a city may then augment its water supply without doing environmental harm to the atmosphere. The Queensland state government recently announced that the Gold Coast desalination plant will be powered entirely from renewable sources, bringing its environmental footprint down, in line with the other major plants that will be operating around the same time, in Perth and Sydney.
In December 2007 the South Australian Government announced that it would build a seawater desalination plant for the city of Adelaide, Australia located at Port Stanvac. The desalination plant is to be funded by raising water rates to achieve full cost recovery. An online, unscientific poll showed that nearly 60% of votes cast were in favor of raising water rates to pay for desalination.
A January 17, 2008 article in the Wall. St. Journal states, "In November, Connecticut-based Poseidon Resources Corp. won a key regulatory approval to build a [US]$300 million water-desalination plant in Carlsbad, north of San Diego. The facility would be the largest in the Western Hemisphere, producing 50 million [U.S.] gallons [190,000 m³] of drinking water a day, enough to supply about 100,000 homes... Improved technology has cut the cost of desalination in half in the past decade, making it more competitive... Poseidon plans to sell the water for about [US]$950 per acre-foot [1200 m³]. That compares with an average [US]$700 an acre-foot [1200 m³] that local agencies now pay for water." $1,000 per acre-foot works out to $3.06 for 1,000 gallons, which is the unit of water measurement that residential water users are accustomed to being billed in.
According to a June 5, 2008 article in Globe and Mail, a Jordanian born chemical engineering Ph.D. student at the University of Ottawa named Mohammed Rasool Qtaisha has invented a new desalination technology that is alleged to be between 600% and 700% more efficient than current technology. According to the article, General Electric is looking into similar technology, and the U.S. National Science Foundation announced a grant to the University of Michigan to study it as well. Because the patents were still being worked out, the article was very vague about the details of this alleged technology.
One of the main environmental considerations of ocean water desalination plants is the impact of the open ocean water intakes, especially when co-located with power plants. Many proposed ocean desalination plants initial plans relied on these intakes despite perpetuating ongoing impacts on marine life. In the United States, due to a recent court ruling under the Clean Water Act these intakes are no longer viable without reducing mortality by ninety percent of the life in the ocean; the plankton, fish eggs and fish larvae. There are alternatives including beach wells that eliminate this concern, but require more energy and higher costs while limiting output. Other environmental concerns include air pollution and greenhouse gas emissions from the power plants that provide electricity and/or thermal energy to the desalination plants.
Regardless of the method used, there is always a highly concentrated waste product consisting of everything that was removed from the created fresh water. This is sometimes referred to as brine, which is also a common term for the byproduct of recycled water schemes that is often disposed of in the ocean. These concentrates are classified by the United States Environmental Protection Agency as industrial wastes. With coastal facilities, it may be possible to return it to the sea without harm if this concentrate does not exceed the normal ocean salinity gradients to which osmoregulators are accustomed. Reverse osmosis, for instance, may require the disposal of wastewater with salinity twice that of normal seawater. The benthic community cannot accommodate such an extreme change in salinity and many filter-feeding animals would be destroyed when the water is returned to the ocean. This presents an increasing problem further inland, where one needs to avoid ruining existing fresh water supplies such as ponds, rivers and aquifers. As such, proper disposal of concentrate needs to be investigated during the design phases.
To limit the environmental impact of returning the brine to the ocean, it can be diluted with another stream of water entering the ocean, such as the outfall of a wastewater treatment plant or power plant. While seawater power plant cooling water outfalls are not freshwater like wastewater treatment plant outfalls, the salinity of the brine will still be reduced. If the power plant is medium to large sized and the desalination plant is not enormous, the flow of the power plant's cooling water is likely to be at least several times larger than that of the desalination plant. Another method to reduce the increase in salinity is to spread the brine over a very large area so that there is only a slight increase in salinity. For example, once the pipeline containing the brine reaches the sea floor, it can split off into many branches, each one releasing the brine gradually along its length through small holes. This method can be used in combination with the joining of the brine with power plant or wastewater plant outfalls.
The concentrated seawater has the potential to harm ecosystems, especially marine environments in regions with low turbidity and high evaporation that already have elevated salinity. Examples of such locations are the Persian Gulf, the Red Sea and, in particular, coral lagoons of atolls and other tropical islands around the world. Because the brine is more dense than the surrounding sea water due to the higher solute concentration, discharge into water bodies means that the ecosystems on the bed of the water body are most at risk because the brine sinks and remains there long enough to damage the ecosystems. Careful re-introduction can minimize this problem. For example, for the desalination plant and ocean outlet structures to be built in Sydney from late 2007, the water authority states that the ocean outlets will be placed in locations at the seabed that will maximize the dispersal of the concentrated seawater, such that it will be indistinguishable from normal seawater between 50 meters and 75 meters from the outlet points. Sydney is fortunate to have typical oceanographic conditions off the coast that allow for such rapid dilution of the concentrated byproduct, thereby minimizing harm to the environment.
In Perth, Australia, in 2007, the Kwinana Desalination Plant was opened. The water is sucked in from the ocean at only 0.1 meter per second, which is slow enough to let fish escape. The plant provides nearly 140,000 m³ of clean water per day.
Increased water conservation and water use efficiency remain the most cost effective priority for supplying water. While comparing ocean water desalination to wastewater reclamation for drinking water shows desalination as the first option, using reclamation for irrigation and industrial use provides multiple benefits. Urban runoff and storm water capture also provide multiple benefits in treating, restoring and recharging groundwater.
As an example of newer theoretical approaches for desalination, focusing specifically on maximizing energy efficiency and cost effectiveness, Passarell Process may be considered.
Other approaches involve the use of geothermal energy. An example would be the work being done by SDSU CITI International Consortium for Advanced Technologies and Security. From an environmental and economic point of view, in most locations geothermal desalination can be preferable to using fossil groundwater or surface water for human needs, as in many regions the available surface and groundwater resources already have long been under severe stress.
Recent research in the U.S. indicates that nanotube membranes may prove to be extremely effective for water filtration and may produce a viable water desalination process that would require substantially less energy than reverse osmosis.
On June 23, 2008 it was reported that Siemens Water Technologies had developed a new technology that desalinizes one cubic meter of water while using only 1.5 kwh of energy, which, according to the report, is one half the energy that other processes use.
Research and Markets Adds Report: South Africa Water Desalination Plants Market Forecast & Opportunities, 2017.
Apr 04, 2012; Research and Markets has announced the addition of the "South Africa Water Desalination Plants Market Forecast & Opportunities,...
Research and Markets Adds Report: South Africa Water Desalination Plants Market Forecast & Opportunities, 2017
Apr 03, 2012; Research and Markets has announced the addition of the "South Africa Water Desalination Plants Market Forecast & Opportunities,...