A Chartplotter is a device used in marine navigation that integrates GPS data with an electronic navigational chart (ENC). The chartplotter displays the ENC along with the position, heading and speed of the ship, and may display additional information from radar, automatic information systems (AIS) or other sensors. As appropriate to particular marine applications, chartplotters may also display data from other sensors, such as echolocators/sonar.
Electronic chartplotters always require a computer, or sometimes multiple computers. It is a feature of the implementation, and sometimes of regulatory requirements, whether the computer is a general-purpose one that can run other applications, or must be dedicated to the chartplotter application. Especially when the chartplotter generates three-dimensional displays, as used for fishing, considerable processing power and video memory can be needed.
An individual electronic chart, or, more commonly, a database of charts, is the heart of a chartplotter. The chartplotter system can be no more accurate than its charts. While there are different formats for electronic charts, there are even more important quality and legal aspects.
Without charts that are accredited by appropriate governmental organizations, a chartplotter is an example of an Electronic Charting System (ECS). When the charts meet the technical requirements of the International Maritime Organization (IMO) and national hydrographic bodies, the chartplotter can qualify as an Electronic Chart Display and Information System(ECDIS). ECDIS legally can be substituted for paper charts while navigating in active waterways, but vessels are required to maintain paper charts if their chartplotter does not use ECDIS.
ECDIS will use IMO-standardized formats, but some chartplotters require specific data formats. A charter may use one or both types of ENC:
A basic navigational display is common to all chartplotters. Depending on intended use and characteristics of the specific chartplotter, they may have options to present such displays as three-dimensional fish-finding and bottom characteristics useful in fishing. These optional displays can be presented by commands to a single screen, causing the main display to be replaced with the one requested. Alternatively, chartplotters may offer split-screen modes on a single physical screen, or may support multiple physical displays.
They may be programmable to generate audible and visual alarms for conditions such as a potential collision, deviating significantly from the planned course, etc.
Several applications may be quite similar to chartplotters, and even run on the same physical computer. The principal function of a classic chartplotter is assisting a human pilot to plot and follow a course.
Safety-related Automatic identification systems (AIS), required on all passenger vessels and vessels of 300 tons and over, also assist in piloting, and can display on the chartplotter. AIS have collision avoidance, and avoidance of known hazards such as reefs, as their primary function. AIS depend on cooperative data communications among ships. Vessel traffic services (VTS) go even farther as safety systems, being analogous to the proactive function of air traffic control systems. VTS assist vessel traffic control in routing vessels in busy waters. Other vessel-based safety collision avoidance functions are Automatic Radar Plotting Aids (ARPA), usually a component of the radar system or an accessory to it, and coupled with the radar system input to the chartplotter.
The first chartpotter has been made in Italy from an italian firm "NAVIONICS" with the brand "GEONAV".
Vessel monitoring systems (VMS) also involve automatic transmission of position information to shore stations, but their purpose is more for tracking fishing vessels with respect to restricted and closed waters.